config firewall central-snat-map
Configure IPv4 and IPv6 central SNAT policies.
config firewall central-snat-map
Description: Configure IPv4 and IPv6 central SNAT policies.
edit <policyid>
set uuid {uuid}
set status [enable|disable]
set type [ipv4|ipv6]
set srcintf <name1>, <name2>, ...
set dstintf <name1>, <name2>, ...
set orig-addr <name1>, <name2>, ...
set orig-addr6 <name1>, <name2>, ...
set dst-addr <name1>, <name2>, ...
set dst-addr6 <name1>, <name2>, ...
set protocol {integer}
set orig-port {user}
set nat [disable|enable]
set nat46 [enable|disable]
set nat64 [enable|disable]
set nat-ippool <name1>, <name2>, ...
set nat-ippool6 <name1>, <name2>, ...
set nat-port {user}
set comments {var-string}
next
end
config firewall central-snat-map
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
uuid |
Universally Unique Identifier (UUID; automatically assigned but can be manually reset). |
uuid |
Not Specified |
00000000-0000-0000-0000-000000000000 |
||||||
|
status |
Enable/disable the active status of this policy. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
type |
IPv4/IPv6 source NAT. |
option |
- |
ipv4 |
||||||
|
|
|
|||||||||
|
srcintf |
Source interface name from available interfaces. Interface name. |
string |
Maximum length: 79 |
|
||||||
|
dstintf |
Destination interface name from available interfaces. Interface name. |
string |
Maximum length: 79 |
|
||||||
|
orig-addr |
IPv4 Original address. Address name. |
string |
Maximum length: 79 |
|
||||||
|
orig-addr6 |
IPv6 Original address. Address name. |
string |
Maximum length: 79 |
|
||||||
|
dst-addr |
IPv4 Destination address. Address name. |
string |
Maximum length: 79 |
|
||||||
|
dst-addr6 |
IPv6 Destination address. Address name. |
string |
Maximum length: 79 |
|
||||||
|
protocol |
Integer value for the protocol type . |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
|
orig-port |
Original TCP port (1 to 65535, 0 means any port). |
user |
Not Specified |
|
||||||
|
nat |
Enable/disable source NAT. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
nat46 |
Enable/disable NAT46. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
nat64 |
Enable/disable NAT64. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
nat-ippool |
Name of the IP pools to be used to translate addresses from available IP Pools. IP pool name. |
string |
Maximum length: 79 |
|
||||||
|
nat-ippool6 |
IPv6 pools to be used for source NAT. IPv6 pool name. |
string |
Maximum length: 79 |
|
||||||
|
nat-port |
Translated port or port range (1 to 65535, 0 means any port). |
user |
Not Specified |
|
||||||
|
comments |
Comment. |
var-string |
Not Specified |
|
||||||