Adding a FortiExtender

To add a FortiExtender to the FortiGate, create a virtual FortiExtender interface, then add a FortiExtender and assign the interface to the modem. Like other interface types, the FortiExtender interface can be used in static routes, SD-WAN (see Manage dual FortiExtender devices), policies, and other functions.

To create a virtual FortiExtender interface in the GUI:

1. Go to Network > Interfaces and click Create New > FortiExtender.

2. Enter a name for the interface.

3. Configure the remaining settings as needed. See Interface settings for more details.

   

4. Click OK.

To edit a FortiExtender in the GUI:

FortiExtenders can only be manually added in the CLI.

1. Go to Network > FortiExtender and edit the FortiExtender.

2. Adjust the settings as required. See the FortiExtender Administration Guide for more information.

   

3. Click OK.

4. In the extenders list, right-click on the FortiExtender and select Diagnostics and Tools to review the modem and SIM status, and other details about the FortiExtender.

To create a virtual FortiExtender interface in the CLI:

config system interface
    edit "fext"
        set vdom "root"
        set mode dhcp
        set allowaccess ping https speed-test
        set type fext-wan
        set estimated-upstream-bandwidth 1000
        set estimated-downstream-bandwidth 500
    next
end

To configure the FortiExtender in the CLI:

config extender-controller extender
    edit "FX211E0000000000"
        set id "FX211E0000000000"
        set authorized enable
        config modem1
            set ifname "fext"
        end
    next
end

To verify the modem settings in the CLI:

get extender modem-status FX211E0000000000 1
Modem 0:
    physical_port:       2-1.2
    manufacture:         Sierra Wireless, Incorporated
    product:             Sierra Wireless, Incorporated
    ....

For information about configuring FortiExtender, see the FortiExtender Admin Guide (FGT-Managed) and Admin Guide (Standalone).