config wireless-controller inter-controller

Configure inter wireless controller operation.

config wireless-controller inter-controller

Description: Configure inter wireless controller operation.

set inter-controller-mode [disable|l2-roaming|...]

set inter-controller-key {password}

set inter-controller-pri [primary|secondary]

set fast-failover-max {integer}

set fast-failover-wait {integer}

config inter-controller-peer

Description: Fast failover peer wireless controller list.

edit <id>

set peer-ip {ipv4-address}

set peer-port {integer}

set peer-priority [primary|secondary]

next

end

end

config wireless-controller inter-controller

Parameter	Description	Type	Size	Default
inter-controller-mode	Configure inter-controller mode (disable, l2-roaming, 1+1, default = disable).	option	-	disable
	Option Description disable Disable inter-controller mode. l2-roaming Enable layer 2 roaming support between inter-controllers. 1+1 Enable 1+1 fast failover mode.
inter-controller-key	Secret key for inter-controller communications.	password	Not Specified
inter-controller-pri	Configure inter-controller's priority (primary or secondary, default = primary).	option	-	primary
	Option Description primary Primary fast failover mode. secondary Secondary fast failover mode.
fast-failover-max	Maximum number of retransmissions for fast failover HA messages between peer wireless controllers (3 - 64, default = 10).	integer	Minimum value: 3 Maximum value: 64	10
fast-failover-wait	Minimum wait time before an AP transitions from secondary controller to primary controller (10 - 86400 sec, default = 10).	integer	Minimum value: 10 Maximum value: 86400	10

Parameter	Description	Type	Size	Default
peer-ip	Peer wireless controller's IP address.	ipv4-address	Not Specified	0.0.0.0
peer-port	Port used by the wireless controller's for inter-controller communications (1024 - 49150, default = 5246).	integer	Minimum value: 1024 Maximum value: 49150	5246
peer-priority	Peer wireless controller's priority (primary or secondary, default = primary).	option	-	primary
	Option Description primary Primary fast failover mode. secondary Secondary fast failover mode.