Creating SD-WAN zones for the underlay

Create two SD-WAN zones named named WAN1 and WAN2 respectively for the underlay.

To create SD-WAN zones:

1. Go to Network > SD-WAN > SD-WAN Zones.
2. Create an SD-WAN zone named WAN1:
   1. Click Create New > SD-WAN Zone.

      

   2. Set Name to WAN1, and click OK.

3. Create an SD-WAN zone named WAN2:
   1. Click Create New > SD-WAN Zone.

   2. Set Name to WAN2, and click OK.

   The WAN1 and WAN2 zones are created.