config system gre-tunnel
Configure GRE tunnel.
config system gre-tunnel Description: Configure GRE tunnel. edit <name> set auto-asic-offload [enable|disable] set checksum-reception [disable|enable] set checksum-transmission [disable|enable] set diffservcode {user} set dscp-copying [disable|enable] set interface {string} set ip-version [4|6] set keepalive-failtimes {integer} set keepalive-interval {integer} set key-inbound {integer} set key-outbound {integer} set local-gw {ipv4-address-any} set local-gw6 {ipv6-address} set name {string} set remote-gw {ipv4-address} set remote-gw6 {ipv6-address} set sequence-number-reception [disable|enable] set sequence-number-transmission [disable|enable] set use-sdwan [disable|enable] next end
config system gre-tunnel
Parameter |
Description |
Type |
Size |
Default |
||||||
---|---|---|---|---|---|---|---|---|---|---|
auto-asic-offload * |
Enable/disable automatic ASIC offloading. |
option |
- |
enable |
||||||
|
|
|||||||||
checksum-reception * |
Enable/disable validating checksums in received GRE packets. |
option |
- |
disable |
||||||
|
|
|||||||||
checksum-transmission * |
Enable/disable including checksums in transmitted GRE packets. |
option |
- |
disable |
||||||
|
|
|||||||||
diffservcode |
DiffServ setting to be applied to GRE tunnel outer IP header. |
user |
Not Specified |
|
||||||
dscp-copying |
Enable/disable DSCP copying. |
option |
- |
disable |
||||||
|
|
|||||||||
interface |
Interface name. |
string |
Not Specified |
|
||||||
ip-version |
IP version to use for VPN interface. |
option |
- |
4 |
||||||
|
|
|||||||||
keepalive-failtimes |
Number of consecutive unreturned keepalive messages before a GRE connection is considered down. |
integer |
Minimum value: 1 Maximum value: 255 |
10 |
||||||
keepalive-interval |
Keepalive message interval. |
integer |
Minimum value: 0 Maximum value: 32767 |
0 |
||||||
key-inbound * |
Require received GRE packets contain this key. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
key-outbound * |
Include this key in transmitted GRE packets. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
local-gw |
IP address of the local gateway. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||
local-gw6 |
IPv6 address of the local gateway. |
ipv6-address |
Not Specified |
:: |
||||||
name |
Tunnel name. |
string |
Not Specified |
|
||||||
remote-gw |
IP address of the remote gateway. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||
remote-gw6 |
IPv6 address of the remote gateway. |
ipv6-address |
Not Specified |
:: |
||||||
sequence-number-reception * |
Enable/disable validating sequence numbers in received GRE packets. |
option |
- |
disable |
||||||
|
|
|||||||||
sequence-number-transmission * |
Enable/disable including of sequence numbers in transmitted GRE packets. |
option |
- |
disable |
||||||
|
|
|||||||||
use-sdwan |
Enable/disable use of SD-WAN to reach remote gateway. |
option |
- |
disable |
||||||
|
|
* This parameter may not exist in some models.