config firewall shaper per-ip-shaper
Configure per-IP traffic shaper.
config firewall shaper per-ip-shaper
Description: Configure per-IP traffic shaper.
edit <name>
set max-bandwidth {integer}
set bandwidth-unit [kbps|mbps|...]
set max-concurrent-session {integer}
set max-concurrent-tcp-session {integer}
set max-concurrent-udp-session {integer}
set diffserv-forward [enable|disable]
set diffserv-reverse [enable|disable]
set diffservcode-forward {user}
set diffservcode-rev {user}
next
end
config firewall shaper per-ip-shaper
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
max-bandwidth |
Upper bandwidth limit enforced by this shaper . 0 means no limit. Units depend on the bandwidth-unit setting. |
integer |
Minimum value: 0 Maximum value: 80000000 |
0 |
||||||||
|
bandwidth-unit |
Unit of measurement for maximum bandwidth for this shaper (Kbps, Mbps or Gbps). |
option |
- |
kbps |
||||||||
|
|
|
|||||||||||
|
max-concurrent-session |
Maximum number of concurrent sessions allowed by this shaper . 0 means no limit. |
integer |
Minimum value: 0 Maximum value: 2097000 |
0 |
||||||||
|
max-concurrent-tcp-session |
Maximum number of concurrent TCP sessions allowed by this shaper . 0 means no limit. |
integer |
Minimum value: 0 Maximum value: 2097000 |
0 |
||||||||
|
max-concurrent-udp-session |
Maximum number of concurrent UDP sessions allowed by this shaper . 0 means no limit. |
integer |
Minimum value: 0 Maximum value: 2097000 |
0 |
||||||||
|
diffserv-forward |
Enable/disable changing the Forward (original) DiffServ setting applied to traffic accepted by this shaper. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
diffserv-reverse |
Enable/disable changing the Reverse (reply) DiffServ setting applied to traffic accepted by this shaper. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
diffservcode-forward |
Forward (original) DiffServ setting to be applied to traffic accepted by this shaper. |
user |
Not Specified |
|
||||||||
|
diffservcode-rev |
Reverse (reply) DiffServ setting to be applied to traffic accepted by this shaper. |
user |
Not Specified |
|
||||||||