config vpn ipsec manualkey
Description: Configure IPsec manual keys.
edit <name>
set interface {string}
set remote-gw {ipv4-address}
set local-gw {ipv4-address-any}
set authentication [null|md5|...]
set encryption [null|des|...]
set authkey {user}
set enckey {user}
set localspi {user}
set remotespi {user}
set npu-offload [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| interface | Name of the physical, aggregate, or VLAN interface. | string | Maximum length: 15 |
| remote-gw | Peer gateway. | ipv4-address | Not Specified |
| local-gw | Local gateway. | ipv4-address-any | Not Specified |
| authentication | Authentication algorithm. Must be the same for both ends of the tunnel. null: Null. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| encryption | Encryption algorithm. Must be the same for both ends of the tunnel. null: Null. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. aria128: ARIA128. aria192: ARIA192. aria256: ARIA256. seed: Seed. |
option | - |
| authkey | Hexadecimal authentication key in 16-digit (8-byte) segments separated by hyphens. | user | Not Specified |
| enckey | Hexadecimal encryption key in 16-digit (8-byte) segments separated by hyphens. | user | Not Specified |
| localspi | Local SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules. | user | Not Specified |
| remotespi | Remote SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules. | user | Not Specified |
| npu-offload | Enable/disable NPU offloading. enable: Enable NPU offloading. disable: Disable NPU offloading. |
option | - |
config vpn ipsec manualkey
Description: Configure IPsec manual keys.
edit <name>
set interface {string}
set remote-gw {ipv4-address}
set local-gw {ipv4-address-any}
set authentication [null|md5|...]
set encryption [null|des|...]
set authkey {user}
set enckey {user}
set localspi {user}
set remotespi {user}
set npu-offload [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| interface | Name of the physical, aggregate, or VLAN interface. | string | Maximum length: 15 |
| remote-gw | Peer gateway. | ipv4-address | Not Specified |
| local-gw | Local gateway. | ipv4-address-any | Not Specified |
| authentication | Authentication algorithm. Must be the same for both ends of the tunnel. null: Null. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| encryption | Encryption algorithm. Must be the same for both ends of the tunnel. null: Null. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. aria128: ARIA128. aria192: ARIA192. aria256: ARIA256. seed: Seed. |
option | - |
| authkey | Hexadecimal authentication key in 16-digit (8-byte) segments separated by hyphens. | user | Not Specified |
| enckey | Hexadecimal encryption key in 16-digit (8-byte) segments separated by hyphens. | user | Not Specified |
| localspi | Local SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules. | user | Not Specified |
| remotespi | Remote SPI, a hexadecimal 8-digit (4-byte) tag. Discerns between two traffic streams with different encryption rules. | user | Not Specified |
| npu-offload | Enable/disable NPU offloading. enable: Enable NPU offloading. disable: Disable NPU offloading. |
option | - |