config router bfd
Configure BFD.
config router bfd
Description: Configure BFD.
config multihop-template
Description: BFD multi-hop template table.
edit <id>
set src {ipv4-classnet}
set dst {ipv4-classnet}
set bfd-desired-min-tx {integer}
set bfd-required-min-rx {integer}
set bfd-detect-mult {integer}
set auth-mode [none|md5]
set md5-key {password}
next
end
config neighbor
Description: Neighbor.
edit <ip>
set interface {string}
next
end
end
config multihop-template
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
src |
Source prefix. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||
|
dst |
Destination prefix. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||
|
bfd-desired-min-tx |
BFD desired minimal transmit interval (milliseconds). |
integer |
Minimum value: 100 Maximum value: 30000 |
250 |
||||||
|
bfd-required-min-rx |
BFD required minimal receive interval (milliseconds). |
integer |
Minimum value: 100 Maximum value: 30000 |
250 |
||||||
|
bfd-detect-mult |
BFD detection multiplier. |
integer |
Minimum value: 3 Maximum value: 50 |
3 |
||||||
|
auth-mode |
Authentication mode. |
option |
- |
none |
||||||
|
|
|
|||||||||
|
md5-key |
MD5 key of key ID 1. |
password |
Not Specified |
|
||||||
config neighbor
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
ip |
IPv4 address of the BFD neighbor. |
ipv4-address |
Not Specified |
0.0.0.0 |
|
interface |
Interface name. |
string |
Maximum length: 15 |
|