config system link-monitor
Description: Configure Link Health Monitor.
edit <name>
set addr-mode [ipv4|ipv6]
set srcintf {string}
set server <address1>, <address2>, ...
set protocol {option1}, {option2}, ...
set port {integer}
set gateway-ip {ipv4-address-any}
set gateway-ip6 {ipv6-address}
set source-ip {ipv4-address-any}
set source-ip6 {ipv6-address}
set http-get {string}
set http-agent {string}
set http-match {string}
set interval {integer}
set probe-timeout {integer}
set failtime {integer}
set recoverytime {integer}
set security-mode [none|authentication]
set password {password}
set packet-size {integer}
set ha-priority {integer}
set update-cascade-interface [enable|disable]
set update-static-route [enable|disable]
set status [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| addr-mode | Address mode (IPv4 or IPv6). ipv4: IPv4 mode. ipv6: IPv6 mode. |
option | - |
| srcintf | Interface that receives the traffic to be monitored. | string | Maximum length: 15 |
server <address> |
IP address of the server(s) to be monitored. Server address. |
string | Maximum length: 79 |
| protocol | Protocols used to monitor the server. ping: PING link monitor. tcp-echo: TCP echo link monitor. udp-echo: UDP echo link monitor. http: HTTP-GET link monitor. twamp: TWAMP link monitor. ping6: PING6 link monitor. |
option | - |
| port | Port number of the traffic to be used to monitor the server. | integer | Minimum value: 1 Maximum value: 65535 |
| gateway-ip | Gateway IP address used to probe the server. | ipv4-address-any | Not Specified |
| gateway-ip6 | Gateway IPv6 address used to probe the server. | ipv6-address | Not Specified |
| source-ip | Source IP address used in packet to the server. | ipv4-address-any | Not Specified |
| source-ip6 | Source IPv6 address used in packet to the server. | ipv6-address | Not Specified |
| http-get | If you are monitoring an HTML server you can send an HTTP-GET request with a custom string. Use this option to define the string. | string | Maximum length: 1024 |
| http-agent | String in the http-agent field in the HTTP header. | string | Maximum length: 1024 |
| http-match | String that you expect to see in the HTTP-GET requests of the traffic to be monitored. | string | Maximum length: 1024 |
| interval | Detection interval in milliseconds (500 - 3600 * 1000 msec, default = 500). | integer | Minimum value: 500 Maximum value: 3600000 |
| probe-timeout | Time to wait before a probe packet is considered lost (500 - 5000 msec, default = 500). | integer | Minimum value: 500 Maximum value: 5000 |
| failtime | Number of retry attempts before the server is considered down (1 - 10, default = 5) | integer | Minimum value: 1 Maximum value: 3600 |
| recoverytime | Number of successful responses received before server is considered recovered (1 - 10, default = 5). | integer | Minimum value: 1 Maximum value: 3600 |
| security-mode | Twamp controller security mode. none: Unauthenticated mode. authentication: Authenticated mode. |
option | - |
| password | Twamp controller password in authentication mode | password | Not Specified |
| packet-size | Packet size of a twamp test session, | integer | Minimum value: 64 Maximum value: 1024 |
| ha-priority | HA election priority (1 - 50). | integer | Minimum value: 1 Maximum value: 50 |
| update-cascade-interface | Enable/disable update cascade interface. enable: Enable update cascade interface. disable: Disable update cascade interface. |
option | - |
| update-static-route | Enable/disable updating the static route. enable: Enable updating the static route. disable: Disable updating the static route. |
option | - |
| status | Enable/disable this link monitor. enable: Enable this link monitor. disable: Disable this link monitor. |
option | - |
config system link-monitor
Description: Configure Link Health Monitor.
edit <name>
set addr-mode [ipv4|ipv6]
set srcintf {string}
set server <address1>, <address2>, ...
set protocol {option1}, {option2}, ...
set port {integer}
set gateway-ip {ipv4-address-any}
set gateway-ip6 {ipv6-address}
set source-ip {ipv4-address-any}
set source-ip6 {ipv6-address}
set http-get {string}
set http-agent {string}
set http-match {string}
set interval {integer}
set probe-timeout {integer}
set failtime {integer}
set recoverytime {integer}
set security-mode [none|authentication]
set password {password}
set packet-size {integer}
set ha-priority {integer}
set update-cascade-interface [enable|disable]
set update-static-route [enable|disable]
set status [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| addr-mode | Address mode (IPv4 or IPv6). ipv4: IPv4 mode. ipv6: IPv6 mode. |
option | - |
| srcintf | Interface that receives the traffic to be monitored. | string | Maximum length: 15 |
server <address> |
IP address of the server(s) to be monitored. Server address. |
string | Maximum length: 79 |
| protocol | Protocols used to monitor the server. ping: PING link monitor. tcp-echo: TCP echo link monitor. udp-echo: UDP echo link monitor. http: HTTP-GET link monitor. twamp: TWAMP link monitor. ping6: PING6 link monitor. |
option | - |
| port | Port number of the traffic to be used to monitor the server. | integer | Minimum value: 1 Maximum value: 65535 |
| gateway-ip | Gateway IP address used to probe the server. | ipv4-address-any | Not Specified |
| gateway-ip6 | Gateway IPv6 address used to probe the server. | ipv6-address | Not Specified |
| source-ip | Source IP address used in packet to the server. | ipv4-address-any | Not Specified |
| source-ip6 | Source IPv6 address used in packet to the server. | ipv6-address | Not Specified |
| http-get | If you are monitoring an HTML server you can send an HTTP-GET request with a custom string. Use this option to define the string. | string | Maximum length: 1024 |
| http-agent | String in the http-agent field in the HTTP header. | string | Maximum length: 1024 |
| http-match | String that you expect to see in the HTTP-GET requests of the traffic to be monitored. | string | Maximum length: 1024 |
| interval | Detection interval in milliseconds (500 - 3600 * 1000 msec, default = 500). | integer | Minimum value: 500 Maximum value: 3600000 |
| probe-timeout | Time to wait before a probe packet is considered lost (500 - 5000 msec, default = 500). | integer | Minimum value: 500 Maximum value: 5000 |
| failtime | Number of retry attempts before the server is considered down (1 - 10, default = 5) | integer | Minimum value: 1 Maximum value: 3600 |
| recoverytime | Number of successful responses received before server is considered recovered (1 - 10, default = 5). | integer | Minimum value: 1 Maximum value: 3600 |
| security-mode | Twamp controller security mode. none: Unauthenticated mode. authentication: Authenticated mode. |
option | - |
| password | Twamp controller password in authentication mode | password | Not Specified |
| packet-size | Packet size of a twamp test session, | integer | Minimum value: 64 Maximum value: 1024 |
| ha-priority | HA election priority (1 - 50). | integer | Minimum value: 1 Maximum value: 50 |
| update-cascade-interface | Enable/disable update cascade interface. enable: Enable update cascade interface. disable: Disable update cascade interface. |
option | - |
| update-static-route | Enable/disable updating the static route. enable: Enable updating the static route. disable: Disable updating the static route. |
option | - |
| status | Enable/disable this link monitor. enable: Enable this link monitor. disable: Disable this link monitor. |
option | - |