Credential phishing prevention

When credential phishing prevention is enabled, the FortiGate scans for corporate credentials submitted to external websites and compares them to sensitive credentials stored in the corporate domain controller. Based on the configured antiphishing rules in proxy mode web filter profiles, the FortiGate will block the URL or alert the user if the credentials match ones that are stored on the corporate domain controller.

• The corporate domain controller must be configured on the credential-store.
• Credentials can be matched based on sAMAccountName, user principal name (UPN), or down-level logon name.
• The antiphishing profile defines the corporate domain controller, antiphishing check option, default action if no rules match, antiphishing status, and so on.
• Inspection entries in the profile define what action occurs when the submission request matches the specified FortiGuard categories.
• The profile scans for pre-defined and custom username and password fields in the HTTP request, such as username, auth, and password. You can evaluate custom fields by configuring custom patterns.
• The URL filter defines individual URLs that the antiphish action (block or log) is applied to when the URL submission request matches.

Web-based URL filter actions and FortiGuard category-based filtering have higher priority than antiphishing URL filter actions and FortiGuard filtering: If a request is blocked by the web-based URL filter or FortiGuard filter, there is no further antiphishing scanning. Antiphishing scanning only happens after the web-based URL filtes and FortiGuard filters allow the traffic. If a submission matches an entry in the URL filter table that has an antiphishing action, the defined action is taken. No further FortiGuard category-based rules are applied. Like firewall rules, the URL filter table and Fortiguard category-based antiphishing rules use a top-down priority. The rule that matches first is the one that is used.

In this example, URLs that match FortiGuard category 37 (social networking) will be blocked and other categories will be logged.

To configure credential phishing prevention:

1. Configure the corporate domain controller:

   config credential-store domain-controller
       edit "win2016"
           set hostname "win2016"
           set domain-name "corpserver.local"
           set username "Administrator"
           set password **********
           set ip <server_ip>
       next
   end
   

   The hostname and the domain-name are case sensitive.

2. Configure the antiphishing profile, which includes the FortiGuard category rule:

   config webfilter profile
       edit <profile-name>
           set feature-set proxy
           ...
           config web
               ...
           end
           config antiphish
               set status enable
               set domain-controller "win2016"
               set default-action block
               set check-uri enable
               set check-basic-auth enable
               set max-body-len 65536
               config inspection-entries
                   edit "inspect-37"
                       set fortiguard-category 37
                       set action block
                   next
                   edit "inspect-others"
                       set fortiguard-category all
                       set action log
                   next
               end
               config custom-patterns
                   edit "customer-name"
                       set category username
                   next
                   edit "customer-passwd"
                      set category password
                   next
               end
           end
           ...
           set web-antiphishing-log enable
       next
   end

   • check-uri enables support for scanning HTTP GET URI parameters.
   • check-basic-auth enables support for scanning the HTTP Basic Auth field.
3. Configure the URL filter to scan specific URLs.

   The antiphish action is added to the URL filter table entry, and the URL filter is applied to the webfilter profile.

   config webfilter urlfilter
       edit 1
           set name "antiphish-table"
           config entries
               edit 1
                   set url "www.example.com"
                   set type simple
                   set antiphish-action block
                   set status enable
                   set referrer-host ''
               next
           end
       next
   end
   config webfilter profile
       edit "<profile-name>"
           config web
               set urlfilter-table 1
           end
           ...
       next
   end

4. Optionally, define custom patterns to scan fields other than the built-in username and password keywords are needed:

   config webfilter profile
       edit "<profile-name>"
           config custom-patterns
                   edit "customer-name"
                       set category username
                   next
                   edit "customer-passwd"
                      set category password
                   next
               end
           end
       next
   end