config router bgp
Configure BGP.
config router bgp
Description: Configure BGP.
set additional-path [enable|disable]
set additional-path-select {integer}
set additional-path-select-vpnv4 {integer}
set additional-path-select-vpnv6 {integer}
set additional-path-select6 {integer}
set additional-path-vpnv4 [enable|disable]
set additional-path-vpnv6 [enable|disable]
set additional-path6 [enable|disable]
config admin-distance
Description: Administrative distance modifications.
edit <id>
set distance {integer}
set neighbour-prefix {ipv4-classnet}
set route-list {string}
next
end
config aggregate-address
Description: BGP aggregate address table.
edit <id>
set as-set [enable|disable]
set prefix {ipv4-classnet-any}
set summary-only [enable|disable]
next
end
config aggregate-address6
Description: BGP IPv6 aggregate address table.
edit <id>
set as-set [enable|disable]
set prefix6 {ipv6-prefix}
set summary-only [enable|disable]
next
end
set always-compare-med [enable|disable]
set as {user}
set bestpath-as-path-ignore [enable|disable]
set bestpath-cmp-confed-aspath [enable|disable]
set bestpath-cmp-routerid [enable|disable]
set bestpath-med-confed [enable|disable]
set bestpath-med-missing-as-worst [enable|disable]
set client-to-client-reflection [enable|disable]
set cluster-id {ipv4-address-any}
set confederation-identifier {integer}
set confederation-peers <peer1>, <peer2>, ...
set cross-family-conditional-adv [enable|disable]
set dampening [enable|disable]
set dampening-max-suppress-time {integer}
set dampening-reachability-half-life {integer}
set dampening-reuse {integer}
set dampening-route-map {string}
set dampening-suppress {integer}
set dampening-unreachability-half-life {integer}
set default-local-preference {integer}
set deterministic-med [enable|disable]
set distance-external {integer}
set distance-internal {integer}
set distance-local {integer}
set ebgp-multipath [enable|disable]
set enforce-first-as [enable|disable]
set fast-external-failover [enable|disable]
set graceful-end-on-timer [enable|disable]
set graceful-restart [enable|disable]
set graceful-restart-time {integer}
set graceful-stalepath-time {integer}
set graceful-update-delay {integer}
set holdtime-timer {integer}
set ibgp-multipath [enable|disable]
set ignore-optional-capability [enable|disable]
set keepalive-timer {integer}
set log-neighbour-changes [enable|disable]
set multipath-recursive-distance [enable|disable]
config neighbor
Description: BGP neighbor table.
edit <ip>
set activate [enable|disable]
set activate-evpn [enable|disable]
set activate-vpnv4 [enable|disable]
set activate-vpnv6 [enable|disable]
set activate6 [enable|disable]
set additional-path [send|receive|...]
set additional-path-vpnv4 [send|receive|...]
set additional-path-vpnv6 [send|receive|...]
set additional-path6 [send|receive|...]
set adv-additional-path {integer}
set adv-additional-path-vpnv4 {integer}
set adv-additional-path-vpnv6 {integer}
set adv-additional-path6 {integer}
set advertisement-interval {integer}
set allowas-in {integer}
set allowas-in-enable [enable|disable]
set allowas-in-enable-evpn [enable|disable]
set allowas-in-enable-vpnv4 [enable|disable]
set allowas-in-enable-vpnv6 [enable|disable]
set allowas-in-enable6 [enable|disable]
set allowas-in-evpn {integer}
set allowas-in-vpnv4 {integer}
set allowas-in-vpnv6 {integer}
set allowas-in6 {integer}
set as-override [enable|disable]
set as-override6 [enable|disable]
set attribute-unchanged {option1}, {option2}, ...
set attribute-unchanged-vpnv4 {option1}, {option2}, ...
set attribute-unchanged-vpnv6 {option1}, {option2}, ...
set attribute-unchanged6 {option1}, {option2}, ...
set auth-options {string}
set bfd [enable|disable]
set capability-default-originate [enable|disable]
set capability-default-originate6 [enable|disable]
set capability-dynamic [enable|disable]
set capability-graceful-restart [enable|disable]
set capability-graceful-restart-evpn [enable|disable]
set capability-graceful-restart-vpnv4 [enable|disable]
set capability-graceful-restart-vpnv6 [enable|disable]
set capability-graceful-restart6 [enable|disable]
set capability-orf [none|receive|...]
set capability-orf6 [none|receive|...]
set capability-route-refresh [enable|disable]
config conditional-advertise
Description: Conditional advertisement.
edit <advertise-routemap>
set condition-routemap <name1>, <name2>, ...
set condition-type [exist|non-exist]
next
end
config conditional-advertise6
Description: IPv6 conditional advertisement.
edit <advertise-routemap>
set condition-routemap <name1>, <name2>, ...
set condition-type [exist|non-exist]
next
end
set connect-timer {integer}
set default-originate-routemap {string}
set default-originate-routemap6 {string}
set description {string}
set distribute-list-in {string}
set distribute-list-in-vpnv4 {string}
set distribute-list-in-vpnv6 {string}
set distribute-list-in6 {string}
set distribute-list-out {string}
set distribute-list-out-vpnv4 {string}
set distribute-list-out-vpnv6 {string}
set distribute-list-out6 {string}
set dont-capability-negotiate [enable|disable]
set ebgp-enforce-multihop [enable|disable]
set ebgp-multihop-ttl {integer}
set filter-list-in {string}
set filter-list-in-vpnv4 {string}
set filter-list-in-vpnv6 {string}
set filter-list-in6 {string}
set filter-list-out {string}
set filter-list-out-vpnv4 {string}
set filter-list-out-vpnv6 {string}
set filter-list-out6 {string}
set holdtime-timer {integer}
set interface {string}
set keep-alive-timer {integer}
set link-down-failover [enable|disable]
set local-as {user}
set local-as-no-prepend [enable|disable]
set local-as-replace-as [enable|disable]
set maximum-prefix {integer}
set maximum-prefix-evpn {integer}
set maximum-prefix-threshold {integer}
set maximum-prefix-threshold-evpn {integer}
set maximum-prefix-threshold-vpnv4 {integer}
set maximum-prefix-threshold-vpnv6 {integer}
set maximum-prefix-threshold6 {integer}
set maximum-prefix-vpnv4 {integer}
set maximum-prefix-vpnv6 {integer}
set maximum-prefix-warning-only [enable|disable]
set maximum-prefix-warning-only-evpn [enable|disable]
set maximum-prefix-warning-only-vpnv4 [enable|disable]
set maximum-prefix-warning-only-vpnv6 [enable|disable]
set maximum-prefix-warning-only6 [enable|disable]
set maximum-prefix6 {integer}
set next-hop-self [enable|disable]
set next-hop-self-rr [enable|disable]
set next-hop-self-rr6 [enable|disable]
set next-hop-self-vpnv4 [enable|disable]
set next-hop-self-vpnv6 [enable|disable]
set next-hop-self6 [enable|disable]
set override-capability [enable|disable]
set passive [enable|disable]
set password {password}
set prefix-list-in {string}
set prefix-list-in-vpnv4 {string}
set prefix-list-in-vpnv6 {string}
set prefix-list-in6 {string}
set prefix-list-out {string}
set prefix-list-out-vpnv4 {string}
set prefix-list-out-vpnv6 {string}
set prefix-list-out6 {string}
set remote-as {user}
set remove-private-as [enable|disable]
set remove-private-as-evpn [enable|disable]
set remove-private-as-vpnv4 [enable|disable]
set remove-private-as-vpnv6 [enable|disable]
set remove-private-as6 [enable|disable]
set restart-time {integer}
set retain-stale-time {integer}
set route-map-in {string}
set route-map-in-evpn {string}
set route-map-in-vpnv4 {string}
set route-map-in-vpnv6 {string}
set route-map-in6 {string}
set route-map-out {string}
set route-map-out-evpn {string}
set route-map-out-preferable {string}
set route-map-out-vpnv4 {string}
set route-map-out-vpnv4-preferable {string}
set route-map-out-vpnv6 {string}
set route-map-out-vpnv6-preferable {string}
set route-map-out6 {string}
set route-map-out6-preferable {string}
set route-reflector-client [enable|disable]
set route-reflector-client-evpn [enable|disable]
set route-reflector-client-vpnv4 [enable|disable]
set route-reflector-client-vpnv6 [enable|disable]
set route-reflector-client6 [enable|disable]
set route-server-client [enable|disable]
set route-server-client-evpn [enable|disable]
set route-server-client-vpnv4 [enable|disable]
set route-server-client-vpnv6 [enable|disable]
set route-server-client6 [enable|disable]
set send-community [standard|extended|...]
set send-community-evpn [standard|extended|...]
set send-community-vpnv4 [standard|extended|...]
set send-community-vpnv6 [standard|extended|...]
set send-community6 [standard|extended|...]
set shutdown [enable|disable]
set soft-reconfiguration [enable|disable]
set soft-reconfiguration-evpn [enable|disable]
set soft-reconfiguration-vpnv4 [enable|disable]
set soft-reconfiguration-vpnv6 [enable|disable]
set soft-reconfiguration6 [enable|disable]
set stale-route [enable|disable]
set strict-capability-match [enable|disable]
set unsuppress-map {string}
set unsuppress-map6 {string}
set update-source {string}
set weight {integer}
next
end
config neighbor-group
Description: BGP neighbor group table.
edit <name>
set activate [enable|disable]
set activate-evpn [enable|disable]
set activate-vpnv4 [enable|disable]
set activate-vpnv6 [enable|disable]
set activate6 [enable|disable]
set additional-path [send|receive|...]
set additional-path-vpnv4 [send|receive|...]
set additional-path-vpnv6 [send|receive|...]
set additional-path6 [send|receive|...]
set adv-additional-path {integer}
set adv-additional-path-vpnv4 {integer}
set adv-additional-path-vpnv6 {integer}
set adv-additional-path6 {integer}
set advertisement-interval {integer}
set allowas-in {integer}
set allowas-in-enable [enable|disable]
set allowas-in-enable-evpn [enable|disable]
set allowas-in-enable-vpnv4 [enable|disable]
set allowas-in-enable-vpnv6 [enable|disable]
set allowas-in-enable6 [enable|disable]
set allowas-in-evpn {integer}
set allowas-in-vpnv4 {integer}
set allowas-in-vpnv6 {integer}
set allowas-in6 {integer}
set as-override [enable|disable]
set as-override6 [enable|disable]
set attribute-unchanged {option1}, {option2}, ...
set attribute-unchanged-vpnv4 {option1}, {option2}, ...
set attribute-unchanged-vpnv6 {option1}, {option2}, ...
set attribute-unchanged6 {option1}, {option2}, ...
set auth-options {string}
set bfd [enable|disable]
set capability-default-originate [enable|disable]
set capability-default-originate6 [enable|disable]
set capability-dynamic [enable|disable]
set capability-graceful-restart [enable|disable]
set capability-graceful-restart-evpn [enable|disable]
set capability-graceful-restart-vpnv4 [enable|disable]
set capability-graceful-restart-vpnv6 [enable|disable]
set capability-graceful-restart6 [enable|disable]
set capability-orf [none|receive|...]
set capability-orf6 [none|receive|...]
set capability-route-refresh [enable|disable]
set connect-timer {integer}
set default-originate-routemap {string}
set default-originate-routemap6 {string}
set description {string}
set distribute-list-in {string}
set distribute-list-in-vpnv4 {string}
set distribute-list-in-vpnv6 {string}
set distribute-list-in6 {string}
set distribute-list-out {string}
set distribute-list-out-vpnv4 {string}
set distribute-list-out-vpnv6 {string}
set distribute-list-out6 {string}
set dont-capability-negotiate [enable|disable]
set ebgp-enforce-multihop [enable|disable]
set ebgp-multihop-ttl {integer}
set filter-list-in {string}
set filter-list-in-vpnv4 {string}
set filter-list-in-vpnv6 {string}
set filter-list-in6 {string}
set filter-list-out {string}
set filter-list-out-vpnv4 {string}
set filter-list-out-vpnv6 {string}
set filter-list-out6 {string}
set holdtime-timer {integer}
set interface {string}
set keep-alive-timer {integer}
set link-down-failover [enable|disable]
set local-as {user}
set local-as-no-prepend [enable|disable]
set local-as-replace-as [enable|disable]
set maximum-prefix {integer}
set maximum-prefix-evpn {integer}
set maximum-prefix-threshold {integer}
set maximum-prefix-threshold-evpn {integer}
set maximum-prefix-threshold-vpnv4 {integer}
set maximum-prefix-threshold-vpnv6 {integer}
set maximum-prefix-threshold6 {integer}
set maximum-prefix-vpnv4 {integer}
set maximum-prefix-vpnv6 {integer}
set maximum-prefix-warning-only [enable|disable]
set maximum-prefix-warning-only-evpn [enable|disable]
set maximum-prefix-warning-only-vpnv4 [enable|disable]
set maximum-prefix-warning-only-vpnv6 [enable|disable]
set maximum-prefix-warning-only6 [enable|disable]
set maximum-prefix6 {integer}
set next-hop-self [enable|disable]
set next-hop-self-rr [enable|disable]
set next-hop-self-rr6 [enable|disable]
set next-hop-self-vpnv4 [enable|disable]
set next-hop-self-vpnv6 [enable|disable]
set next-hop-self6 [enable|disable]
set override-capability [enable|disable]
set passive [enable|disable]
set password {password}
set prefix-list-in {string}
set prefix-list-in-vpnv4 {string}
set prefix-list-in-vpnv6 {string}
set prefix-list-in6 {string}
set prefix-list-out {string}
set prefix-list-out-vpnv4 {string}
set prefix-list-out-vpnv6 {string}
set prefix-list-out6 {string}
set remote-as {user}
set remote-as-filter {string}
set remove-private-as [enable|disable]
set remove-private-as-evpn [enable|disable]
set remove-private-as-vpnv4 [enable|disable]
set remove-private-as-vpnv6 [enable|disable]
set remove-private-as6 [enable|disable]
set restart-time {integer}
set retain-stale-time {integer}
set route-map-in {string}
set route-map-in-evpn {string}
set route-map-in-vpnv4 {string}
set route-map-in-vpnv6 {string}
set route-map-in6 {string}
set route-map-out {string}
set route-map-out-evpn {string}
set route-map-out-preferable {string}
set route-map-out-vpnv4 {string}
set route-map-out-vpnv4-preferable {string}
set route-map-out-vpnv6 {string}
set route-map-out-vpnv6-preferable {string}
set route-map-out6 {string}
set route-map-out6-preferable {string}
set route-reflector-client [enable|disable]
set route-reflector-client-evpn [enable|disable]
set route-reflector-client-vpnv4 [enable|disable]
set route-reflector-client-vpnv6 [enable|disable]
set route-reflector-client6 [enable|disable]
set route-server-client [enable|disable]
set route-server-client-evpn [enable|disable]
set route-server-client-vpnv4 [enable|disable]
set route-server-client-vpnv6 [enable|disable]
set route-server-client6 [enable|disable]
set send-community [standard|extended|...]
set send-community-evpn [standard|extended|...]
set send-community-vpnv4 [standard|extended|...]
set send-community-vpnv6 [standard|extended|...]
set send-community6 [standard|extended|...]
set shutdown [enable|disable]
set soft-reconfiguration [enable|disable]
set soft-reconfiguration-evpn [enable|disable]
set soft-reconfiguration-vpnv4 [enable|disable]
set soft-reconfiguration-vpnv6 [enable|disable]
set soft-reconfiguration6 [enable|disable]
set stale-route [enable|disable]
set strict-capability-match [enable|disable]
set unsuppress-map {string}
set unsuppress-map6 {string}
set update-source {string}
set weight {integer}
next
end
config neighbor-range
Description: BGP neighbor range table.
edit <id>
set max-neighbor-num {integer}
set neighbor-group {string}
set prefix {ipv4-classnet}
next
end
config neighbor-range6
Description: BGP IPv6 neighbor range table.
edit <id>
set max-neighbor-num {integer}
set neighbor-group {string}
set prefix6 {ipv6-network}
next
end
config network
Description: BGP network table.
edit <id>
set backdoor [enable|disable]
set network-import-check [global|enable|...]
set prefix {ipv4-classnet}
set route-map {string}
next
end
set network-import-check [enable|disable]
config network6
Description: BGP IPv6 network table.
edit <id>
set backdoor [enable|disable]
set network-import-check [global|enable|...]
set prefix6 {ipv6-network}
set route-map {string}
next
end
set recursive-inherit-priority [enable|disable]
set recursive-next-hop [enable|disable]
config redistribute
Description: BGP IPv4 redistribute table. Read-only.
edit <name>
set route-map {string}
set status [enable|disable]
next
end
config redistribute6
Description: BGP IPv6 redistribute table. Read-only.
edit <name>
set route-map {string}
set status [enable|disable]
next
end
set router-id {ipv4-address-any}
set scan-time {integer}
set synchronization [enable|disable]
set tag-resolve-mode [disable|preferred|...]
config vrf
Description: BGP VRF leaking table.
edit <vrf>
set export-rt <route-target1>, <route-target2>, ...
set import-route-map {string}
set import-rt <route-target1>, <route-target2>, ...
config leak-target
Description: Target VRF table.
edit <vrf>
set interface {string}
set route-map {string}
next
end
set rd {string}
set role [standalone|ce|...]
next
end
config vrf6
Description: BGP IPv6 VRF leaking table.
edit <vrf>
set export-rt <route-target1>, <route-target2>, ...
set import-route-map {string}
set import-rt <route-target1>, <route-target2>, ...
config leak-target
Description: Target VRF table.
edit <vrf>
set interface {string}
set route-map {string}
next
end
set rd {string}
set role [standalone|ce|...]
next
end
end
config router bgp
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
additional-path |
Enable/disable selection of BGP IPv4 additional paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
additional-path-select |
Number of additional paths to be selected for each IPv4 NLRI. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||
|
additional-path-select-vpnv4 |
Number of additional paths to be selected for each VPNv4 NLRI. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||
|
additional-path-select-vpnv6 |
Number of additional paths to be selected for each VPNv6 NLRI. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||
|
additional-path-select6 |
Number of additional paths to be selected for each IPv6 NLRI. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||
|
additional-path-vpnv4 |
Enable/disable selection of BGP VPNv4 additional paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
additional-path-vpnv6 |
Enable/disable selection of BGP VPNv6 additional paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
additional-path6 |
Enable/disable selection of BGP IPv6 additional paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
always-compare-med |
Enable/disable always compare MED. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
as |
Router AS number, asplain/asdot/asdot+ format, 0 to disable BGP. |
user |
Not Specified |
|
||||||||
|
bestpath-as-path-ignore |
Enable/disable ignore AS path. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
bestpath-cmp-confed-aspath |
Enable/disable compare federation AS path length. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
bestpath-cmp-routerid |
Enable/disable compare router ID for identical EBGP paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
bestpath-med-confed |
Enable/disable compare MED among confederation paths. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
bestpath-med-missing-as-worst |
Enable/disable treat missing MED as least preferred. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
client-to-client-reflection |
Enable/disable client-to-client route reflection. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
cluster-id |
Route reflector cluster ID. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||
|
confederation-identifier |
Confederation identifier. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||
|
confederation-peers |
Confederation peers. Peer ID. |
string |
Maximum length: 79 |
|
||||||||
|
cross-family-conditional-adv |
Enable/disable cross address family conditional advertisement. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
dampening |
Enable/disable route-flap dampening. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
dampening-max-suppress-time |
Maximum minutes a route can be suppressed. |
integer |
Minimum value: 1 Maximum value: 255 |
60 |
||||||||
|
dampening-reachability-half-life |
Reachability half-life time for penalty (min). |
integer |
Minimum value: 1 Maximum value: 45 |
15 |
||||||||
|
dampening-reuse |
Threshold to reuse routes. |
integer |
Minimum value: 1 Maximum value: 20000 |
750 |
||||||||
|
dampening-route-map |
Criteria for dampening. |
string |
Maximum length: 35 |
|
||||||||
|
dampening-suppress |
Threshold to suppress routes. |
integer |
Minimum value: 1 Maximum value: 20000 |
2000 |
||||||||
|
dampening-unreachability-half-life |
Unreachability half-life time for penalty (min). |
integer |
Minimum value: 1 Maximum value: 45 |
15 |
||||||||
|
default-local-preference |
Default local preference. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
100 |
||||||||
|
deterministic-med |
Enable/disable enforce deterministic comparison of MED. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
distance-external |
Distance for routes external to the AS. |
integer |
Minimum value: 1 Maximum value: 255 |
20 |
||||||||
|
distance-internal |
Distance for routes internal to the AS. |
integer |
Minimum value: 1 Maximum value: 255 |
200 |
||||||||
|
distance-local |
Distance for routes local to the AS. |
integer |
Minimum value: 1 Maximum value: 255 |
200 |
||||||||
|
ebgp-multipath |
Enable/disable EBGP multi-path. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
enforce-first-as |
Enable/disable enforce first AS for EBGP routes. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
fast-external-failover |
Enable/disable reset peer BGP session if link goes down. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
graceful-end-on-timer |
Enable/disable to exit graceful restart on timer only. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
graceful-restart |
Enable/disable BGP graceful restart capabilities. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
graceful-restart-time |
Time needed for neighbors to restart (sec). |
integer |
Minimum value: 1 Maximum value: 3600 |
120 |
||||||||
|
graceful-stalepath-time |
Time to hold stale paths of restarting neighbor (sec). |
integer |
Minimum value: 1 Maximum value: 3600 |
360 |
||||||||
|
graceful-update-delay |
Route advertisement/selection delay after restart (sec). |
integer |
Minimum value: 1 Maximum value: 3600 |
120 |
||||||||
|
holdtime-timer |
Number of seconds to mark peer as dead. |
integer |
Minimum value: 3 Maximum value: 65535 |
180 |
||||||||
|
ibgp-multipath |
Enable/disable IBGP multi-path. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
ignore-optional-capability |
Do not send unknown optional capability notification message. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
keepalive-timer |
Frequency to send keep alive requests. |
integer |
Minimum value: 0 Maximum value: 65535 |
60 |
||||||||
|
log-neighbour-changes |
Log BGP neighbor changes. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
multipath-recursive-distance |
Enable/disable use of recursive distance to select multipath. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
network-import-check |
Enable/disable ensure BGP network route exists in IGP. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
recursive-inherit-priority |
Enable/disable priority inheritance for recursive resolution. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
recursive-next-hop |
Enable/disable recursive resolution of next-hop using BGP route. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
router-id |
Router ID. |
ipv4-address-any |
Not Specified |
|
||||||||
|
scan-time |
Background scanner interval (sec), 0 to disable it. |
integer |
Minimum value: 5 Maximum value: 60 |
60 |
||||||||
|
synchronization |
Enable/disable only advertise routes from iBGP if routes present in an IGP. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
tag-resolve-mode |
Configure tag-match mode. Resolves BGP routes with other routes containing the same tag. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
config admin-distance
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
distance |
Administrative distance to apply. |
integer |
Minimum value: 1 Maximum value: 255 |
0 |
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
neighbour-prefix |
Neighbor address prefix. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
|
route-list |
Access list of routes to apply new distance to. |
string |
Maximum length: 35 |
|
config aggregate-address
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
as-set |
Enable/disable generate AS set path information. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
prefix |
Aggregate prefix. |
ipv4-classnet-any |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||
|
summary-only |
Enable/disable filter more specific routes from updates. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config aggregate-address6
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
as-set |
Enable/disable generate AS set path information. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
prefix6 |
Aggregate IPv6 prefix. |
ipv6-prefix |
Not Specified |
::/0 |
||||||
|
summary-only |
Enable/disable filter more specific routes from updates. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config neighbor
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
activate |
Enable/disable address family IPv4 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-evpn |
Enable/disable address family L2VPN EVPN for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-vpnv4 |
Enable/disable address family VPNv4 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-vpnv6 |
Enable/disable address family VPNv6 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate6 |
Enable/disable address family IPv6 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
additional-path |
Enable/disable IPv4 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path-vpnv4 |
Enable/disable VPNv4 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path-vpnv6 |
Enable/disable VPNv6 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path6 |
Enable/disable IPv6 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
adv-additional-path |
Number of IPv4 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path-vpnv4 |
Number of VPNv4 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path-vpnv6 |
Number of VPNv6 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path6 |
Number of IPv6 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
advertisement-interval |
Minimum interval (sec) between sending updates. |
integer |
Minimum value: 0 Maximum value: 600 |
30 |
||||||||||
|
allowas-in |
IPv4 The maximum number of occurrence of my AS number allowed. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-enable |
Enable/disable IPv4 Enable to allow my AS in AS path. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-evpn |
Enable/disable to allow my AS in AS path for L2VPN EVPN route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-vpnv4 |
Enable/disable to allow my AS in AS path for VPNv4 route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-vpnv6 |
Enable/disable use of my AS in AS path for VPNv6 route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable6 |
Enable/disable IPv6 Enable to allow my AS in AS path. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-evpn |
The maximum number of occurrence of my AS number allowed for L2VPN EVPN route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-vpnv4 |
The maximum number of occurrence of my AS number allowed for VPNv4 route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-vpnv6 |
The maximum number of occurrence of my AS number allowed for VPNv6 route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in6 |
IPv6 The maximum number of occurrence of my AS number allowed. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
as-override |
Enable/disable replace peer AS with own AS for IPv4. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
as-override6 |
Enable/disable replace peer AS with own AS for IPv6. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged |
IPv4 List of attributes that should be unchanged. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged-vpnv4 |
List of attributes that should be unchanged for VPNv4 route. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged-vpnv6 |
List of attributes that should not be changed for VPNv6 route. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged6 |
IPv6 List of attributes that should be unchanged. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
auth-options |
Key-chain name for TCP authentication options. |
string |
Maximum length: 35 |
|
||||||||||
|
bfd |
Enable/disable BFD for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-default-originate |
Enable/disable advertise default IPv4 route to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-default-originate6 |
Enable/disable advertise default IPv6 route to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-dynamic |
Enable/disable advertise dynamic capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart |
Enable/disable advertise IPv4 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-evpn |
Enable/disable advertisement of L2VPN EVPN graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-vpnv4 |
Enable/disable advertise VPNv4 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-vpnv6 |
Enable/disable advertisement of VPNv6 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart6 |
Enable/disable advertise IPv6 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-orf |
Accept/Send IPv4 ORF lists to/from this neighbor. |
option |
- |
none |
||||||||||
|
|
|
|||||||||||||
|
capability-orf6 |
Accept/Send IPv6 ORF lists to/from this neighbor. |
option |
- |
none |
||||||||||
|
|
|
|||||||||||||
|
capability-route-refresh |
Enable/disable advertise route refresh capability to this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
connect-timer |
Interval (sec) for connect timer. |
integer |
Minimum value: 1 Maximum value: 65535 |
4294967295 |
||||||||||
|
default-originate-routemap |
Route map to specify criteria to originate IPv4 default. |
string |
Maximum length: 35 |
|
||||||||||
|
default-originate-routemap6 |
Route map to specify criteria to originate IPv6 default. |
string |
Maximum length: 35 |
|
||||||||||
|
description |
Description. |
string |
Maximum length: 63 |
|
||||||||||
|
distribute-list-in |
Filter for IPv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in-vpnv4 |
Filter for VPNv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in-vpnv6 |
Filter for VPNv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in6 |
Filter for IPv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out |
Filter for IPv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out-vpnv4 |
Filter for VPNv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out-vpnv6 |
Filter for VPNv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out6 |
Filter for IPv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
dont-capability-negotiate |
Do not negotiate capabilities with this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
ebgp-enforce-multihop |
Enable/disable allow multi-hop EBGP neighbors. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
ebgp-multihop-ttl |
EBGP multihop TTL for this peer. |
integer |
Minimum value: 1 Maximum value: 255 |
255 |
||||||||||
|
filter-list-in |
BGP filter for IPv4 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in-vpnv4 |
BGP filter for VPNv4 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in-vpnv6 |
BGP filter for VPNv6 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in6 |
BGP filter for IPv6 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out |
BGP filter for IPv4 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out-vpnv4 |
BGP filter for VPNv4 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out-vpnv6 |
BGP filter for VPNv6 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out6 |
BGP filter for IPv6 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
holdtime-timer |
Interval (sec) before peer considered dead. |
integer |
Minimum value: 3 Maximum value: 65535 |
4294967295 |
||||||||||
|
interface |
Specify outgoing interface for peer connection. For IPv6 peer, the interface should have link-local address. |
string |
Maximum length: 15 |
|
||||||||||
|
ip |
IP/IPv6 address of neighbor. |
string |
Maximum length: 45 |
|
||||||||||
|
keep-alive-timer |
Keep alive timer interval (sec). |
integer |
Minimum value: 0 Maximum value: 65535 |
4294967295 |
||||||||||
|
link-down-failover |
Enable/disable failover upon link down. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
local-as |
Local AS number of neighbor. |
user |
Not Specified |
|
||||||||||
|
local-as-no-prepend |
Do not prepend local-as to incoming updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
local-as-replace-as |
Replace real AS with local-as in outgoing updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix |
Maximum number of IPv4 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-evpn |
Maximum number of L2VPN EVPN prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-threshold |
Maximum IPv4 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-evpn |
Maximum L2VPN EVPN prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-vpnv4 |
Maximum VPNv4 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-vpnv6 |
Maximum VPNv6 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold6 |
Maximum IPv6 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-vpnv4 |
Maximum number of VPNv4 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-vpnv6 |
Maximum number of VPNv6 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-warning-only |
Enable/disable IPv4 Only give warning message when limit is exceeded. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-evpn |
Enable/disable only sending warning message when exceeding limit of L2VPN EVPN routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-vpnv4 |
Enable/disable only giving warning message when limit is exceeded for VPNv4 routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-vpnv6 |
Enable/disable warning message when limit is exceeded for VPNv6 routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only6 |
Enable/disable IPv6 Only give warning message when limit is exceeded. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix6 |
Maximum number of IPv6 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
next-hop-self |
Enable/disable IPv4 next-hop calculation for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-rr |
Enable/disable setting nexthop's address to interface's IPv4 address for route-reflector routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-rr6 |
Enable/disable setting nexthop's address to interface's IPv6 address for route-reflector routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-vpnv4 |
Enable/disable setting VPNv4 next-hop to interface's IP address for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-vpnv6 |
Enable/disable use of outgoing interface's IP address as VPNv6 next-hop for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self6 |
Enable/disable IPv6 next-hop calculation for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
override-capability |
Enable/disable override result of capability negotiation. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
passive |
Enable/disable sending of open messages to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
password |
Password used in MD5 authentication. |
password |
Not Specified |
|
||||||||||
|
prefix-list-in |
IPv4 Inbound filter for updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in-vpnv4 |
Inbound filter for VPNv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in-vpnv6 |
Inbound filter for VPNv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in6 |
IPv6 Inbound filter for updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out |
IPv4 Outbound filter for updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out-vpnv4 |
Outbound filter for VPNv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out-vpnv6 |
Outbound filter for VPNv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out6 |
IPv6 Outbound filter for updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
remote-as |
AS number of neighbor. |
user |
Not Specified |
|
||||||||||
|
remove-private-as |
Enable/disable remove private AS number from IPv4 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-evpn |
Enable/disable removing private AS number from L2VPN EVPN outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-vpnv4 |
Enable/disable remove private AS number from VPNv4 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-vpnv6 |
Enable/disable to remove private AS number from VPNv6 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as6 |
Enable/disable remove private AS number from IPv6 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
restart-time |
Graceful restart delay time. |
integer |
Minimum value: 0 Maximum value: 3600 |
0 |
||||||||||
|
retain-stale-time |
Time to retain stale routes. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||||
|
route-map-in |
IPv4 Inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-evpn |
L2VPN EVPN inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-vpnv4 |
VPNv4 inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-vpnv6 |
VPNv6 inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in6 |
IPv6 Inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out |
IPv4 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-evpn |
L2VPN EVPN outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-preferable |
IPv4 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv4 |
VPNv4 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv4-preferable |
VPNv4 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv6 |
VPNv6 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv6-preferable |
VPNv6 outbound route map filter if this neighbor is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out6 |
IPv6 Outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out6-preferable |
IPv6 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-reflector-client |
Enable/disable IPv4 AS route reflector client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-evpn |
Enable/disable L2VPN EVPN AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-vpnv4 |
Enable/disable VPNv4 AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-vpnv6 |
Enable/disable VPNv6 AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client6 |
Enable/disable IPv6 AS route reflector client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client |
Enable/disable IPv4 AS route server client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-evpn |
Enable/disable L2VPN EVPN AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-vpnv4 |
Enable/disable VPNv4 AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-vpnv6 |
Enable/disable VPNv6 AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client6 |
Enable/disable IPv6 AS route server client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
send-community |
IPv4 Send community attribute to neighbor. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-evpn |
Enable/disable sending community attribute to neighbor for L2VPN EVPN address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-vpnv4 |
Send community attribute to neighbor for VPNv4 address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-vpnv6 |
Enable/disable sending community attribute to this neighbor for VPNv6 address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community6 |
IPv6 Send community attribute to neighbor. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
shutdown |
Enable/disable shutdown this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration |
Enable/disable allow IPv4 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-evpn |
Enable/disable L2VPN EVPN inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-vpnv4 |
Enable/disable allow VPNv4 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-vpnv6 |
Enable/disable VPNv6 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration6 |
Enable/disable allow IPv6 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
stale-route |
Enable/disable stale route after neighbor down. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
strict-capability-match |
Enable/disable strict capability matching. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
unsuppress-map |
IPv4 Route map to selectively unsuppress suppressed routes. |
string |
Maximum length: 35 |
|
||||||||||
|
unsuppress-map6 |
IPv6 Route map to selectively unsuppress suppressed routes. |
string |
Maximum length: 35 |
|
||||||||||
|
update-source |
Interface to use as source IP/IPv6 address of TCP connections. |
string |
Maximum length: 15 |
|
||||||||||
|
weight |
Neighbor weight. |
integer |
Minimum value: 0 Maximum value: 65535 |
4294967295 |
||||||||||
config conditional-advertise
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
advertise-routemap |
Name of advertising route map. |
string |
Maximum length: 35 |
|
||||||
|
condition-routemap |
List of conditional route maps. Route map. |
string |
Maximum length: 79 |
|
||||||
|
condition-type |
Type of condition. |
option |
- |
exist |
||||||
|
|
|
|||||||||
config conditional-advertise6
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
advertise-routemap |
Name of advertising route map. |
string |
Maximum length: 35 |
|
||||||
|
condition-routemap |
List of conditional route maps. Route map. |
string |
Maximum length: 79 |
|
||||||
|
condition-type |
Type of condition. |
option |
- |
exist |
||||||
|
|
|
|||||||||
config neighbor-group
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
activate |
Enable/disable address family IPv4 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-evpn |
Enable/disable address family L2VPN EVPN for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-vpnv4 |
Enable/disable address family VPNv4 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate-vpnv6 |
Enable/disable address family VPNv6 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
activate6 |
Enable/disable address family IPv6 for this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
additional-path |
Enable/disable IPv4 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path-vpnv4 |
Enable/disable VPNv4 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path-vpnv6 |
Enable/disable VPNv6 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
additional-path6 |
Enable/disable IPv6 additional-path capability. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
adv-additional-path |
Number of IPv4 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path-vpnv4 |
Number of VPNv4 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path-vpnv6 |
Number of VPNv6 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
adv-additional-path6 |
Number of IPv6 additional paths that can be advertised to this neighbor. |
integer |
Minimum value: 2 Maximum value: 255 |
2 |
||||||||||
|
advertisement-interval |
Minimum interval (sec) between sending updates. |
integer |
Minimum value: 0 Maximum value: 600 |
30 |
||||||||||
|
allowas-in |
IPv4 The maximum number of occurrence of my AS number allowed. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-enable |
Enable/disable IPv4 Enable to allow my AS in AS path. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-evpn |
Enable/disable to allow my AS in AS path for L2VPN EVPN route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-vpnv4 |
Enable/disable to allow my AS in AS path for VPNv4 route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable-vpnv6 |
Enable/disable use of my AS in AS path for VPNv6 route. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-enable6 |
Enable/disable IPv6 Enable to allow my AS in AS path. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
allowas-in-evpn |
The maximum number of occurrence of my AS number allowed for L2VPN EVPN route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-vpnv4 |
The maximum number of occurrence of my AS number allowed for VPNv4 route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in-vpnv6 |
The maximum number of occurrence of my AS number allowed for VPNv6 route. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
allowas-in6 |
IPv6 The maximum number of occurrence of my AS number allowed. |
integer |
Minimum value: 1 Maximum value: 10 |
3 |
||||||||||
|
as-override |
Enable/disable replace peer AS with own AS for IPv4. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
as-override6 |
Enable/disable replace peer AS with own AS for IPv6. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged |
IPv4 List of attributes that should be unchanged. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged-vpnv4 |
List of attributes that should be unchanged for VPNv4 route. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged-vpnv6 |
List of attributes that should not be changed for VPNv6 route. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
attribute-unchanged6 |
IPv6 List of attributes that should be unchanged. |
option |
- |
|
||||||||||
|
|
|
|||||||||||||
|
auth-options |
Key-chain name for TCP authentication options. |
string |
Maximum length: 35 |
|
||||||||||
|
bfd |
Enable/disable BFD for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-default-originate |
Enable/disable advertise default IPv4 route to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-default-originate6 |
Enable/disable advertise default IPv6 route to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-dynamic |
Enable/disable advertise dynamic capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart |
Enable/disable advertise IPv4 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-evpn |
Enable/disable advertisement of L2VPN EVPN graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-vpnv4 |
Enable/disable advertise VPNv4 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart-vpnv6 |
Enable/disable advertisement of VPNv6 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-graceful-restart6 |
Enable/disable advertise IPv6 graceful restart capability to this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
capability-orf |
Accept/Send IPv4 ORF lists to/from this neighbor. |
option |
- |
none |
||||||||||
|
|
|
|||||||||||||
|
capability-orf6 |
Accept/Send IPv6 ORF lists to/from this neighbor. |
option |
- |
none |
||||||||||
|
|
|
|||||||||||||
|
capability-route-refresh |
Enable/disable advertise route refresh capability to this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
connect-timer |
Interval (sec) for connect timer. |
integer |
Minimum value: 1 Maximum value: 65535 |
4294967295 |
||||||||||
|
default-originate-routemap |
Route map to specify criteria to originate IPv4 default. |
string |
Maximum length: 35 |
|
||||||||||
|
default-originate-routemap6 |
Route map to specify criteria to originate IPv6 default. |
string |
Maximum length: 35 |
|
||||||||||
|
description |
Description. |
string |
Maximum length: 63 |
|
||||||||||
|
distribute-list-in |
Filter for IPv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in-vpnv4 |
Filter for VPNv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in-vpnv6 |
Filter for VPNv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-in6 |
Filter for IPv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out |
Filter for IPv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out-vpnv4 |
Filter for VPNv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out-vpnv6 |
Filter for VPNv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
distribute-list-out6 |
Filter for IPv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
dont-capability-negotiate |
Do not negotiate capabilities with this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
ebgp-enforce-multihop |
Enable/disable allow multi-hop EBGP neighbors. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
ebgp-multihop-ttl |
EBGP multihop TTL for this peer. |
integer |
Minimum value: 1 Maximum value: 255 |
255 |
||||||||||
|
filter-list-in |
BGP filter for IPv4 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in-vpnv4 |
BGP filter for VPNv4 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in-vpnv6 |
BGP filter for VPNv6 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-in6 |
BGP filter for IPv6 inbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out |
BGP filter for IPv4 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out-vpnv4 |
BGP filter for VPNv4 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out-vpnv6 |
BGP filter for VPNv6 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
filter-list-out6 |
BGP filter for IPv6 outbound routes. |
string |
Maximum length: 35 |
|
||||||||||
|
holdtime-timer |
Interval (sec) before peer considered dead. |
integer |
Minimum value: 3 Maximum value: 65535 |
4294967295 |
||||||||||
|
interface |
Specify outgoing interface for peer connection. For IPv6 peer, the interface should have link-local address. |
string |
Maximum length: 15 |
|
||||||||||
|
keep-alive-timer |
Keep alive timer interval (sec). |
integer |
Minimum value: 0 Maximum value: 65535 |
4294967295 |
||||||||||
|
link-down-failover |
Enable/disable failover upon link down. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
local-as |
Local AS number of neighbor. |
user |
Not Specified |
|
||||||||||
|
local-as-no-prepend |
Do not prepend local-as to incoming updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
local-as-replace-as |
Replace real AS with local-as in outgoing updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix |
Maximum number of IPv4 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-evpn |
Maximum number of L2VPN EVPN prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-threshold |
Maximum IPv4 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-evpn |
Maximum L2VPN EVPN prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-vpnv4 |
Maximum VPNv4 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold-vpnv6 |
Maximum VPNv6 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-threshold6 |
Maximum IPv6 prefix threshold value. |
integer |
Minimum value: 1 Maximum value: 100 |
75 |
||||||||||
|
maximum-prefix-vpnv4 |
Maximum number of VPNv4 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-vpnv6 |
Maximum number of VPNv6 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
maximum-prefix-warning-only |
Enable/disable IPv4 Only give warning message when limit is exceeded. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-evpn |
Enable/disable only sending warning message when exceeding limit of L2VPN EVPN routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-vpnv4 |
Enable/disable only giving warning message when limit is exceeded for VPNv4 routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only-vpnv6 |
Enable/disable warning message when limit is exceeded for VPNv6 routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix-warning-only6 |
Enable/disable IPv6 Only give warning message when limit is exceeded. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
maximum-prefix6 |
Maximum number of IPv6 prefixes to accept from this peer. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
0 |
||||||||||
|
name |
Neighbor group name. |
string |
Maximum length: 45 |
|
||||||||||
|
next-hop-self |
Enable/disable IPv4 next-hop calculation for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-rr |
Enable/disable setting nexthop's address to interface's IPv4 address for route-reflector routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-rr6 |
Enable/disable setting nexthop's address to interface's IPv6 address for route-reflector routes. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-vpnv4 |
Enable/disable setting VPNv4 next-hop to interface's IP address for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self-vpnv6 |
Enable/disable use of outgoing interface's IP address as VPNv6 next-hop for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
next-hop-self6 |
Enable/disable IPv6 next-hop calculation for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
override-capability |
Enable/disable override result of capability negotiation. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
passive |
Enable/disable sending of open messages to this neighbor. |
option |
- |
enable |
||||||||||
|
|
|
|||||||||||||
|
password |
Password used in MD5 authentication. |
password |
Not Specified |
|
||||||||||
|
prefix-list-in |
IPv4 Inbound filter for updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in-vpnv4 |
Inbound filter for VPNv4 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in-vpnv6 |
Inbound filter for VPNv6 updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-in6 |
IPv6 Inbound filter for updates from this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out |
IPv4 Outbound filter for updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out-vpnv4 |
Outbound filter for VPNv4 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out-vpnv6 |
Outbound filter for VPNv6 updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
prefix-list-out6 |
IPv6 Outbound filter for updates to this neighbor. |
string |
Maximum length: 35 |
|
||||||||||
|
remote-as |
AS number of neighbor. |
user |
Not Specified |
|
||||||||||
|
remote-as-filter |
BGP filter for remote AS. |
string |
Maximum length: 35 |
|
||||||||||
|
remove-private-as |
Enable/disable remove private AS number from IPv4 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-evpn |
Enable/disable removing private AS number from L2VPN EVPN outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-vpnv4 |
Enable/disable remove private AS number from VPNv4 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as-vpnv6 |
Enable/disable to remove private AS number from VPNv6 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
remove-private-as6 |
Enable/disable remove private AS number from IPv6 outbound updates. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
restart-time |
Graceful restart delay time. |
integer |
Minimum value: 0 Maximum value: 3600 |
0 |
||||||||||
|
retain-stale-time |
Time to retain stale routes. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||||
|
route-map-in |
IPv4 Inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-evpn |
L2VPN EVPN inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-vpnv4 |
VPNv4 inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in-vpnv6 |
VPNv6 inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-in6 |
IPv6 Inbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out |
IPv4 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-evpn |
L2VPN EVPN outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-preferable |
IPv4 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv4 |
VPNv4 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv4-preferable |
VPNv4 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv6 |
VPNv6 outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out-vpnv6-preferable |
VPNv6 outbound route map filter if this neighbor is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out6 |
IPv6 Outbound route map filter. |
string |
Maximum length: 35 |
|
||||||||||
|
route-map-out6-preferable |
IPv6 outbound route map filter if the peer is preferred. |
string |
Maximum length: 35 |
|
||||||||||
|
route-reflector-client |
Enable/disable IPv4 AS route reflector client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-evpn |
Enable/disable L2VPN EVPN AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-vpnv4 |
Enable/disable VPNv4 AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client-vpnv6 |
Enable/disable VPNv6 AS route reflector client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-reflector-client6 |
Enable/disable IPv6 AS route reflector client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client |
Enable/disable IPv4 AS route server client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-evpn |
Enable/disable L2VPN EVPN AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-vpnv4 |
Enable/disable VPNv4 AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client-vpnv6 |
Enable/disable VPNv6 AS route server client for this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
route-server-client6 |
Enable/disable IPv6 AS route server client. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
send-community |
IPv4 Send community attribute to neighbor. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-evpn |
Enable/disable sending community attribute to neighbor for L2VPN EVPN address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-vpnv4 |
Send community attribute to neighbor for VPNv4 address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community-vpnv6 |
Enable/disable sending community attribute to this neighbor for VPNv6 address family. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
send-community6 |
IPv6 Send community attribute to neighbor. |
option |
- |
both |
||||||||||
|
|
|
|||||||||||||
|
shutdown |
Enable/disable shutdown this neighbor. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration |
Enable/disable allow IPv4 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-evpn |
Enable/disable L2VPN EVPN inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-vpnv4 |
Enable/disable allow VPNv4 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration-vpnv6 |
Enable/disable VPNv6 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
soft-reconfiguration6 |
Enable/disable allow IPv6 inbound soft reconfiguration. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
stale-route |
Enable/disable stale route after neighbor down. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
strict-capability-match |
Enable/disable strict capability matching. |
option |
- |
disable |
||||||||||
|
|
|
|||||||||||||
|
unsuppress-map |
IPv4 Route map to selectively unsuppress suppressed routes. |
string |
Maximum length: 35 |
|
||||||||||
|
unsuppress-map6 |
IPv6 Route map to selectively unsuppress suppressed routes. |
string |
Maximum length: 35 |
|
||||||||||
|
update-source |
Interface to use as source IP/IPv6 address of TCP connections. |
string |
Maximum length: 15 |
|
||||||||||
|
weight |
Neighbor weight. |
integer |
Minimum value: 0 Maximum value: 65535 |
4294967295 |
||||||||||
config neighbor-range
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
id |
Neighbor range ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
max-neighbor-num |
Maximum number of neighbors. |
integer |
Minimum value: 1 Maximum value: 1000 |
0 |
|
neighbor-group |
Neighbor group name. |
string |
Maximum length: 63 |
|
|
prefix |
Neighbor range prefix. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
config neighbor-range6
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
id |
IPv6 neighbor range ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
max-neighbor-num |
Maximum number of neighbors. |
integer |
Minimum value: 1 Maximum value: 1000 |
0 |
|
neighbor-group |
Neighbor group name. |
string |
Maximum length: 63 |
|
|
prefix6 |
IPv6 prefix. |
ipv6-network |
Not Specified |
::/0 |
config network
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
backdoor |
Enable/disable route as backdoor. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
|
network-import-check |
Configure insurance of BGP network route existence in IGP. |
option |
- |
global |
||||||||
|
|
|
|||||||||||
|
prefix |
Network prefix. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||||
|
route-map |
Route map to modify generated route. |
string |
Maximum length: 35 |
|
||||||||
config network6
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
backdoor |
Enable/disable route as backdoor. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
|
network-import-check |
Configure insurance of BGP network route existence in IGP. |
option |
- |
global |
||||||||
|
|
|
|||||||||||
|
prefix6 |
Network IPv6 prefix. |
ipv6-network |
Not Specified |
::/0 |
||||||||
|
route-map |
Route map to modify generated route. |
string |
Maximum length: 35 |
|
||||||||
config redistribute
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Distribute list entry name. |
string |
Maximum length: 35 |
|
||||||
|
route-map |
Route map name. |
string |
Maximum length: 35 |
|
||||||
|
status |
Status. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config redistribute6
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Distribute list entry name. |
string |
Maximum length: 35 |
|
||||||
|
route-map |
Route map name. |
string |
Maximum length: 35 |
|
||||||
|
status |
Status. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config vrf
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
export-rt |
List of export route target. Attribute: AA:NN|A.B.C.D:NN. |
string |
Maximum length: 79 |
|
||||||||
|
import-route-map |
Import route map. |
string |
Maximum length: 35 |
|
||||||||
|
import-rt |
List of import route target. Attribute: AA:NN|A.B.C.D:NN |
string |
Maximum length: 79 |
|
||||||||
|
rd |
Route Distinguisher: AA:NN|A.B.C.D:NN. |
string |
Maximum length: 79 |
|
||||||||
|
role |
VRF role. |
option |
- |
standalone |
||||||||
|
|
|
|||||||||||
|
vrf |
Origin VRF ID. |
string |
Maximum length: 7 |
|
||||||||
config leak-target
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
interface |
Interface which is used to leak routes to target VRF. |
string |
Maximum length: 15 |
|
|
route-map |
Route map of VRF leaking. |
string |
Maximum length: 35 |
|
|
vrf |
Target VRF ID. |
string |
Maximum length: 7 |
|
config vrf6
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
export-rt |
List of export route target. Attribute: AA:NN|A.B.C.D:NN. |
string |
Maximum length: 79 |
|
||||||||
|
import-route-map |
Import route map. |
string |
Maximum length: 35 |
|
||||||||
|
import-rt |
List of import route target. Attribute: AA:NN|A.B.C.D:NN |
string |
Maximum length: 79 |
|
||||||||
|
rd |
Route Distinguisher: AA:NN|A.B.C.D:NN. |
string |
Maximum length: 79 |
|
||||||||
|
role |
VRF role. |
option |
- |
standalone |
||||||||
|
|
|
|||||||||||
|
vrf |
Origin VRF ID. |
string |
Maximum length: 7 |
|
||||||||
config leak-target
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
interface |
Interface which is used to leak routes to target VRF. |
string |
Maximum length: 15 |
|
|
route-map |
Route map of VRF leaking. |
string |
Maximum length: 35 |
|
|
vrf |
Target VRF ID. |
string |
Maximum length: 7 |
|