config router multicast

Configure router multicast.

config router multicast

Description: Configure router multicast.

set route-threshold {integer}

set route-limit {integer}

set multicast-routing [enable|disable]

config pim-sm-global

Description: PIM sparse-mode global settings.

set message-interval {integer}

set join-prune-holdtime {integer}

set accept-register-list {string}

set accept-source-list {string}

set bsr-candidate [enable|disable]

set bsr-interface {string}

set bsr-priority {integer}

set bsr-hash {integer}

set bsr-allow-quick-refresh [enable|disable]

set cisco-register-checksum [enable|disable]

set cisco-register-checksum-group {string}

set cisco-crp-prefix [enable|disable]

set cisco-ignore-rp-set-priority [enable|disable]

set register-rp-reachability [enable|disable]

set register-source [disable|interface|...]

set register-source-interface {string}

set register-source-ip {ipv4-address}

set register-supression {integer}

set null-register-retries {integer}

set rp-register-keepalive {integer}

set spt-threshold [enable|disable]

set spt-threshold-group {string}

set ssm [enable|disable]

set ssm-range {string}

set register-rate-limit {integer}

config rp-address

Description: Statically configure RP addresses.

edit <id>

set ip-address {ipv4-address}

set group {string}

next

end

end

config interface

Description: PIM interfaces.

edit <name>

set ttl-threshold {integer}

set pim-mode [sparse-mode|dense-mode]

set passive [enable|disable]

set bfd [enable|disable]

set neighbour-filter {string}

set hello-interval {integer}

set hello-holdtime {integer}

set cisco-exclude-genid [enable|disable]

set dr-priority {integer}

set propagation-delay {integer}

set state-refresh-interval {integer}

set rp-candidate [enable|disable]

set rp-candidate-group {string}

set rp-candidate-priority {integer}

set rp-candidate-interval {integer}

set multicast-flow {string}

set static-group {string}

set rpf-nbr-fail-back [enable|disable]

set rpf-nbr-fail-back-filter {string}

config join-group

Description: Join multicast groups.

edit <address>

next

end

config igmp

Description: IGMP configuration options.

set access-group {string}

set version [3|2|...]

set immediate-leave-group {string}

set last-member-query-interval {integer}

set last-member-query-count {integer}

set query-max-response-time {integer}

set query-interval {integer}

set query-timeout {integer}

set router-alert-check [enable|disable]

end

next

end

end

config router multicast

Parameter	Description	Type	Size
route-threshold	Generate warnings when the number of multicast routes exceeds this number, must not be greater than route-limit.	integer	Minimum value: 1 Maximum value: 2147483647
route-limit	Maximum number of multicast routes.	integer	Minimum value: 1 Maximum value: 2147483647
multicast-routing	Enable/disable IP multicast routing.	option	-
	Option Description enable Enable IP multicast routing. disable Disable IP multicast routing.

config pim-sm-global

Parameter	Description	Type	Size
message-interval	Period of time between sending periodic PIM join/prune messages in seconds .	integer	Minimum value: 1 Maximum value: 65535
join-prune-holdtime	Join/prune holdtime .	integer	Minimum value: 1 Maximum value: 65535
accept-register-list	Sources allowed to register packets with this Rendezvous Point (RP).	string	Maximum length: 35
accept-source-list	Sources allowed to send multicast traffic.	string	Maximum length: 35
bsr-candidate	Enable/disable allowing this router to become a bootstrap router (BSR).	option	-
	Option Description enable Allow this router to function as a BSR. disable Do not allow this router to function as a BSR.
bsr-interface	Interface to advertise as candidate BSR.	string	Maximum length: 15
bsr-priority	BSR priority .	integer	Minimum value: 0 Maximum value: 255
bsr-hash	BSR hash length .	integer	Minimum value: 0 Maximum value: 32
bsr-allow-quick-refresh	Enable/disable accept BSR quick refresh packets from neighbors.	option	-
	Option Description enable Allow quick refresh packets. disable Do not allow quick refresh packets.
cisco-register-checksum	Checksum entire register packet(for old Cisco IOS compatibility).	option	-
	Option Description enable register checksum entire packet. disable Do not register checksum entire packet.
cisco-register-checksum-group	Cisco register checksum only these groups.	string	Maximum length: 35
cisco-crp-prefix	Enable/disable making candidate RP compatible with old Cisco IOS.	option	-
	Option Description enable Do not allow sending group prefix of zero. disable Allow sending group prefix of zero.
cisco-ignore-rp-set-priority	Use only hash for RP selection (compatibility with old Cisco IOS).	option	-
	Option Description enable Ignore RP-SET priority value. disable Do not ignore RP-SET priority value.
register-rp-reachability	Enable/disable check RP is reachable before registering packets.	option	-
	Option Description enable Check target RP is unicast reachable before registering. disable Do not check RP unicast reachability.
register-source	Override source address in register packets.	option	-
	Option Description disable Use source address of RPF interface. interface Use primary IP of an interface. ip-address Use a local IP address.
register-source-interface	Override with primary interface address.	string	Maximum length: 15
register-source-ip	Override with local IP address.	ipv4-address	Not Specified
register-supression	Period of time to honor register-stop message .	integer	Minimum value: 1 Maximum value: 65535
null-register-retries	Maximum retries of null register .	integer	Minimum value: 1 Maximum value: 20
rp-register-keepalive	Timeout for RP receiving data on .	integer	Minimum value: 1 Maximum value: 65535
spt-threshold	Enable/disable switching to source specific trees.	option	-
	Option Description enable Switch to Source tree when available. disable Do not switch to Source tree when available.
spt-threshold-group	Groups allowed to switch to source tree.	string	Maximum length: 35
ssm	Enable/disable source specific multicast.	option	-
	Option Description enable Allow source specific multicast. disable Do not allow source specific multicast.
ssm-range	Groups allowed to source specific multicast.	string	Maximum length: 35
register-rate-limit	Limit of packets/sec per source registered through this RP .	integer	Minimum value: 0 Maximum value: 65535

config rp-address

Parameter	Description	Type	Size
ip-address	RP router address.	ipv4-address	Not Specified
group	Groups to use this RP.	string	Maximum length: 35

config interface

Parameter	Description	Type	Size
ttl-threshold	Minimum TTL of multicast packets that will be forwarded .	integer	Minimum value: 1 Maximum value: 255
pim-mode	PIM operation mode.	option	-
	Option Description sparse-mode sparse-mode dense-mode dense-mode
passive	Enable/disable listening to IGMP but not participating in PIM.	option	-
	Option Description enable Listen only. disable Participate in PIM.
bfd	Enable/disable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD).	option	-
	Option Description enable Enable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD). disable Disable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD).
neighbour-filter	Routers acknowledged as neighbor routers.	string	Maximum length: 35
hello-interval	Interval between sending PIM hello messages .	integer	Minimum value: 1 Maximum value: 65535
hello-holdtime	Time before old neighbor information expires .	integer	Minimum value: 1 Maximum value: 65535
cisco-exclude-genid	Exclude GenID from hello packets (compatibility with old Cisco IOS).	option	-
	Option Description enable Do not send GenID. disable Send GenID according to standard.
dr-priority	DR election priority.	integer	Minimum value: 1 Maximum value: 4294967295
propagation-delay	Delay flooding packets on this interface .	integer	Minimum value: 100 Maximum value: 5000
state-refresh-interval	Interval between sending state-refresh packets .	integer	Minimum value: 1 Maximum value: 100
rp-candidate	Enable/disable compete to become RP in elections.	option	-
	Option Description enable Compete for RP elections. disable Do not compete for RP elections.
rp-candidate-group	Multicast groups managed by this RP.	string	Maximum length: 35
rp-candidate-priority	Router's priority as RP.	integer	Minimum value: 0 Maximum value: 255
rp-candidate-interval	RP candidate advertisement interval .	integer	Minimum value: 1 Maximum value: 16383
multicast-flow	Acceptable source for multicast group.	string	Maximum length: 35
static-group	Statically set multicast groups to forward out.	string	Maximum length: 35
rpf-nbr-fail-back	Enable/disable fail back for RPF neighbor query.	option	-
	Option Description enable Enable fail back for RPF neighbor query. disable Disable fail back for RPF neighbor query.
rpf-nbr-fail-back-filter	Filter for fail back RPF neighbors.	string	Maximum length: 35

config igmp

Parameter	Description	Type	Size
access-group	Groups IGMP hosts are allowed to join.	string	Maximum length: 35
version	Maximum version of IGMP to support.	option	-
	Option Description 3 Version 3 and lower. 2 Version 2 and lower. 1 Version 1.
immediate-leave-group	Groups to drop membership for immediately after receiving IGMPv2 leave.	string	Maximum length: 35
last-member-query-interval	Timeout between IGMPv2 leave and removing group .	integer	Minimum value: 1 Maximum value: 65535
last-member-query-count	Number of group specific queries before removing group .	integer	Minimum value: 2 Maximum value: 7
query-max-response-time	Maximum time to wait for a IGMP query response .	integer	Minimum value: 1 Maximum value: 25
query-interval	Interval between queries to IGMP hosts .	integer	Minimum value: 1 Maximum value: 65535
query-timeout	Timeout between queries before becoming querier for network .	integer	Minimum value: 60 Maximum value: 900
router-alert-check	Enable/disable require IGMP packets contain router alert option.	option	-
	Option Description enable Require Router Alert option in IGMP packets. disable don't require Router Alert option in IGMP packets