config wanopt cache-service
Description: Designate cache-service for wan-optimization and webcache.
set prefer-scenario [balance|prefer-speed|...]
set collaboration [enable|disable]
set device-id {string}
set acceptable-connections [any|peers]
config dst-peer
Description: Modify cache-service destination peer list.
edit <device-id>
set auth-type {integer}
set encode-type {integer}
set priority {integer}
set ip {ipv4-address-any}
next
end
config src-peer
Description: Modify cache-service source peer list.
edit <device-id>
set auth-type {integer}
set encode-type {integer}
set priority {integer}
set ip {ipv4-address-any}
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefer-scenario | Set the preferred cache behavior towards the balance between latency and hit-ratio. balance: Balance between speed and cache hit ratio. prefer-speed: Prefer response speed at the expense of increased cache bypasses. prefer-cache: Prefer improving hit-ratio through increasing latency tolerance. |
option | - |
| collaboration | Enable/disable cache-collaboration between cache-service clusters. enable: Enable cache cache-collaboration. disable: Disable cache cache-collaboration. |
option | - |
| device-id | Set identifier for this cache device. | string | Maximum length: 35 |
| acceptable-connections | Set strategy when accepting cache collaboration connection. any: We can accept any cache-collaboration connection. peers: We can only accept connections that are already in src-peers. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-type | Set authentication type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| encode-type | Set encode type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| priority | Set priority for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| ip | Set cluster IP address of this peer. | ipv4-address-any | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-type | Set authentication type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| encode-type | Set encode type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| priority | Set priority for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| ip | Set cluster IP address of this peer. | ipv4-address-any | Not Specified |
config wanopt cache-service
Description: Designate cache-service for wan-optimization and webcache.
set prefer-scenario [balance|prefer-speed|...]
set collaboration [enable|disable]
set device-id {string}
set acceptable-connections [any|peers]
config dst-peer
Description: Modify cache-service destination peer list.
edit <device-id>
set auth-type {integer}
set encode-type {integer}
set priority {integer}
set ip {ipv4-address-any}
next
end
config src-peer
Description: Modify cache-service source peer list.
edit <device-id>
set auth-type {integer}
set encode-type {integer}
set priority {integer}
set ip {ipv4-address-any}
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefer-scenario | Set the preferred cache behavior towards the balance between latency and hit-ratio. balance: Balance between speed and cache hit ratio. prefer-speed: Prefer response speed at the expense of increased cache bypasses. prefer-cache: Prefer improving hit-ratio through increasing latency tolerance. |
option | - |
| collaboration | Enable/disable cache-collaboration between cache-service clusters. enable: Enable cache cache-collaboration. disable: Disable cache cache-collaboration. |
option | - |
| device-id | Set identifier for this cache device. | string | Maximum length: 35 |
| acceptable-connections | Set strategy when accepting cache collaboration connection. any: We can accept any cache-collaboration connection. peers: We can only accept connections that are already in src-peers. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-type | Set authentication type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| encode-type | Set encode type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| priority | Set priority for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| ip | Set cluster IP address of this peer. | ipv4-address-any | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-type | Set authentication type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| encode-type | Set encode type for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| priority | Set priority for this peer. | integer | Minimum value: 0 Maximum value: 255 |
| ip | Set cluster IP address of this peer. | ipv4-address-any | Not Specified |