config wireless-controller wtp
Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
config wireless-controller wtp
Description: Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
edit <wtp-id>
set index {integer}
set uuid {uuid}
set admin [discovered|disable|...]
set name {string}
set location {string}
set region {string}
set region-x {string}
set region-y {string}
set firmware-provision {string}
set wtp-profile {string}
set apcfg-profile {string}
set bonjour-profile {string}
set override-led-state [enable|disable]
set led-state [enable|disable]
set override-wan-port-mode [enable|disable]
set wan-port-mode [wan-lan|wan-only]
set override-ip-fragment [enable|disable]
set ip-fragment-preventing {option1}, {option2}, ...
set tun-mtu-uplink {integer}
set tun-mtu-downlink {integer}
set override-split-tunnel [enable|disable]
set split-tunneling-acl-path [tunnel|local]
set split-tunneling-acl-local-ap-subnet [enable|disable]
config split-tunneling-acl
Description: Split tunneling ACL filter list.
edit <id>
set dest-ip {ipv4-classnet}
next
end
set override-lan [enable|disable]
config lan
Description: WTP LAN port mapping.
set port-mode [offline|nat-to-wan|...]
set port-ssid {string}
set port1-mode [offline|nat-to-wan|...]
set port1-ssid {string}
set port2-mode [offline|nat-to-wan|...]
set port2-ssid {string}
set port3-mode [offline|nat-to-wan|...]
set port3-ssid {string}
set port4-mode [offline|nat-to-wan|...]
set port4-ssid {string}
set port5-mode [offline|nat-to-wan|...]
set port5-ssid {string}
set port6-mode [offline|nat-to-wan|...]
set port6-ssid {string}
set port7-mode [offline|nat-to-wan|...]
set port7-ssid {string}
set port8-mode [offline|nat-to-wan|...]
set port8-ssid {string}
set port-esl-mode [offline|nat-to-wan|...]
set port-esl-ssid {string}
end
set override-allowaccess [enable|disable]
set allowaccess {option1}, {option2}, ...
set override-login-passwd-change [enable|disable]
set login-passwd-change [yes|default|...]
set login-passwd {password}
config radio-1
Description: Configuration options for radio 1.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set auto-power-target {string}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [tunnel|bridge|...]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
set drma-manual-mode [ap|monitor|...]
end
config radio-2
Description: Configuration options for radio 2.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set auto-power-target {string}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [tunnel|bridge|...]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
set drma-manual-mode [ap|monitor|...]
end
config radio-3
Description: Configuration options for radio 3.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set auto-power-target {string}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [tunnel|bridge|...]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
set drma-manual-mode [ap|monitor|...]
end
config radio-4
Description: Configuration options for radio 4.
set override-band [enable|disable]
set band [802.11a|802.11b|...]
set override-txpower [enable|disable]
set auto-power-level [enable|disable]
set auto-power-high {integer}
set auto-power-low {integer}
set auto-power-target {string}
set power-level {integer}
set override-vaps [enable|disable]
set vap-all [tunnel|bridge|...]
set vaps <name1>, <name2>, ...
set override-channel [enable|disable]
set channel <chan1>, <chan2>, ...
set drma-manual-mode [ap|monitor|...]
end
set image-download [enable|disable]
set mesh-bridge-enable [default|enable|...]
set coordinate-latitude {string}
set coordinate-longitude {string}
next
end
config wireless-controller wtp
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
index |
Index (0 - 4294967295). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
|
uuid |
Universally Unique Identifier (UUID; automatically assigned but can be manually reset). |
uuid |
Not Specified |
00000000-0000-0000-0000-000000000000 |
||||||||
|
admin |
Configure how the FortiGate operating as a wireless controller discovers and manages this WTP, AP or FortiAP. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
name |
WTP, AP or FortiAP configuration name. |
string |
Maximum length: 35 |
|
||||||||
|
location |
Field for describing the physical location of the WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|
||||||||
|
region |
Region name WTP is associated with. |
string |
Maximum length: 35 |
|
||||||||
|
region-x |
Relative horizontal region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
0 |
||||||||
|
region-y |
Relative vertical region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
0 |
||||||||
|
firmware-provision |
Firmware version to provision to this FortiAP on bootup (major.minor.build, i.e. 6.2.1234). |
string |
Maximum length: 35 |
|
||||||||
|
wtp-profile |
WTP profile name to apply to this WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|
||||||||
|
apcfg-profile |
AP local configuration profile name. |
string |
Maximum length: 35 |
|
||||||||
|
bonjour-profile |
Bonjour profile name. |
string |
Maximum length: 35 |
|
||||||||
|
override-led-state |
Enable to override the profile LED state setting for this FortiAP. You must enable this option to use the led-state command to turn off the FortiAP's LEDs. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
led-state |
Enable to allow the FortiAPs LEDs to light. Disable to keep the LEDs off. You may want to keep the LEDs off so they are not distracting in low light areas etc. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
override-wan-port-mode |
Enable/disable overriding the wan-port-mode in the WTP profile. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
wan-port-mode |
Enable/disable using the FortiAP WAN port as a LAN port. |
option |
- |
wan-only |
||||||||
|
|
|
|||||||||||
|
override-ip-fragment |
Enable/disable overriding the WTP profile IP fragment prevention setting. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
ip-fragment-preventing |
Method(s) by which IP fragmentation is prevented for control and data packets through CAPWAP tunnel (default = tcp-mss-adjust). |
option |
- |
tcp-mss-adjust |
||||||||
|
|
|
|||||||||||
|
tun-mtu-uplink |
The maximum transmission unit (MTU) of uplink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). |
integer |
Minimum value: 576 Maximum value: 1500 |
0 |
||||||||
|
tun-mtu-downlink |
The MTU of downlink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). |
integer |
Minimum value: 576 Maximum value: 1500 |
0 |
||||||||
|
override-split-tunnel |
Enable/disable overriding the WTP profile split tunneling setting. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
split-tunneling-acl-path |
Split tunneling ACL path is local/tunnel. |
option |
- |
local |
||||||||
|
|
|
|||||||||||
|
split-tunneling-acl-local-ap-subnet |
Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL (default = disable). |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
override-lan |
Enable to override the WTP profile LAN port setting. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
override-allowaccess |
Enable to override the WTP profile management access configuration. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
allowaccess |
Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space. |
option |
- |
|
||||||||
|
|
|
|||||||||||
|
override-login-passwd-change |
Enable to override the WTP profile login-password (administrator password) setting. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
login-passwd-change |
Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no, default = no). |
option |
- |
no |
||||||||
|
|
|
|||||||||||
|
login-passwd |
Set the managed WTP, FortiAP, or AP's administrator password. |
password |
Not Specified |
|
||||||||
|
image-download |
Enable/disable WTP image download. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
mesh-bridge-enable |
Enable/disable mesh Ethernet bridge when WTP is configured as a mesh branch/leaf AP. |
option |
- |
default |
||||||||
|
|
|
|||||||||||
|
coordinate-latitude |
WTP latitude coordinate. |
string |
Maximum length: 19 |
|
||||||||
|
coordinate-longitude |
WTP longitude coordinate. |
string |
Maximum length: 19 |
|
||||||||
config split-tunneling-acl
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
dest-ip |
Destination IP and mask for the split-tunneling subnet. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
config lan
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port-mode |
LAN port mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port-ssid |
Bridge LAN port to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port1-mode |
LAN port 1 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port1-ssid |
Bridge LAN port 1 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port2-mode |
LAN port 2 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port2-ssid |
Bridge LAN port 2 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port3-mode |
LAN port 3 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port3-ssid |
Bridge LAN port 3 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port4-mode |
LAN port 4 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port4-ssid |
Bridge LAN port 4 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port5-mode |
LAN port 5 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port5-ssid |
Bridge LAN port 5 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port6-mode |
LAN port 6 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port6-ssid |
Bridge LAN port 6 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port7-mode |
LAN port 7 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port7-ssid |
Bridge LAN port 7 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port8-mode |
LAN port 8 mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port8-ssid |
Bridge LAN port 8 to SSID. |
string |
Maximum length: 15 |
|
||||||||||
|
port-esl-mode |
ESL port mode. |
option |
- |
offline |
||||||||||
|
|
|
|||||||||||||
|
port-esl-ssid |
Bridge ESL port to SSID. |
string |
Maximum length: 15 |
|
||||||||||
config radio-1
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 1 operates on. |
option |
- |
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-target |
The target of automatic transmit power adjustment in dBm. (-95 to -20, default = -70). |
string |
Maximum length: 7 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs). |
option |
- |
manual |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
drma-manual-mode |
Radio mode to be used for DRMA manual mode (default = ncf). |
option |
- |
ap |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
config radio-2
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 2 operates on. |
option |
- |
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-target |
The target of automatic transmit power adjustment in dBm. (-95 to -20, default = -70). |
string |
Maximum length: 7 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs). |
option |
- |
manual |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
drma-manual-mode |
Radio mode to be used for DRMA manual mode (default = ncf). |
option |
- |
ap |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
config radio-3
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 3 operates on. |
option |
- |
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-target |
The target of automatic transmit power adjustment in dBm. (-95 to -20, default = -70). |
string |
Maximum length: 7 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs). |
option |
- |
manual |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
drma-manual-mode |
Radio mode to be used for DRMA manual mode (default = ncf). |
option |
- |
ap |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
config radio-4
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 4 operates on. |
option |
- |
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-target |
The target of automatic transmit power adjustment in dBm. (-95 to -20, default = -70). |
string |
Maximum length: 7 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
0 |
||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs). |
option |
- |
manual |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
disable |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|
||||||||||||||||||||||||||||||||||||||||||||
|
drma-manual-mode |
Radio mode to be used for DRMA manual mode (default = ncf). |
option |
- |
ap |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||