config wanopt settings

This command is available for reference model(s) FortiGate 3000D, FortiGate 501E, FortiGate VM64, FortiWiFi 61F. It is not available for FortiGate 140E-POE.

Configure WAN optimization settings.

config wanopt settings

Description: Configure WAN optimization settings.

set host-id {string}

set tunnel-ssl-algorithm [high|medium|...]

set auto-detect-algorithm [simple|diff-req-resp]

end

config wanopt settings

Parameter	Description	Type	Size	Default
host-id	Local host ID (must also be entered in the remote FortiGate's peer list).	string	Maximum length: 35	default-id
tunnel-ssl-algorithm	Relative strength of encryption algorithms accepted during tunnel negotiation.	option	-	high
	Option Description high High encryption. Allow only AES and ChaCha. medium Medium encryption. Allow AES, ChaCha, 3DES, and RC4. low Low encryption. Allow AES, ChaCha, 3DES, RC4, and DES.
auto-detect-algorithm	Auto detection algorithms used in tunnel negotiations.	option	-	simple
	Option Description simple Use the same TCP option value in SYN/SYNACK packets. Backward compatible. diff-req-resp Use different TCP option values in SYN/SYNACK packets to avoid false positive detection.