config ztna traffic-forward-proxy-reverse-service

Configure ZTNA traffic forward proxy reverse service.

config ztna traffic-forward-proxy-reverse-service
    Description: Configure ZTNA traffic forward proxy reverse service.
    config remote-servers
        Description: Connector Remote server
        edit <name>
            set address {string}
            set certificate {string}
            set health-check-interval {integer}
            set port {integer}
            set ssl-max-version [tls-1.1|tls-1.2|...]
            set status [enable|disable]
            set trusted-server-ca {string}
        next
    end
end

config remote-servers

Parameter	Description	Type	Size	Default
address	Server adress(IP or FQDN).	string	Maximum length: 255
certificate	The name of the certificate to use for SSL handshake.	string	Maximum length: 35
health-check-interval	Health check interval in seconds (0 - 600, default = 60, 0 = disable).	integer	Minimum value: 0 Maximum value: 600	60
name	Remote server name	string	Maximum length: 35
port	Port number that traffic uses to connect to remote server (0 - 65535;).	integer	Minimum value: 0 Maximum value: 65535	0
ssl-max-version	Highest TLS version acceptable from a server.	option	-	tls-1.3
	Option Description tls-1.1 TLS 1.1. tls-1.2 TLS 1.2. tls-1.3 TLS 1.3.
status	Remote server status.	option	-	enable
	Option Description enable Enable the server. disable Disable the server.
trusted-server-ca	Trusted Server CA certificate used by SSL connection.	string	Maximum length: 79