config system modem
|
This command is available for model(s): FortiGate 1000D, FortiGate 1000F, FortiGate 1001F, FortiGate 100F, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 140E-POE, FortiGate 140E, FortiGate 1800F, FortiGate 1801F, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 201E, FortiGate 201F, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 2600F, FortiGate 2601F, FortiGate 3000D, FortiGate 3000F, FortiGate 3001F, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3200F, FortiGate 3201F, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F, FortiGate 3501F, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3700F, FortiGate 3701F, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 400F, FortiGate 401E, FortiGate 401F, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F, FortiGate 4400F, FortiGate 4401F, FortiGate 5001E1, FortiGate 5001E, FortiGate 500E, FortiGate 501E, FortiGate 600E, FortiGate 600F, FortiGate 601E, FortiGate 601F, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 70F, FortiGate 71F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGate 90E, FortiGate 91E, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiGateRugged 70F 3G4G, FortiGateRugged 70F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60E DSLJ, FortiWiFi 60E DSL, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. It is not available for: FortiGate VM64. |
Configure MODEM.
config system modem
Description: Configure MODEM.
set action [dial|stop|...]
set altmode [enable|disable]
set authtype1 {option1}, {option2}, ...
set authtype2 {option1}, {option2}, ...
set authtype3 {option1}, {option2}, ...
set auto-dial [enable|disable]
set connect-timeout {integer}
set dial-cmd1 {string}
set dial-cmd2 {string}
set dial-cmd3 {string}
set dial-on-demand [enable|disable]
set distance {integer}
set dont-send-CR1 [enable|disable]
set dont-send-CR2 [enable|disable]
set dont-send-CR3 [enable|disable]
set extra-init1 {string}
set extra-init2 {string}
set extra-init3 {string}
set holddown-timer {integer}
set idle-timer {integer}
set interface {string}
set lockdown-lac {string}
set mode [standalone|redundant]
set network-init {string}
set passwd1 {password}
set passwd2 {password}
set passwd3 {password}
set peer-modem1 [generic|actiontec|...]
set peer-modem2 [generic|actiontec|...]
set peer-modem3 [generic|actiontec|...]
set phone1 {string}
set phone2 {string}
set phone3 {string}
set pin-init {string}
set ppp-echo-request1 [enable|disable]
set ppp-echo-request2 [enable|disable]
set ppp-echo-request3 [enable|disable]
set priority {integer}
set redial [none|1|...]
set reset {integer}
set status [enable|disable]
set traffic-check [enable|disable]
set username1 {string}
set username2 {string}
set username3 {string}
set wireless-port {integer}
end
config system modem
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
action |
Dial up/stop MODEM. |
option |
- |
stop |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
altmode |
Enable/disable altmode for installations using PPP in China. |
option |
- |
enable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype1 |
Allowed authentication types for ISP 1. |
option |
- |
pap chap mschap mschapv2 |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype2 |
Allowed authentication types for ISP 2. |
option |
- |
pap chap mschap mschapv2 |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
authtype3 |
Allowed authentication types for ISP 3. |
option |
- |
pap chap mschap mschapv2 |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
auto-dial |
Enable/disable auto-dial after a reboot or disconnection. |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
connect-timeout |
Connection completion timeout. |
integer |
Minimum value: 30 Maximum value: 255 |
90 |
||||||||||||||||||||||||
|
dial-cmd1 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
dial-cmd2 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
dial-cmd3 |
Dial command (this is often an ATD or ATDT command). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
dial-on-demand |
Enable/disable to dial the modem when packets are routed to the modem interface. |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
distance |
Distance of learned routes. |
integer |
Minimum value: 1 Maximum value: 255 |
1 |
||||||||||||||||||||||||
|
dont-send-CR1 |
Do not send CR when connected (ISP1). |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
dont-send-CR2 |
Do not send CR when connected (ISP2). |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
dont-send-CR3 |
Do not send CR when connected (ISP3). |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
extra-init1 |
Extra initialization string to ISP 1. |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
extra-init2 |
Extra initialization string to ISP 2. |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
extra-init3 |
Extra initialization string to ISP 3. |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
holddown-timer |
Hold down timer in seconds. |
integer |
Minimum value: 1 Maximum value: 60 |
60 |
||||||||||||||||||||||||
|
idle-timer |
MODEM connection idle time. |
integer |
Minimum value: 1 Maximum value: 9999 |
5 |
||||||||||||||||||||||||
|
interface |
Name of redundant interface. |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
lockdown-lac |
Allow connection only to the specified Location Area Code (LAC). |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
mode |
Set MODEM operation mode to redundant or standalone. |
option |
- |
standalone |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
network-init |
AT command to set the Network name/type (AT+COPS=<mode>,[<format>,<oper>[,<AcT>]]). |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
passwd1 |
Password to access the specified dialup account. |
password |
Not Specified |
|
||||||||||||||||||||||||
|
passwd2 |
Password to access the specified dialup account. |
password |
Not Specified |
|
||||||||||||||||||||||||
|
passwd3 |
Password to access the specified dialup account. |
password |
Not Specified |
|
||||||||||||||||||||||||
|
peer-modem1 |
Specify peer MODEM type for phone1. |
option |
- |
generic |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
peer-modem2 |
Specify peer MODEM type for phone2. |
option |
- |
generic |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
peer-modem3 |
Specify peer MODEM type for phone3. |
option |
- |
generic |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
phone1 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
phone2 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
phone3 |
Phone number to connect to the dialup account (must not contain spaces, and should include standard special characters). |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
pin-init |
AT command to set the PIN (AT+PIN=<pin>). |
string |
Maximum length: 127 |
|
||||||||||||||||||||||||
|
ppp-echo-request1 |
Enable/disable PPP echo-request to ISP 1. |
option |
- |
enable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
ppp-echo-request2 |
Enable/disable PPP echo-request to ISP 2. |
option |
- |
enable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
ppp-echo-request3 |
Enable/disable PPP echo-request to ISP 3. |
option |
- |
enable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
priority |
Priority of learned routes. |
integer |
Minimum value: 1 Maximum value: 65535 |
1 |
||||||||||||||||||||||||
|
redial |
Redial limit. |
option |
- |
none |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
reset |
Number of dial attempts before resetting modem (0 = never reset). |
integer |
Minimum value: 0 Maximum value: 10 |
0 |
||||||||||||||||||||||||
|
status |
Enable/disable Modem support (equivalent to bringing an interface up or down). |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
traffic-check |
Enable/disable traffic-check. |
option |
- |
disable |
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
username1 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
username2 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
username3 |
User name to access the specified dialup account. |
string |
Maximum length: 63 |
|
||||||||||||||||||||||||
|
wireless-port |
Enter wireless port number: 0 for default, 1 for first port, and so on. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||||||||||||||