config system ipsec-aggregate
Description: Configure an aggregate of IPsec tunnels.
edit <name>
set member <tunnel-name1>, <tunnel-name2>, ...
set algorithm [L3|L4|...]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
member <tunnel-name> |
Member tunnels of the aggregate. Tunnel name. |
string | Maximum length: 79 |
| algorithm | Frame distribution algorithm. L3: Use layer 3 address for distribution. L4: Use layer 4 information for distribution. round-robin: Per-packet round-robin distribution. redundant: Use first tunnel that is up for all traffic. |
option | - |
config system ipsec-aggregate
Description: Configure an aggregate of IPsec tunnels.
edit <name>
set member <tunnel-name1>, <tunnel-name2>, ...
set algorithm [L3|L4|...]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
member <tunnel-name> |
Member tunnels of the aggregate. Tunnel name. |
string | Maximum length: 79 |
| algorithm | Frame distribution algorithm. L3: Use layer 3 address for distribution. L4: Use layer 4 information for distribution. round-robin: Per-packet round-robin distribution. redundant: Use first tunnel that is up for all traffic. |
option | - |