IP range
The IP range type of address can describe a group of addresses while being specific and granular. It does this by specifying a continuous set of IP addresses between one specific IP address and another.
The format would be:
x.x.x.x-x.x.x.x, such as 192.168.110.100-192.168.110.120
To create an IP range address:
-
Go to Policy & Objects > Addresses.
-
Select Create New > Address.
-
In the Category field, select Address.
-
Enter a Name for the address object.
-
In the Type field, select IP Range from the dropdown menu.
-
In the IP Range field, enter the range of addresses in the following format: x.x.x.x-x.x.x.x (no spaces)
-
In the Interface field, leave as the default any or select a specific interface from the drop down menu.
-
Enter any additional information in the Comments field.
-
Click OK.