config system management-tunnel

Management tunnel configuration.

config system management-tunnel

Description: Management tunnel configuration.

set status [enable|disable]

set allow-config-restore [enable|disable]

set allow-push-configuration [enable|disable]

set allow-push-firmware [enable|disable]

set allow-collect-statistics [enable|disable]

set authorized-manager-only [enable|disable]

set serial-number {user}

end

config system management-tunnel

Parameter	Description	Type	Size	Default
status	Enable/disable FGFM tunnel.	option	-	enable
	Option Description enable Enable management tunnel. disable Disable management tunnel.
allow-config-restore	Enable/disable allow config restore.	option	-	enable
	Option Description enable Enable allow config restore. disable Disable allow config restore.
allow-push-configuration	Enable/disable push configuration.	option	-	enable
	Option Description enable Enable push configuration. disable Disable push configuration.
allow-push-firmware	Enable/disable push firmware.	option	-	enable
	Option Description enable Enable push firmware. disable Disable push firmware.
allow-collect-statistics	Enable/disable collection of run time statistics.	option	-	enable
	Option Description enable Enable collection of run time statistics. disable Disable collection of run time statistics.
authorized-manager-only	Enable/disable restriction of authorized manager only.	option	-	enable
	Option Description enable Enable restriction of authorized manager only. disable Disable restriction of authorized manager only.
serial-number	Serial number.	user	Not Specified