config router isis
Configure IS-IS.
config router isis Description: Configure IS-IS. set adjacency-check [enable|disable] set adjacency-check6 [enable|disable] set adv-passive-only [enable|disable] set adv-passive-only6 [enable|disable] set auth-keychain-l1 {string} set auth-keychain-l2 {string} set auth-mode-l1 [password|md5] set auth-mode-l2 [password|md5] set auth-password-l1 {password} set auth-password-l2 {password} set auth-sendonly-l1 [enable|disable] set auth-sendonly-l2 [enable|disable] set default-originate [enable|disable] set default-originate6 [enable|disable] set dynamic-hostname [enable|disable] set ignore-lsp-errors [enable|disable] set is-type [level-1-2|level-1|...] config isis-interface Description: IS-IS interface configuration. edit <name> set auth-keychain-l1 {string} set auth-keychain-l2 {string} set auth-mode-l1 [md5|password] set auth-mode-l2 [md5|password] set auth-password-l1 {password} set auth-password-l2 {password} set auth-send-only-l1 [enable|disable] set auth-send-only-l2 [enable|disable] set circuit-type [level-1-2|level-1|...] set csnp-interval-l1 {integer} set csnp-interval-l2 {integer} set hello-interval-l1 {integer} set hello-interval-l2 {integer} set hello-multiplier-l1 {integer} set hello-multiplier-l2 {integer} set hello-padding [enable|disable] set lsp-interval {integer} set lsp-retransmit-interval {integer} set mesh-group [enable|disable] set mesh-group-id {integer} set metric-l1 {integer} set metric-l2 {integer} set network-type [broadcast|point-to-point|...] set priority-l1 {integer} set priority-l2 {integer} set status [enable|disable] set status6 [enable|disable] set wide-metric-l1 {integer} set wide-metric-l2 {integer} next end config isis-net Description: IS-IS net configuration. edit <id> set net {user} next end set lsp-gen-interval-l1 {integer} set lsp-gen-interval-l2 {integer} set lsp-refresh-interval {integer} set max-lsp-lifetime {integer} set metric-style [narrow|wide|...] set overload-bit [enable|disable] set overload-bit-on-startup {integer} set overload-bit-suppress {option1}, {option2}, ... config redistribute Description: IS-IS redistribute protocols. Read-only. edit <protocol> set level [level-1-2|level-1|...] set metric {integer} set metric-type [external|internal] set routemap {string} set status [enable|disable] next end set redistribute-l1 [enable|disable] set redistribute-l1-list {string} set redistribute-l2 [enable|disable] set redistribute-l2-list {string} config redistribute6 Description: IS-IS IPv6 redistribution for routing protocols. Read-only. edit <protocol> set level [level-1-2|level-1|...] set metric {integer} set metric-type [external|internal] set routemap {string} set status [enable|disable] next end set redistribute6-l1 [enable|disable] set redistribute6-l1-list {string} set redistribute6-l2 [enable|disable] set redistribute6-l2-list {string} set spf-interval-exp-l1 {user} set spf-interval-exp-l2 {user} config summary-address Description: IS-IS summary addresses. edit <id> set level [level-1-2|level-1|...] set prefix {ipv4-classnet-any} next end config summary-address6 Description: IS-IS IPv6 summary address. edit <id> set level [level-1-2|level-1|...] set prefix6 {ipv6-prefix} next end end
config router isis
Parameter |
Description |
Type |
Size |
Default |
||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
adjacency-check |
Enable/disable adjacency check. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adjacency-check6 |
Enable/disable IPv6 adjacency check. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adv-passive-only |
Enable/disable IS-IS advertisement of passive interfaces only. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
adv-passive-only6 |
Enable/disable IPv6 IS-IS advertisement of passive interfaces only. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-keychain-l1 |
Authentication key-chain for level 1 PDUs. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
auth-keychain-l2 |
Authentication key-chain for level 2 PDUs. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
auth-mode-l1 |
Level 1 authentication mode. |
option |
- |
password |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-mode-l2 |
Level 2 authentication mode. |
option |
- |
password |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-password-l1 |
Authentication password for level 1 PDUs. |
password |
Not Specified |
|
||||||||||||||||||||||||||||
auth-password-l2 |
Authentication password for level 2 PDUs. |
password |
Not Specified |
|
||||||||||||||||||||||||||||
auth-sendonly-l1 |
Enable/disable level 1 authentication send-only. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
auth-sendonly-l2 |
Enable/disable level 2 authentication send-only. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
default-originate |
Enable/disable distribution of default route information. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
default-originate6 |
Enable/disable distribution of default IPv6 route information. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
dynamic-hostname |
Enable/disable dynamic hostname. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
ignore-lsp-errors |
Enable/disable ignoring of LSP errors with bad checksums. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
is-type |
IS type. |
option |
- |
level-1-2 |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
lsp-gen-interval-l1 |
Minimum interval for level 1 LSP regenerating. |
integer |
Minimum value: 1 Maximum value: 120 |
30 |
||||||||||||||||||||||||||||
lsp-gen-interval-l2 |
Minimum interval for level 2 LSP regenerating. |
integer |
Minimum value: 1 Maximum value: 120 |
30 |
||||||||||||||||||||||||||||
lsp-refresh-interval |
LSP refresh time in seconds. |
integer |
Minimum value: 1 Maximum value: 65535 |
900 |
||||||||||||||||||||||||||||
max-lsp-lifetime |
Maximum LSP lifetime in seconds. |
integer |
Minimum value: 350 Maximum value: 65535 |
1200 |
||||||||||||||||||||||||||||
metric-style |
Use old-style (ISO 10589) or new-style packet formats. |
option |
- |
narrow |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
overload-bit |
Enable/disable signal other routers not to use us in SPF. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
overload-bit-on-startup |
Overload-bit only temporarily after reboot. |
integer |
Minimum value: 5 Maximum value: 86400 |
0 |
||||||||||||||||||||||||||||
overload-bit-suppress |
Suppress overload-bit for the specific prefixes. |
option |
- |
|
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l1 |
Enable/disable redistribution of level 1 routes into level 2. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l1-list |
Access-list for route redistribution from l1 to l2. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
redistribute-l2 |
Enable/disable redistribution of level 2 routes into level 1. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute-l2-list |
Access-list for route redistribution from l2 to l1. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
redistribute6-l1 |
Enable/disable redistribution of level 1 IPv6 routes into level 2. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute6-l1-list |
Access-list for IPv6 route redistribution from l1 to l2. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
redistribute6-l2 |
Enable/disable redistribution of level 2 IPv6 routes into level 1. |
option |
- |
disable |
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
redistribute6-l2-list |
Access-list for IPv6 route redistribution from l2 to l1. |
string |
Maximum length: 35 |
|
||||||||||||||||||||||||||||
spf-interval-exp-l1 |
Level 1 SPF calculation delay. |
user |
Not Specified |
|
||||||||||||||||||||||||||||
spf-interval-exp-l2 |
Level 2 SPF calculation delay. |
user |
Not Specified |
|
config isis-interface
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
auth-keychain-l1 |
Authentication key-chain for level 1 PDUs. |
string |
Maximum length: 35 |
|
||||||||
auth-keychain-l2 |
Authentication key-chain for level 2 PDUs. |
string |
Maximum length: 35 |
|
||||||||
auth-mode-l1 |
Level 1 authentication mode. |
option |
- |
password |
||||||||
|
|
|||||||||||
auth-mode-l2 |
Level 2 authentication mode. |
option |
- |
password |
||||||||
|
|
|||||||||||
auth-password-l1 |
Authentication password for level 1 PDUs. |
password |
Not Specified |
|
||||||||
auth-password-l2 |
Authentication password for level 2 PDUs. |
password |
Not Specified |
|
||||||||
auth-send-only-l1 |
Enable/disable authentication send-only for level 1 PDUs. |
option |
- |
disable |
||||||||
|
|
|||||||||||
auth-send-only-l2 |
Enable/disable authentication send-only for level 2 PDUs. |
option |
- |
disable |
||||||||
|
|
|||||||||||
circuit-type |
IS-IS interface's circuit type. |
option |
- |
level-1-2 |
||||||||
|
|
|||||||||||
csnp-interval-l1 |
Level 1 CSNP interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
10 |
||||||||
csnp-interval-l2 |
Level 2 CSNP interval. |
integer |
Minimum value: 1 Maximum value: 65535 |
10 |
||||||||
hello-interval-l1 |
Level 1 hello interval. |
integer |
Minimum value: 0 Maximum value: 65535 |
10 |
||||||||
hello-interval-l2 |
Level 2 hello interval. |
integer |
Minimum value: 0 Maximum value: 65535 |
10 |
||||||||
hello-multiplier-l1 |
Level 1 multiplier for Hello holding time. |
integer |
Minimum value: 2 Maximum value: 100 |
3 |
||||||||
hello-multiplier-l2 |
Level 2 multiplier for Hello holding time. |
integer |
Minimum value: 2 Maximum value: 100 |
3 |
||||||||
hello-padding |
Enable/disable padding to IS-IS hello packets. |
option |
- |
enable |
||||||||
|
|
|||||||||||
lsp-interval |
LSP transmission interval (milliseconds). |
integer |
Minimum value: 1 Maximum value: 4294967295 |
33 |
||||||||
lsp-retransmit-interval |
LSP retransmission interval (sec). |
integer |
Minimum value: 1 Maximum value: 65535 |
5 |
||||||||
mesh-group |
Enable/disable IS-IS mesh group. |
option |
- |
disable |
||||||||
|
|
|||||||||||
mesh-group-id |
Mesh group ID <0-4294967295>, 0: mesh-group blocked. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
metric-l1 |
Level 1 metric for interface. |
integer |
Minimum value: 1 Maximum value: 63 |
10 |
||||||||
metric-l2 |
Level 2 metric for interface. |
integer |
Minimum value: 1 Maximum value: 63 |
10 |
||||||||
name |
IS-IS interface name. |
string |
Maximum length: 15 |
|
||||||||
network-type |
IS-IS interface's network type. |
option |
- |
|
||||||||
|
|
|||||||||||
priority-l1 |
Level 1 priority. |
integer |
Minimum value: 0 Maximum value: 127 |
64 |
||||||||
priority-l2 |
Level 2 priority. |
integer |
Minimum value: 0 Maximum value: 127 |
64 |
||||||||
status |
Enable/disable interface for IS-IS. |
option |
- |
disable |
||||||||
|
|
|||||||||||
status6 |
Enable/disable IPv6 interface for IS-IS. |
option |
- |
disable |
||||||||
|
|
|||||||||||
wide-metric-l1 |
Level 1 wide metric for interface. |
integer |
Minimum value: 1 Maximum value: 16777214 |
10 |
||||||||
wide-metric-l2 |
Level 2 wide metric for interface. |
integer |
Minimum value: 1 Maximum value: 16777214 |
10 |
config isis-net
Parameter |
Description |
Type |
Size |
Default |
---|---|---|---|---|
id |
ISIS network ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
net |
IS-IS networks (format = xx.xxxx. .xxxx.xx.). |
user |
Not Specified |
|
config redistribute
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
level |
Level. |
option |
- |
level-2 |
||||||||
|
|
|||||||||||
metric |
Metric. |
integer |
Minimum value: 0 Maximum value: 4261412864 |
0 |
||||||||
metric-type |
Metric type. |
option |
- |
internal |
||||||||
|
|
|||||||||||
protocol |
Protocol name. |
string |
Maximum length: 35 |
|
||||||||
routemap |
Route map name. |
string |
Maximum length: 35 |
|
||||||||
status |
Status. |
option |
- |
disable |
||||||||
|
|
config redistribute6
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
level |
Level. |
option |
- |
level-2 |
||||||||
|
|
|||||||||||
metric |
Metric. |
integer |
Minimum value: 0 Maximum value: 4261412864 |
0 |
||||||||
metric-type |
Metric type. |
option |
- |
internal |
||||||||
|
|
|||||||||||
protocol |
Protocol name. |
string |
Maximum length: 35 |
|
||||||||
routemap |
Route map name. |
string |
Maximum length: 35 |
|
||||||||
status |
Enable/disable redistribution. |
option |
- |
disable |
||||||||
|
|
config summary-address
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
id |
Summary address entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
level |
Level. |
option |
- |
level-2 |
||||||||
|
|
|||||||||||
prefix |
Prefix. |
ipv4-classnet-any |
Not Specified |
0.0.0.0 0.0.0.0 |
config summary-address6
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
id |
Prefix entry ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
level |
Level. |
option |
- |
level-2 |
||||||||
|
|
|||||||||||
prefix6 |
IPv6 prefix. |
ipv6-prefix |
Not Specified |
::/0 |