config system pppoe-interface

Configure the PPPoE interfaces.

config system pppoe-interface

Description: Configure the PPPoE interfaces.

edit <name>

set dial-on-demand [enable|disable]

set ipv6 [enable|disable]

set device {string}

set username {string}

set password {password}

set auth-type [auto|pap|...]

set ipunnumbered {ipv4-address}

set pppoe-unnumbered-negotiate [enable|disable]

set idle-timeout {integer}

set disc-retry-timeout {integer}

set padt-retry-timeout {integer}

set service-name {string}

set ac-name {string}

set lcp-echo-interval {integer}

set lcp-max-echo-fails {integer}

next

end

config system pppoe-interface

Parameter	Description	Type	Size	Default
dial-on-demand	Enable/disable dial on demand to dial the PPPoE interface when packets are routed to the PPPoE interface.	option	-	disable
	Option Description enable Enable dial on demand. disable Disable dial on demand.
ipv6	Enable/disable IPv6 Control Protocol (IPv6CP).	option	-	disable
	Option Description enable Enable IPv6CP. disable Disable IPv6CP.
device	Name for the physical interface.	string	Not Specified
username	User name.	string	Not Specified
password	Enter the password.	password	Not Specified
auth-type	PPP authentication type to use.	option	-	auto
	Option Description auto Automatically choose the authentication method. pap PAP authentication. chap CHAP authentication. mschapv1 MS-CHAPv1 authentication. mschapv2 MS-CHAPv2 authentication.
ipunnumbered	PPPoE unnumbered IP.	ipv4-address	Not Specified	0.0.0.0
pppoe-unnumbered-negotiate	Enable/disable PPPoE unnumbered negotiation.	option	-	enable
	Option Description enable Enable PPPoE unnumbered negotiation. disable Disable PPPoE unnumbered negotiation.
idle-timeout	PPPoE auto disconnect after idle timeout .	integer	Minimum value: 0 Maximum value: 4294967295	0
disc-retry-timeout	PPPoE discovery init timeout value in .	integer	Minimum value: 0 Maximum value: 4294967295	1
padt-retry-timeout	PPPoE terminate timeout value in .	integer	Minimum value: 0 Maximum value: 4294967295	1
service-name	PPPoE service name.	string	Not Specified
ac-name	PPPoE AC name.	string	Not Specified
lcp-echo-interval	Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.	integer	Minimum value: 0 Maximum value: 32767	5
lcp-max-echo-fails	Maximum missed LCP echo messages before disconnect.	integer	Minimum value: 0 Maximum value: 32767	3