config system gre-tunnel
Description: Configure GRE tunnel.
edit <name>
set interface {string}
set ip-version [4|6]
set remote-gw6 {ipv6-address}
set local-gw6 {ipv6-address}
set remote-gw {ipv4-address}
set local-gw {ipv4-address-any}
set dscp-copying [disable|enable]
set diffservcode {user}
set keepalive-interval {integer}
set keepalive-failtimes {integer}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| interface | Interface name. | string | Maximum length: 15 |
| ip-version | IP version to use for VPN interface. 4: Use IPv4 addressing for gateways. 6: Use IPv6 addressing for gateways. |
option | - |
| remote-gw6 | IPv6 address of the remote gateway. | ipv6-address | Not Specified |
| local-gw6 | IPv6 address of the local gateway. | ipv6-address | Not Specified |
| remote-gw | IP address of the remote gateway. | ipv4-address | Not Specified |
| local-gw | IP address of the local gateway. | ipv4-address-any | Not Specified |
| dscp-copying | Enable/disable DSCP copying. disable: Disable DSCP copying. enable: Enable DSCP copying. |
option | - |
| diffservcode | DiffServ setting to be applied to GRE tunnel outer IP header. | user | Not Specified |
| keepalive-interval | Keepalive message interval (0 - 32767, 0 = disabled). | integer | Minimum value: 0 Maximum value: 32767 |
| keepalive-failtimes | Number of consecutive unreturned keepalive messages before a GRE connection is considered down (1 - 255). | integer | Minimum value: 1 Maximum value: 255 |
config system gre-tunnel
Description: Configure GRE tunnel.
edit <name>
set interface {string}
set ip-version [4|6]
set remote-gw6 {ipv6-address}
set local-gw6 {ipv6-address}
set remote-gw {ipv4-address}
set local-gw {ipv4-address-any}
set dscp-copying [disable|enable]
set diffservcode {user}
set keepalive-interval {integer}
set keepalive-failtimes {integer}
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| interface | Interface name. | string | Maximum length: 15 |
| ip-version | IP version to use for VPN interface. 4: Use IPv4 addressing for gateways. 6: Use IPv6 addressing for gateways. |
option | - |
| remote-gw6 | IPv6 address of the remote gateway. | ipv6-address | Not Specified |
| local-gw6 | IPv6 address of the local gateway. | ipv6-address | Not Specified |
| remote-gw | IP address of the remote gateway. | ipv4-address | Not Specified |
| local-gw | IP address of the local gateway. | ipv4-address-any | Not Specified |
| dscp-copying | Enable/disable DSCP copying. disable: Disable DSCP copying. enable: Enable DSCP copying. |
option | - |
| diffservcode | DiffServ setting to be applied to GRE tunnel outer IP header. | user | Not Specified |
| keepalive-interval | Keepalive message interval (0 - 32767, 0 = disabled). | integer | Minimum value: 0 Maximum value: 32767 |
| keepalive-failtimes | Number of consecutive unreturned keepalive messages before a GRE connection is considered down (1 - 255). | integer | Minimum value: 1 Maximum value: 255 |