Fortinet white logo
Fortinet white logo

CLI Reference

config vpn ipsec phase1

config vpn ipsec phase1

Configure VPN remote gateway.

config vpn ipsec phase1
    Description: Configure VPN remote gateway.
    edit <name>
        set acct-verify [enable|disable]
        set add-gw-route [enable|disable]
        set add-route [disable|enable]
        set addke1 {option1}, {option2}, ...
        set addke2 {option1}, {option2}, ...
        set addke3 {option1}, {option2}, ...
        set addke4 {option1}, {option2}, ...
        set addke5 {option1}, {option2}, ...
        set addke6 {option1}, {option2}, ...
        set addke7 {option1}, {option2}, ...
        set assign-ip [disable|enable]
        set assign-ip-from [range|usrgrp|...]
        set authmethod [psk|signature]
        set authmethod-remote [psk|signature]
        set authpasswd {password}
        set authusr {string}
        set authusrgrp {string}
        set auto-negotiate [enable|disable]
        set auto-transport-threshold {integer}
        set azure-ad-autoconnect [enable|disable]
        set backup-gateway <address1>, <address2>, ...
        set banner {var-string}
        set cert-id-validation [enable|disable]
        set cert-peer-username-strip [disable|enable]
        set cert-peer-username-validation [none|othername|...]
        set cert-trust-store [local|ems]
        set certificate <name1>, <name2>, ...
        set childless-ike [enable|disable]
        set client-auto-negotiate [disable|enable]
        set client-keep-alive [disable|enable]
        set client-resume [enable|disable]
        set client-resume-interval {integer}
        set comments {var-string}
        set dev-id {string}
        set dev-id-notification [disable|enable]
        set dhcp-ra-giaddr {ipv4-address}
        set dhcp6-ra-linkaddr {ipv6-address}
        set dhgrp {option1}, {option2}, ...
        set digital-signature-auth [enable|disable]
        set distance {integer}
        set dns-mode [manual|auto]
        set domain {string}
        set dpd [disable|on-idle|...]
        set dpd-retrycount {integer}
        set dpd-retryinterval {user}
        set eap [enable|disable]
        set eap-cert-auth [enable|disable]
        set eap-exclude-peergrp {string}
        set eap-identity [use-id-payload|send-request]
        set ems-sn-check [enable|disable]
        set enforce-unique-id [disable|keep-new|...]
        set esn [require|allow|...]
        set exchange-fgt-device-id [enable|disable]
        set fec-base {integer}
        set fec-codec [rs|xor]
        set fec-egress [enable|disable]
        set fec-health-check {string}
        set fec-ingress [enable|disable]
        set fec-mapping-profile {string}
        set fec-receive-timeout {integer}
        set fec-redundant {integer}
        set fec-send-timeout {integer}
        set fgsp-sync [enable|disable]
        set fortinet-esp [enable|disable]
        set fragmentation [enable|disable]
        set fragmentation-mtu {integer}
        set group-authentication [enable|disable]
        set group-authentication-secret {password-3}
        set ha-sync-esp-seqno [enable|disable]
        set idle-timeout [enable|disable]
        set idle-timeoutinterval {integer}
        set ike-version [1|2]
        set inbound-dscp-copy [enable|disable]
        set include-local-lan [disable|enable]
        set interface {string}
        set internal-domain-list <domain-name1>, <domain-name2>, ...
        set ip-delay-interval {integer}
        set ipv4-dns-server1 {ipv4-address}
        set ipv4-dns-server2 {ipv4-address}
        set ipv4-dns-server3 {ipv4-address}
        set ipv4-end-ip {ipv4-address}
        config ipv4-exclude-range
            Description: Configuration Method IPv4 exclude ranges.
            edit <id>
                set end-ip {ipv4-address}
                set start-ip {ipv4-address}
            next
        end
        set ipv4-name {string}
        set ipv4-netmask {ipv4-netmask}
        set ipv4-split-exclude {string}
        set ipv4-split-include {string}
        set ipv4-start-ip {ipv4-address}
        set ipv4-wins-server1 {ipv4-address}
        set ipv4-wins-server2 {ipv4-address}
        set ipv6-auto-linklocal [enable|disable]
        set ipv6-dns-server1 {ipv6-address}
        set ipv6-dns-server2 {ipv6-address}
        set ipv6-dns-server3 {ipv6-address}
        set ipv6-end-ip {ipv6-address}
        config ipv6-exclude-range
            Description: Configuration method IPv6 exclude ranges.
            edit <id>
                set end-ip {ipv6-address}
                set start-ip {ipv6-address}
            next
        end
        set ipv6-name {string}
        set ipv6-prefix {integer}
        set ipv6-split-exclude {string}
        set ipv6-split-include {string}
        set ipv6-start-ip {ipv6-address}
        set keepalive {integer}
        set keylife {integer}
        set kms {string}
        set link-cost {integer}
        set local-gw {ipv4-address}
        set localid {string}
        set localid-type [auto|fqdn|...]
        set loopback-asymroute [enable|disable]
        set mesh-selector-type [disable|subnet|...]
        set mode [aggressive|main]
        set mode-cfg [disable|enable]
        set mode-cfg-allow-client-selector [disable|enable]
        set nattraversal [enable|disable|...]
        set negotiate-timeout {integer}
        set network-id {integer}
        set network-overlay [disable|enable]
        set npu-offload [enable|disable]
        set peer {string}
        set peergrp {string}
        set peerid {string}
        set peertype [any|one|...]
        set ppk [disable|allow|...]
        set ppk-identity {string}
        set ppk-secret {password-3}
        set priority {integer}
        set proposal {option1}, {option2}, ...
        set psksecret {password-3}
        set psksecret-remote {password-3}
        set qkd [disable|allow|...]
        set qkd-profile {string}
        set reauth [disable|enable]
        set rekey [enable|disable]
        set remote-gw {ipv4-address}
        set remote-gw-country {string}
        set remote-gw-end-ip {ipv4-address-any}
        set remote-gw-match [any|ipmask|...]
        set remote-gw-start-ip {ipv4-address-any}
        set remote-gw-subnet {ipv4-classnet-any}
        set remote-gw-ztna-tags <name1>, <name2>, ...
        set remote-gw6-country {string}
        set remote-gw6-end-ip {ipv6-address}
        set remote-gw6-match [any|ipprefix|...]
        set remote-gw6-start-ip {ipv6-address}
        set remote-gw6-subnet {ipv6-network}
        set remotegw-ddns {string}
        set rsa-signature-format [pkcs1|pss]
        set rsa-signature-hash-override [enable|disable]
        set save-password [disable|enable]
        set send-cert-chain [enable|disable]
        set shared-idle-timeout [enable|disable]
        set signature-hash-alg {option1}, {option2}, ...
        set split-include-service {string}
        set suite-b [disable|suite-b-gcm-128|...]
        set transport [udp|auto|...]
        set type [static|dynamic|...]
        set unity-support [disable|enable]
        set usrgrp {string}
        set wizard-type [custom|dialup-forticlient|...]
        set xauthtype [disable|client|...]
    next
end

config vpn ipsec phase1

Parameter

Description

Type

Size

Default

acct-verify

Enable/disable verification of RADIUS accounting record.

option

-

disable

Option

Description

enable

Enable verification of RADIUS accounting record.

disable

Disable verification of RADIUS accounting record.

add-gw-route

Enable/disable automatically add a route to the remote gateway.

option

-

disable

Option

Description

enable

Automatically add a route to the remote gateway.

disable

Do not automatically add a route to the remote gateway.

add-route

Enable/disable control addition of a route to peer destination selector.

option

-

disable

Option

Description

disable

Do not add a route to destination of peer selector.

enable

Add route to destination of peer selector.

addke1

ADDKE1 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke2

ADDKE2 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke3

ADDKE3 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke4

ADDKE4 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke5

ADDKE5 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke6

ADDKE6 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke7

ADDKE7 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

assign-ip

Enable/disable assignment of IP to IPsec interface via configuration method.

option

-

enable

Option

Description

disable

Do not assign an IP address to the IPsec interface.

enable

Assign an IP address to the IPsec interface.

assign-ip-from

Method by which the IP address will be assigned.

option

-

range

Option

Description

range

Assign IP address from locally defined range.

usrgrp

Assign IP address via user group.

dhcp

Assign IP address via DHCP.

name

Assign IP address from firewall address or group.

authmethod

Authentication method.

option

-

psk

Option

Description

psk

PSK authentication method.

signature

Signature authentication method.

authmethod-remote

Authentication method (remote side).

option

-

Option

Description

psk

PSK authentication method.

signature

Signature authentication method.

authpasswd

XAuth password (max 35 characters).

password

Not Specified

authusr

XAuth user name.

string

Maximum length: 64

authusrgrp

Authentication user group.

string

Maximum length: 35

auto-negotiate

Enable/disable automatic initiation of IKE SA negotiation.

option

-

enable

Option

Description

enable

Enable automatic initiation of IKE SA negotiation.

disable

Disable automatic initiation of IKE SA negotiation.

auto-transport-threshold

Timeout in seconds before falling back to next transport protocol.

integer

Minimum value: 1 Maximum value: 300

15

azure-ad-autoconnect

Enable/disable Azure AD Auto-Connect for FortiClient.

option

-

disable

Option

Description

enable

Enable Azure AD Auto-Connect for FortiClient.

disable

Disable Azure AD Auto-Connect for FortiClient.

backup-gateway <address>

Instruct unity clients about the backup gateway address(es).

Address of backup gateway.

string

Maximum length: 79

banner

Message that unity client should display after connecting.

var-string

Maximum length: 1024

cert-id-validation

Enable/disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

option

-

enable

Option

Description

enable

Enable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

disable

Disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

cert-peer-username-strip

Enable/disable domain stripping on certificate identity.

option

-

disable

Option

Description

disable

Disable domain stripping on certificate identity.

enable

Enable domain stripping on certificate identity.

cert-peer-username-validation

Enable/disable cross validation of peer username and the identity in the peer's certificate.

option

-

none

Option

Description

none

Disable cross validation of peer username and the identity in the peer's certificate.

othername

Validate principal name in SAN othername.

rfc822name

Validate RFC822 email address in SAN.

cn

Validate CN in subject.

cert-trust-store

CA certificate trust store.

option

-

local

Option

Description

local

Use local CA certificate.

ems

Use EMS CA certificate.

certificate <name>

Names of up to 4 signed personal certificates.

Certificate name.

string

Maximum length: 79

childless-ike

Enable/disable childless IKEv2 initiation (RFC 6023).

option

-

disable

Option

Description

enable

Enable childless IKEv2 initiation (RFC 6023).

disable

Disable childless IKEv2 initiation (RFC 6023).

client-auto-negotiate

Enable/disable allowing the VPN client to bring up the tunnel when there is no traffic.

option

-

disable

Option

Description

disable

Disable allowing the VPN client to bring up the tunnel when there is no traffic.

enable

Enable allowing the VPN client to bring up the tunnel when there is no traffic.

client-keep-alive

Enable/disable allowing the VPN client to keep the tunnel up when there is no traffic.

option

-

disable

Option

Description

disable

Disable allowing the VPN client to keep the tunnel up when there is no traffic.

enable

Enable allowing the VPN client to keep the tunnel up when there is no traffic.

client-resume

Enable/disable resumption of offline FortiClient sessions. When a FortiClient enabled laptop is closed or enters sleep/hibernate mode, enabling this feature allows FortiClient to keep the tunnel during this period, and allows users to immediately resume using the IPsec tunnel when the device wakes up.

option

-

disable

Option

Description

enable

Enable client session resumption.

disable

Disable client session resumption.

client-resume-interval

Maximum time in seconds during which a VPN client may resume using a tunnel after a client PC has entered sleep mode or temporarily lost its network connection.

integer

Minimum value: 120 Maximum value: 172800

7200

comments

Comment.

var-string

Maximum length: 255

dev-id

Device ID carried by the device ID notification.

string

Maximum length: 63

dev-id-notification

Enable/disable device ID notification.

option

-

disable

Option

Description

disable

Disable device ID notification.

enable

Enable device ID notification.

dhcp-ra-giaddr

Relay agent gateway IP address to use in the giaddr field of DHCP requests.

ipv4-address

Not Specified

0.0.0.0

dhcp6-ra-linkaddr

Relay agent IPv6 link address to use in DHCP6 requests.

ipv6-address

Not Specified

::

dhgrp

DH group.

option

-

14

Option

Description

1

DH Group 1.

2

DH Group 2.

5

DH Group 5.

14

DH Group 14.

15

DH Group 15.

16

DH Group 16.

17

DH Group 17.

18

DH Group 18.

19

DH Group 19.

20

DH Group 20.

21

DH Group 21.

27

DH Group 27.

28

DH Group 28.

29

DH Group 29.

30

DH Group 30.

31

DH Group 31.

32

DH Group 32.

digital-signature-auth

Enable/disable IKEv2 Digital Signature Authentication (RFC 7427).

option

-

disable

Option

Description

enable

Enable IKEv2 Digital Signature Authentication (RFC 7427).

disable

Disable IKEv2 Digital Signature Authentication (RFC 7427).

distance

Distance for routes added by IKE.

integer

Minimum value: 1 Maximum value: 255

15

dns-mode

DNS server mode.

option

-

manual

Option

Description

manual

Manually configure DNS servers.

auto

Use default DNS servers.

domain

Instruct unity clients about the single default DNS domain.

string

Maximum length: 63

dpd

Dead Peer Detection mode.

option

-

on-demand

Option

Description

disable

Disable Dead Peer Detection.

on-idle

Trigger Dead Peer Detection when IPsec is idle.

on-demand

Trigger Dead Peer Detection when IPsec traffic is sent but no reply is received from the peer.

dpd-retrycount

Number of DPD retry attempts.

integer

Minimum value: 0 Maximum value: 10

3

dpd-retryinterval

DPD retry interval.

user

Not Specified

eap

Enable/disable IKEv2 EAP authentication.

option

-

disable

Option

Description

enable

Enable IKEv2 EAP authentication.

disable

Disable IKEv2 EAP authentication.

eap-cert-auth

Enable/disable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

option

-

disable

Option

Description

enable

Enable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

disable

Disable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

eap-exclude-peergrp

Peer group excluded from EAP authentication.

string

Maximum length: 35

eap-identity

IKEv2 EAP peer identity type.

option

-

use-id-payload

Option

Description

use-id-payload

Use IKEv2 IDi payload to resolve peer identity.

send-request

Use EAP identity request to resolve peer identity.

ems-sn-check

Enable/disable verification of EMS serial number.

option

-

disable

Option

Description

enable

Enable EMS serial number verification.

disable

Disable EMS serial number verification.

enforce-unique-id

Enable/disable peer ID uniqueness check.

option

-

disable

Option

Description

disable

Disable peer ID uniqueness enforcement.

keep-new

Enforce peer ID uniqueness, keep new connection if collision found.

keep-old

Enforce peer ID uniqueness, keep old connection if collision found.

esn *

Extended sequence number (ESN) negotiation.

option

-

disable

Option

Description

require

Require extended sequence number.

allow

Allow extended sequence number.

disable

Disable extended sequence number.

exchange-fgt-device-id

Enable/disable device identifier exchange with peer FortiGate units for use of VPN monitor data by FortiManager.

option

-

disable

Option

Description

enable

Enable exchange of FortiGate device identifier.

disable

Disable exchange of FortiGate device identifier.

fec-base

Number of base Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 20

10

fec-codec

Forward Error Correction encoding/decoding algorithm.

option

-

rs

Option

Description

rs

Reed-Solomon FEC algorithm.

xor

XOR FEC algorithm.

fec-egress

Enable/disable Forward Error Correction for egress IPsec traffic.

option

-

disable

Option

Description

enable

Enable Forward Error Correction for egress IPsec traffic.

disable

Disable Forward Error Correction for egress IPsec traffic.

fec-health-check

SD-WAN health check.

string

Maximum length: 35

fec-ingress

Enable/disable Forward Error Correction for ingress IPsec traffic.

option

-

disable

Option

Description

enable

Enable Forward Error Correction for ingress IPsec traffic.

disable

Disable Forward Error Correction for ingress IPsec traffic.

fec-mapping-profile

Forward Error Correction (FEC) mapping profile.

string

Maximum length: 35

fec-receive-timeout

Timeout in milliseconds before dropping Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 1000

50

fec-redundant

Number of redundant Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 5

1

fec-send-timeout

Timeout in milliseconds before sending Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 1000

5

fgsp-sync

Enable/disable IPsec syncing of tunnels for FGSP IPsec.

option

-

disable

Option

Description

enable

Enable IPsec syncing of tunnels to other cluster members.

disable

Disable IPsec syncing of tunnels to other cluster members.

fortinet-esp

Enable/disable Fortinet ESP encapsulaton.

option

-

disable

Option

Description

enable

Enable Fortinet ESP encapsulation.

disable

Disable Fortinet ESP encapsulaton.

fragmentation

Enable/disable fragment IKE message on re-transmission.

option

-

enable

Option

Description

enable

Enable intra-IKE fragmentation support on re-transmission.

disable

Disable intra-IKE fragmentation support.

fragmentation-mtu

IKE fragmentation MTU.

integer

Minimum value: 500 Maximum value: 16000

1200

group-authentication

Enable/disable IKEv2 IDi group authentication.

option

-

disable

Option

Description

enable

Enable IKEv2 IDi group authentication.

disable

Disable IKEv2 IDi group authentication.

group-authentication-secret

Password for IKEv2 ID group authentication. ASCII string or hexadecimal indicated by a leading 0x.

password-3

Not Specified

ha-sync-esp-seqno

Enable/disable sequence number jump ahead for IPsec HA.

option

-

enable

Option

Description

enable

Enable HA syncing of ESP sequence numbers.

disable

Disable HA syncing of ESP sequence numbers.

idle-timeout

Enable/disable IPsec tunnel idle timeout.

option

-

disable

Option

Description

enable

Enable IPsec tunnel idle timeout.

disable

Disable IPsec tunnel idle timeout.

idle-timeoutinterval

IPsec tunnel idle timeout in minutes.

integer

Minimum value: 5 Maximum value: 43200

15

ike-version

IKE protocol version.

option

-

1

Option

Description

1

Use IKEv1 protocol.

2

Use IKEv2 protocol.

inbound-dscp-copy

Enable/disable copy the dscp in the ESP header to the inner IP Header.

option

-

disable

Option

Description

enable

Enable copy the dscp in the ESP header to the inner IP Header.

disable

Disable copy the dscp in the ESP header to the inner IP Header.

include-local-lan

Enable/disable allow local LAN access on unity clients.

option

-

disable

Option

Description

disable

Disable local LAN access on Unity clients.

enable

Enable local LAN access on Unity clients.

interface

Local physical, aggregate, or VLAN outgoing interface.

string

Maximum length: 35

internal-domain-list <domain-name>

One or more internal domain names in quotes separated by spaces.

Domain name.

string

Maximum length: 79

ip-delay-interval

IP address reuse delay interval in seconds.

integer

Minimum value: 0 Maximum value: 28800

0

ipv4-dns-server1

IPv4 DNS server 1.

ipv4-address

Not Specified

0.0.0.0

ipv4-dns-server2

IPv4 DNS server 2.

ipv4-address

Not Specified

0.0.0.0

ipv4-dns-server3

IPv4 DNS server 3.

ipv4-address

Not Specified

0.0.0.0

ipv4-end-ip

End of IPv4 range.

ipv4-address

Not Specified

0.0.0.0

ipv4-name

IPv4 address name.

string

Maximum length: 79

ipv4-netmask

IPv4 Netmask.

ipv4-netmask

Not Specified

255.255.255.255

ipv4-split-exclude

IPv4 subnets that should not be sent over the IPsec tunnel.

string

Maximum length: 79

ipv4-split-include

IPv4 split-include subnets.

string

Maximum length: 79

ipv4-start-ip

Start of IPv4 range.

ipv4-address

Not Specified

0.0.0.0

ipv4-wins-server1

WINS server 1.

ipv4-address

Not Specified

0.0.0.0

ipv4-wins-server2

WINS server 2.

ipv4-address

Not Specified

0.0.0.0

ipv6-auto-linklocal

Enable/disable auto generation of IPv6 link-local address using last 8 bytes of mode-cfg assigned IPv6 address.

option

-

disable

Option

Description

enable

Enable mode-cfg auto configuration of IPv6 link-local address.

disable

Disable mode-cfg auto configuration of IPv6 link-local address.

ipv6-dns-server1

IPv6 DNS server 1.

ipv6-address

Not Specified

::

ipv6-dns-server2

IPv6 DNS server 2.

ipv6-address

Not Specified

::

ipv6-dns-server3

IPv6 DNS server 3.

ipv6-address

Not Specified

::

ipv6-end-ip

End of IPv6 range.

ipv6-address

Not Specified

::

ipv6-name

IPv6 address name.

string

Maximum length: 79

ipv6-prefix

IPv6 prefix.

integer

Minimum value: 1 Maximum value: 128

128

ipv6-split-exclude

IPv6 subnets that should not be sent over the IPsec tunnel.

string

Maximum length: 79

ipv6-split-include

IPv6 split-include subnets.

string

Maximum length: 79

ipv6-start-ip

Start of IPv6 range.

ipv6-address

Not Specified

::

keepalive

NAT-T keep alive interval.

integer

Minimum value: 5 Maximum value: 900

10

keylife

Time to wait in seconds before phase 1 encryption key expires.

integer

Minimum value: 120 Maximum value: 172800

86400

kms

Key Management Services server.

string

Maximum length: 35

link-cost

VPN tunnel underlay link cost.

integer

Minimum value: 0 Maximum value: 255

0

local-gw

Local VPN gateway.

ipv4-address

Not Specified

0.0.0.0

localid

Local ID.

string

Maximum length: 63

localid-type

Local ID type.

option

-

auto

Option

Description

auto

Select ID type automatically.

fqdn

Use fully qualified domain name.

user-fqdn

Use user fully qualified domain name.

keyid

Use key-id string.

address

Use local IP address.

asn1dn

Use ASN.1 distinguished name.

loopback-asymroute

Enable/disable asymmetric routing for IKE traffic on loopback interface.

option

-

enable

Option

Description

enable

Allow ingress/egress IKE traffic to be routed over different interfaces.

disable

Ingress/egress IKE traffic must be routed over the same interface.

mesh-selector-type

Add selectors containing subsets of the configuration depending on traffic.

option

-

disable

Option

Description

disable

Disable.

subnet

Enable addition of matching subnet selector.

host

Enable addition of host to host selector.

mode

ID protection mode used to establish a secure channel.

option

-

main

Option

Description

aggressive

Aggressive mode.

main

Main mode.

mode-cfg

Enable/disable configuration method.

option

-

disable

Option

Description

disable

Disable Configuration Method.

enable

Enable Configuration Method.

mode-cfg-allow-client-selector

Enable/disable mode-cfg client to use custom phase2 selectors.

option

-

disable

Option

Description

disable

Mode-cfg client to use wildcard selectors.

enable

Mode-cfg client to use custom selectors.

name

IPsec remote gateway name.

string

Maximum length: 35

nattraversal

Enable/disable NAT traversal.

option

-

enable

Option

Description

enable

Enable IPsec NAT traversal.

disable

Disable IPsec NAT traversal.

forced

Force IPsec NAT traversal on.

negotiate-timeout

IKE SA negotiation timeout in seconds.

integer

Minimum value: 1 Maximum value: 300

30

network-id

VPN gateway network ID.

integer

Minimum value: 0 Maximum value: 255

0

network-overlay

Enable/disable network overlays.

option

-

disable

Option

Description

disable

Disable network overlays.

enable

Enable network overlays.

npu-offload *

Enable/disable offloading NPU.

option

-

enable

Option

Description

enable

Enable NPU offloading.

disable

Disable NPU offloading.

peer

Accept this peer certificate.

string

Maximum length: 35

peergrp

Accept this peer certificate group.

string

Maximum length: 35

peerid

Accept this peer identity.

string

Maximum length: 255

peertype

Accept this peer type.

option

-

peer

Option

Description

any

Accept any peer ID.

one

Accept this peer ID.

dialup

Accept peer ID in dialup group.

peer

Accept this peer certificate.

peergrp

Accept this peer certificate group.

ppk

Enable/disable IKEv2 Postquantum Preshared Key (PPK).

option

-

disable

Option

Description

disable

Disable use of IKEv2 Postquantum Preshared Key (PPK).

allow

Allow, but do not require, use of IKEv2 Postquantum Preshared Key (PPK).

require

Require use of IKEv2 Postquantum Preshared Key (PPK).

ppk-identity

IKEv2 Postquantum Preshared Key Identity.

string

Maximum length: 35

ppk-secret

IKEv2 Postquantum Preshared Key (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

priority

Priority for routes added by IKE.

integer

Minimum value: 1 Maximum value: 65535

1

proposal

Phase1 proposal.

option

-

Option

Description

des-md5

des-md5

des-sha1

des-sha1

des-sha256

des-sha256

des-sha384

des-sha384

des-sha512

des-sha512

3des-md5

3des-md5

3des-sha1

3des-sha1

3des-sha256

3des-sha256

3des-sha384

3des-sha384

3des-sha512

3des-sha512

aes128-md5

aes128-md5

aes128-sha1

aes128-sha1

aes128-sha256

aes128-sha256

aes128-sha384

aes128-sha384

aes128-sha512

aes128-sha512

aes128gcm-prfsha1

aes128gcm-prfsha1

aes128gcm-prfsha256

aes128gcm-prfsha256

aes128gcm-prfsha384

aes128gcm-prfsha384

aes128gcm-prfsha512

aes128gcm-prfsha512

aes192-md5

aes192-md5

aes192-sha1

aes192-sha1

aes192-sha256

aes192-sha256

aes192-sha384

aes192-sha384

aes192-sha512

aes192-sha512

aes256-md5

aes256-md5

aes256-sha1

aes256-sha1

aes256-sha256

aes256-sha256

aes256-sha384

aes256-sha384

aes256-sha512

aes256-sha512

aes256gcm-prfsha1

aes256gcm-prfsha1

aes256gcm-prfsha256

aes256gcm-prfsha256

aes256gcm-prfsha384

aes256gcm-prfsha384

aes256gcm-prfsha512

aes256gcm-prfsha512

chacha20poly1305-prfsha1

chacha20poly1305-prfsha1

chacha20poly1305-prfsha256

chacha20poly1305-prfsha256

chacha20poly1305-prfsha384

chacha20poly1305-prfsha384

chacha20poly1305-prfsha512

chacha20poly1305-prfsha512

aria128-md5

aria128-md5

aria128-sha1

aria128-sha1

aria128-sha256

aria128-sha256

aria128-sha384

aria128-sha384

aria128-sha512

aria128-sha512

aria192-md5

aria192-md5

aria192-sha1

aria192-sha1

aria192-sha256

aria192-sha256

aria192-sha384

aria192-sha384

aria192-sha512

aria192-sha512

aria256-md5

aria256-md5

aria256-sha1

aria256-sha1

aria256-sha256

aria256-sha256

aria256-sha384

aria256-sha384

aria256-sha512

aria256-sha512

seed-md5

seed-md5

seed-sha1

seed-sha1

seed-sha256

seed-sha256

seed-sha384

seed-sha384

seed-sha512

seed-sha512

psksecret

Pre-shared secret for PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

psksecret-remote

Pre-shared secret for remote side PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

qkd

Enable/disable use of Quantum Key Distribution (QKD) server.

option

-

disable

Option

Description

disable

Disable use of a Quantum Key Distribution (QKD) server.

allow

Allow, but do not require, use of a Quantum Key Distribution (QKD) server.

require

Require use of a Quantum Key Distribution (QKD) server.

qkd-profile

Quantum Key Distribution (QKD) server profile.

string

Maximum length: 35

reauth

Enable/disable re-authentication upon IKE SA lifetime expiration.

option

-

disable

Option

Description

disable

Disable IKE SA re-authentication.

enable

Enable IKE SA re-authentication.

rekey

Enable/disable phase1 rekey.

option

-

enable

Option

Description

enable

Enable phase1 rekey.

disable

Disable phase1 rekey.

remote-gw

Remote VPN gateway.

ipv4-address

Not Specified

0.0.0.0

remote-gw-country

IPv4 addresses associated to a specific country.

string

Maximum length: 2

remote-gw-end-ip

Last IPv4 address in the range.

ipv4-address-any

Not Specified

0.0.0.0

remote-gw-match

Set type of IPv4 remote gateway address matching.

option

-

any

Option

Description

any

Match any IPv4 gateway address.

ipmask

Match IPv4 gateway address and mask.

iprange

Match IPv4 gateway address range.

geography

Match IPv4 gateway address from a specified country.

ztna

Match IPv4 gateway address against ZTNA posture tags.

remote-gw-start-ip

First IPv4 address in the range.

ipv4-address-any

Not Specified

0.0.0.0

remote-gw-subnet

IPv4 address and subnet mask.

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

remote-gw-ztna-tags <name>

IPv4 ZTNA posture tags.

Address name.

string

Maximum length: 79

remote-gw6-country

IPv6 addresses associated to a specific country.

string

Maximum length: 2

remote-gw6-end-ip

Last IPv6 address in the range.

ipv6-address

Not Specified

::

remote-gw6-match

Set type of IPv6 remote gateway address matching.

option

-

any

Option

Description

any

Match any IPv6 gateway address.

ipprefix

Match IPv6 gateway address and prefix.

iprange

Match IPv6 gateway address range.

geography

Match IPv6 gateway address from a specified country.

remote-gw6-start-ip

First IPv6 address in the range.

ipv6-address

Not Specified

::

remote-gw6-subnet

IPv6 address and prefix.

ipv6-network

Not Specified

::/0

remotegw-ddns

Domain name of remote gateway. For example, name.ddns.com.

string

Maximum length: 63

rsa-signature-format

Digital Signature Authentication RSA signature format.

option

-

pkcs1

Option

Description

pkcs1

RSASSA PKCS#1 v1.5.

pss

RSASSA Probabilistic Signature Scheme (PSS).

rsa-signature-hash-override

Enable/disable IKEv2 RSA signature hash algorithm override.

option

-

disable

Option

Description

enable

Enable IKEv2 RSA signature hash algorithm override.

disable

Disable IKEv2 RSA signature hash algorithm override.

save-password

Enable/disable saving XAuth username and password on VPN clients.

option

-

disable

Option

Description

disable

Disable saving XAuth username and password on VPN clients.

enable

Enable saving XAuth username and password on VPN clients.

send-cert-chain

Enable/disable sending certificate chain.

option

-

enable

Option

Description

enable

Enable sending certificate chain.

disable

Disable sending certificate chain.

shared-idle-timeout

Enable/disable IPsec tunnel shared idle timeout.

option

-

disable

Option

Description

enable

Enable IPsec tunnel shared idle timeout. The location-id attribute must be configured on both spokes. Shared idle timeout is supported only on IKEv2 since remote-location is availabe only for IKEv2.

disable

Disable IPsec tunnel shared idle timeout.

signature-hash-alg

Digital Signature Authentication hash algorithms.

option

-

sha2-512

Option

Description

sha1

SHA1.

sha2-256

SHA2-256.

sha2-384

SHA2-384.

sha2-512

SHA2-512.

split-include-service

Split-include services.

string

Maximum length: 79

suite-b

Use Suite-B.

option

-

disable

Option

Description

disable

Do not use UI suite.

suite-b-gcm-128

Use Suite-B-GCM-128.

suite-b-gcm-256

Use Suite-B-GCM-256.

transport

Set IKE transport protocol.

option

-

auto

Option

Description

udp

Use UDP transport for IKE.

auto

Use AUTO transport for IKE.

tcp

Use TCP transport for IKE.

type

Remote gateway type.

option

-

static

Option

Description

static

Remote VPN gateway has fixed IP address.

dynamic

Remote VPN gateway has dynamic IP address.

ddns

Remote VPN gateway has dynamic IP address and is a dynamic DNS client.

unity-support

Enable/disable support for Cisco UNITY Configuration Method extensions.

option

-

enable

Option

Description

disable

Disable Cisco Unity Configuration Method Extensions.

enable

Enable Cisco Unity Configuration Method Extensions.

usrgrp

User group name for dialup peers.

string

Maximum length: 35

wizard-type

GUI VPN Wizard Type.

option

-

custom

Option

Description

custom

Custom VPN configuration.

dialup-forticlient

Dial Up - FortiClient Windows, Mac and Android.

dialup-ios

Dial Up - iPhone / iPad Native IPsec Client.

dialup-android

Dial Up - Android Native IPsec Client.

dialup-windows

Dial Up - Windows Native IPsec Client.

dialup-cisco

Dial Up - Cisco IPsec Client.

static-fortigate

Site to Site - FortiGate.

dialup-fortigate

Dial Up - FortiGate.

static-cisco

Site to Site - Cisco.

dialup-cisco-fw

Dialup Up - Cisco Firewall.

simplified-static-fortigate

Site to Site - FortiGate (SD-WAN).

hub-fortigate-auto-discovery

Hub role in a Hub-and-Spoke auto-discovery VPN.

spoke-fortigate-auto-discovery

Spoke role in a Hub-and-Spoke auto-discovery VPN.

fabric-overlay-orchestrator

Fabric Overlay Orchestrator.

xauthtype

XAuth type.

option

-

disable

Option

Description

disable

Disable.

client

Enable as client.

pap

Enable as server PAP.

chap

Enable as server CHAP.

auto

Enable as server auto.

* This parameter may not exist in some models.

config ipv4-exclude-range

Parameter

Description

Type

Size

Default

end-ip

End of IPv4 exclusive range.

ipv4-address

Not Specified

0.0.0.0

id

ID.

integer

Minimum value: 0 Maximum value: 4294967295

0

start-ip

Start of IPv4 exclusive range.

ipv4-address

Not Specified

0.0.0.0

config ipv6-exclude-range

Parameter

Description

Type

Size

Default

end-ip

End of IPv6 exclusive range.

ipv6-address

Not Specified

::

id

ID.

integer

Minimum value: 0 Maximum value: 4294967295

0

start-ip

Start of IPv6 exclusive range.

ipv6-address

Not Specified

::

config vpn ipsec phase1

config vpn ipsec phase1

Configure VPN remote gateway.

config vpn ipsec phase1
    Description: Configure VPN remote gateway.
    edit <name>
        set acct-verify [enable|disable]
        set add-gw-route [enable|disable]
        set add-route [disable|enable]
        set addke1 {option1}, {option2}, ...
        set addke2 {option1}, {option2}, ...
        set addke3 {option1}, {option2}, ...
        set addke4 {option1}, {option2}, ...
        set addke5 {option1}, {option2}, ...
        set addke6 {option1}, {option2}, ...
        set addke7 {option1}, {option2}, ...
        set assign-ip [disable|enable]
        set assign-ip-from [range|usrgrp|...]
        set authmethod [psk|signature]
        set authmethod-remote [psk|signature]
        set authpasswd {password}
        set authusr {string}
        set authusrgrp {string}
        set auto-negotiate [enable|disable]
        set auto-transport-threshold {integer}
        set azure-ad-autoconnect [enable|disable]
        set backup-gateway <address1>, <address2>, ...
        set banner {var-string}
        set cert-id-validation [enable|disable]
        set cert-peer-username-strip [disable|enable]
        set cert-peer-username-validation [none|othername|...]
        set cert-trust-store [local|ems]
        set certificate <name1>, <name2>, ...
        set childless-ike [enable|disable]
        set client-auto-negotiate [disable|enable]
        set client-keep-alive [disable|enable]
        set client-resume [enable|disable]
        set client-resume-interval {integer}
        set comments {var-string}
        set dev-id {string}
        set dev-id-notification [disable|enable]
        set dhcp-ra-giaddr {ipv4-address}
        set dhcp6-ra-linkaddr {ipv6-address}
        set dhgrp {option1}, {option2}, ...
        set digital-signature-auth [enable|disable]
        set distance {integer}
        set dns-mode [manual|auto]
        set domain {string}
        set dpd [disable|on-idle|...]
        set dpd-retrycount {integer}
        set dpd-retryinterval {user}
        set eap [enable|disable]
        set eap-cert-auth [enable|disable]
        set eap-exclude-peergrp {string}
        set eap-identity [use-id-payload|send-request]
        set ems-sn-check [enable|disable]
        set enforce-unique-id [disable|keep-new|...]
        set esn [require|allow|...]
        set exchange-fgt-device-id [enable|disable]
        set fec-base {integer}
        set fec-codec [rs|xor]
        set fec-egress [enable|disable]
        set fec-health-check {string}
        set fec-ingress [enable|disable]
        set fec-mapping-profile {string}
        set fec-receive-timeout {integer}
        set fec-redundant {integer}
        set fec-send-timeout {integer}
        set fgsp-sync [enable|disable]
        set fortinet-esp [enable|disable]
        set fragmentation [enable|disable]
        set fragmentation-mtu {integer}
        set group-authentication [enable|disable]
        set group-authentication-secret {password-3}
        set ha-sync-esp-seqno [enable|disable]
        set idle-timeout [enable|disable]
        set idle-timeoutinterval {integer}
        set ike-version [1|2]
        set inbound-dscp-copy [enable|disable]
        set include-local-lan [disable|enable]
        set interface {string}
        set internal-domain-list <domain-name1>, <domain-name2>, ...
        set ip-delay-interval {integer}
        set ipv4-dns-server1 {ipv4-address}
        set ipv4-dns-server2 {ipv4-address}
        set ipv4-dns-server3 {ipv4-address}
        set ipv4-end-ip {ipv4-address}
        config ipv4-exclude-range
            Description: Configuration Method IPv4 exclude ranges.
            edit <id>
                set end-ip {ipv4-address}
                set start-ip {ipv4-address}
            next
        end
        set ipv4-name {string}
        set ipv4-netmask {ipv4-netmask}
        set ipv4-split-exclude {string}
        set ipv4-split-include {string}
        set ipv4-start-ip {ipv4-address}
        set ipv4-wins-server1 {ipv4-address}
        set ipv4-wins-server2 {ipv4-address}
        set ipv6-auto-linklocal [enable|disable]
        set ipv6-dns-server1 {ipv6-address}
        set ipv6-dns-server2 {ipv6-address}
        set ipv6-dns-server3 {ipv6-address}
        set ipv6-end-ip {ipv6-address}
        config ipv6-exclude-range
            Description: Configuration method IPv6 exclude ranges.
            edit <id>
                set end-ip {ipv6-address}
                set start-ip {ipv6-address}
            next
        end
        set ipv6-name {string}
        set ipv6-prefix {integer}
        set ipv6-split-exclude {string}
        set ipv6-split-include {string}
        set ipv6-start-ip {ipv6-address}
        set keepalive {integer}
        set keylife {integer}
        set kms {string}
        set link-cost {integer}
        set local-gw {ipv4-address}
        set localid {string}
        set localid-type [auto|fqdn|...]
        set loopback-asymroute [enable|disable]
        set mesh-selector-type [disable|subnet|...]
        set mode [aggressive|main]
        set mode-cfg [disable|enable]
        set mode-cfg-allow-client-selector [disable|enable]
        set nattraversal [enable|disable|...]
        set negotiate-timeout {integer}
        set network-id {integer}
        set network-overlay [disable|enable]
        set npu-offload [enable|disable]
        set peer {string}
        set peergrp {string}
        set peerid {string}
        set peertype [any|one|...]
        set ppk [disable|allow|...]
        set ppk-identity {string}
        set ppk-secret {password-3}
        set priority {integer}
        set proposal {option1}, {option2}, ...
        set psksecret {password-3}
        set psksecret-remote {password-3}
        set qkd [disable|allow|...]
        set qkd-profile {string}
        set reauth [disable|enable]
        set rekey [enable|disable]
        set remote-gw {ipv4-address}
        set remote-gw-country {string}
        set remote-gw-end-ip {ipv4-address-any}
        set remote-gw-match [any|ipmask|...]
        set remote-gw-start-ip {ipv4-address-any}
        set remote-gw-subnet {ipv4-classnet-any}
        set remote-gw-ztna-tags <name1>, <name2>, ...
        set remote-gw6-country {string}
        set remote-gw6-end-ip {ipv6-address}
        set remote-gw6-match [any|ipprefix|...]
        set remote-gw6-start-ip {ipv6-address}
        set remote-gw6-subnet {ipv6-network}
        set remotegw-ddns {string}
        set rsa-signature-format [pkcs1|pss]
        set rsa-signature-hash-override [enable|disable]
        set save-password [disable|enable]
        set send-cert-chain [enable|disable]
        set shared-idle-timeout [enable|disable]
        set signature-hash-alg {option1}, {option2}, ...
        set split-include-service {string}
        set suite-b [disable|suite-b-gcm-128|...]
        set transport [udp|auto|...]
        set type [static|dynamic|...]
        set unity-support [disable|enable]
        set usrgrp {string}
        set wizard-type [custom|dialup-forticlient|...]
        set xauthtype [disable|client|...]
    next
end

config vpn ipsec phase1

Parameter

Description

Type

Size

Default

acct-verify

Enable/disable verification of RADIUS accounting record.

option

-

disable

Option

Description

enable

Enable verification of RADIUS accounting record.

disable

Disable verification of RADIUS accounting record.

add-gw-route

Enable/disable automatically add a route to the remote gateway.

option

-

disable

Option

Description

enable

Automatically add a route to the remote gateway.

disable

Do not automatically add a route to the remote gateway.

add-route

Enable/disable control addition of a route to peer destination selector.

option

-

disable

Option

Description

disable

Do not add a route to destination of peer selector.

enable

Add route to destination of peer selector.

addke1

ADDKE1 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke2

ADDKE2 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke3

ADDKE3 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke4

ADDKE4 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke5

ADDKE5 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke6

ADDKE6 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

addke7

ADDKE7 group.

option

-

Option

Description

0

NONE.

35

ML-KEM-512.

36

ML-KEM-768.

37

ML-KEM-1024.

1080

KYBER512.

1081

KYBER768.

1082

KYBER1024.

1083

FRODO L1.

1084

FRODO L3.

1085

FRODO L5.

1089

BIKE L1.

1090

BIKE L3.

1091

BIKE L5.

1092

HQC128.

1093

HQC192.

1094

HQC256.

assign-ip

Enable/disable assignment of IP to IPsec interface via configuration method.

option

-

enable

Option

Description

disable

Do not assign an IP address to the IPsec interface.

enable

Assign an IP address to the IPsec interface.

assign-ip-from

Method by which the IP address will be assigned.

option

-

range

Option

Description

range

Assign IP address from locally defined range.

usrgrp

Assign IP address via user group.

dhcp

Assign IP address via DHCP.

name

Assign IP address from firewall address or group.

authmethod

Authentication method.

option

-

psk

Option

Description

psk

PSK authentication method.

signature

Signature authentication method.

authmethod-remote

Authentication method (remote side).

option

-

Option

Description

psk

PSK authentication method.

signature

Signature authentication method.

authpasswd

XAuth password (max 35 characters).

password

Not Specified

authusr

XAuth user name.

string

Maximum length: 64

authusrgrp

Authentication user group.

string

Maximum length: 35

auto-negotiate

Enable/disable automatic initiation of IKE SA negotiation.

option

-

enable

Option

Description

enable

Enable automatic initiation of IKE SA negotiation.

disable

Disable automatic initiation of IKE SA negotiation.

auto-transport-threshold

Timeout in seconds before falling back to next transport protocol.

integer

Minimum value: 1 Maximum value: 300

15

azure-ad-autoconnect

Enable/disable Azure AD Auto-Connect for FortiClient.

option

-

disable

Option

Description

enable

Enable Azure AD Auto-Connect for FortiClient.

disable

Disable Azure AD Auto-Connect for FortiClient.

backup-gateway <address>

Instruct unity clients about the backup gateway address(es).

Address of backup gateway.

string

Maximum length: 79

banner

Message that unity client should display after connecting.

var-string

Maximum length: 1024

cert-id-validation

Enable/disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

option

-

enable

Option

Description

enable

Enable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

disable

Disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945.

cert-peer-username-strip

Enable/disable domain stripping on certificate identity.

option

-

disable

Option

Description

disable

Disable domain stripping on certificate identity.

enable

Enable domain stripping on certificate identity.

cert-peer-username-validation

Enable/disable cross validation of peer username and the identity in the peer's certificate.

option

-

none

Option

Description

none

Disable cross validation of peer username and the identity in the peer's certificate.

othername

Validate principal name in SAN othername.

rfc822name

Validate RFC822 email address in SAN.

cn

Validate CN in subject.

cert-trust-store

CA certificate trust store.

option

-

local

Option

Description

local

Use local CA certificate.

ems

Use EMS CA certificate.

certificate <name>

Names of up to 4 signed personal certificates.

Certificate name.

string

Maximum length: 79

childless-ike

Enable/disable childless IKEv2 initiation (RFC 6023).

option

-

disable

Option

Description

enable

Enable childless IKEv2 initiation (RFC 6023).

disable

Disable childless IKEv2 initiation (RFC 6023).

client-auto-negotiate

Enable/disable allowing the VPN client to bring up the tunnel when there is no traffic.

option

-

disable

Option

Description

disable

Disable allowing the VPN client to bring up the tunnel when there is no traffic.

enable

Enable allowing the VPN client to bring up the tunnel when there is no traffic.

client-keep-alive

Enable/disable allowing the VPN client to keep the tunnel up when there is no traffic.

option

-

disable

Option

Description

disable

Disable allowing the VPN client to keep the tunnel up when there is no traffic.

enable

Enable allowing the VPN client to keep the tunnel up when there is no traffic.

client-resume

Enable/disable resumption of offline FortiClient sessions. When a FortiClient enabled laptop is closed or enters sleep/hibernate mode, enabling this feature allows FortiClient to keep the tunnel during this period, and allows users to immediately resume using the IPsec tunnel when the device wakes up.

option

-

disable

Option

Description

enable

Enable client session resumption.

disable

Disable client session resumption.

client-resume-interval

Maximum time in seconds during which a VPN client may resume using a tunnel after a client PC has entered sleep mode or temporarily lost its network connection.

integer

Minimum value: 120 Maximum value: 172800

7200

comments

Comment.

var-string

Maximum length: 255

dev-id

Device ID carried by the device ID notification.

string

Maximum length: 63

dev-id-notification

Enable/disable device ID notification.

option

-

disable

Option

Description

disable

Disable device ID notification.

enable

Enable device ID notification.

dhcp-ra-giaddr

Relay agent gateway IP address to use in the giaddr field of DHCP requests.

ipv4-address

Not Specified

0.0.0.0

dhcp6-ra-linkaddr

Relay agent IPv6 link address to use in DHCP6 requests.

ipv6-address

Not Specified

::

dhgrp

DH group.

option

-

14

Option

Description

1

DH Group 1.

2

DH Group 2.

5

DH Group 5.

14

DH Group 14.

15

DH Group 15.

16

DH Group 16.

17

DH Group 17.

18

DH Group 18.

19

DH Group 19.

20

DH Group 20.

21

DH Group 21.

27

DH Group 27.

28

DH Group 28.

29

DH Group 29.

30

DH Group 30.

31

DH Group 31.

32

DH Group 32.

digital-signature-auth

Enable/disable IKEv2 Digital Signature Authentication (RFC 7427).

option

-

disable

Option

Description

enable

Enable IKEv2 Digital Signature Authentication (RFC 7427).

disable

Disable IKEv2 Digital Signature Authentication (RFC 7427).

distance

Distance for routes added by IKE.

integer

Minimum value: 1 Maximum value: 255

15

dns-mode

DNS server mode.

option

-

manual

Option

Description

manual

Manually configure DNS servers.

auto

Use default DNS servers.

domain

Instruct unity clients about the single default DNS domain.

string

Maximum length: 63

dpd

Dead Peer Detection mode.

option

-

on-demand

Option

Description

disable

Disable Dead Peer Detection.

on-idle

Trigger Dead Peer Detection when IPsec is idle.

on-demand

Trigger Dead Peer Detection when IPsec traffic is sent but no reply is received from the peer.

dpd-retrycount

Number of DPD retry attempts.

integer

Minimum value: 0 Maximum value: 10

3

dpd-retryinterval

DPD retry interval.

user

Not Specified

eap

Enable/disable IKEv2 EAP authentication.

option

-

disable

Option

Description

enable

Enable IKEv2 EAP authentication.

disable

Disable IKEv2 EAP authentication.

eap-cert-auth

Enable/disable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

option

-

disable

Option

Description

enable

Enable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

disable

Disable peer certificate authentication in addition to EAP if peer is a FortiClient endpoint.

eap-exclude-peergrp

Peer group excluded from EAP authentication.

string

Maximum length: 35

eap-identity

IKEv2 EAP peer identity type.

option

-

use-id-payload

Option

Description

use-id-payload

Use IKEv2 IDi payload to resolve peer identity.

send-request

Use EAP identity request to resolve peer identity.

ems-sn-check

Enable/disable verification of EMS serial number.

option

-

disable

Option

Description

enable

Enable EMS serial number verification.

disable

Disable EMS serial number verification.

enforce-unique-id

Enable/disable peer ID uniqueness check.

option

-

disable

Option

Description

disable

Disable peer ID uniqueness enforcement.

keep-new

Enforce peer ID uniqueness, keep new connection if collision found.

keep-old

Enforce peer ID uniqueness, keep old connection if collision found.

esn *

Extended sequence number (ESN) negotiation.

option

-

disable

Option

Description

require

Require extended sequence number.

allow

Allow extended sequence number.

disable

Disable extended sequence number.

exchange-fgt-device-id

Enable/disable device identifier exchange with peer FortiGate units for use of VPN monitor data by FortiManager.

option

-

disable

Option

Description

enable

Enable exchange of FortiGate device identifier.

disable

Disable exchange of FortiGate device identifier.

fec-base

Number of base Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 20

10

fec-codec

Forward Error Correction encoding/decoding algorithm.

option

-

rs

Option

Description

rs

Reed-Solomon FEC algorithm.

xor

XOR FEC algorithm.

fec-egress

Enable/disable Forward Error Correction for egress IPsec traffic.

option

-

disable

Option

Description

enable

Enable Forward Error Correction for egress IPsec traffic.

disable

Disable Forward Error Correction for egress IPsec traffic.

fec-health-check

SD-WAN health check.

string

Maximum length: 35

fec-ingress

Enable/disable Forward Error Correction for ingress IPsec traffic.

option

-

disable

Option

Description

enable

Enable Forward Error Correction for ingress IPsec traffic.

disable

Disable Forward Error Correction for ingress IPsec traffic.

fec-mapping-profile

Forward Error Correction (FEC) mapping profile.

string

Maximum length: 35

fec-receive-timeout

Timeout in milliseconds before dropping Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 1000

50

fec-redundant

Number of redundant Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 5

1

fec-send-timeout

Timeout in milliseconds before sending Forward Error Correction packets.

integer

Minimum value: 1 Maximum value: 1000

5

fgsp-sync

Enable/disable IPsec syncing of tunnels for FGSP IPsec.

option

-

disable

Option

Description

enable

Enable IPsec syncing of tunnels to other cluster members.

disable

Disable IPsec syncing of tunnels to other cluster members.

fortinet-esp

Enable/disable Fortinet ESP encapsulaton.

option

-

disable

Option

Description

enable

Enable Fortinet ESP encapsulation.

disable

Disable Fortinet ESP encapsulaton.

fragmentation

Enable/disable fragment IKE message on re-transmission.

option

-

enable

Option

Description

enable

Enable intra-IKE fragmentation support on re-transmission.

disable

Disable intra-IKE fragmentation support.

fragmentation-mtu

IKE fragmentation MTU.

integer

Minimum value: 500 Maximum value: 16000

1200

group-authentication

Enable/disable IKEv2 IDi group authentication.

option

-

disable

Option

Description

enable

Enable IKEv2 IDi group authentication.

disable

Disable IKEv2 IDi group authentication.

group-authentication-secret

Password for IKEv2 ID group authentication. ASCII string or hexadecimal indicated by a leading 0x.

password-3

Not Specified

ha-sync-esp-seqno

Enable/disable sequence number jump ahead for IPsec HA.

option

-

enable

Option

Description

enable

Enable HA syncing of ESP sequence numbers.

disable

Disable HA syncing of ESP sequence numbers.

idle-timeout

Enable/disable IPsec tunnel idle timeout.

option

-

disable

Option

Description

enable

Enable IPsec tunnel idle timeout.

disable

Disable IPsec tunnel idle timeout.

idle-timeoutinterval

IPsec tunnel idle timeout in minutes.

integer

Minimum value: 5 Maximum value: 43200

15

ike-version

IKE protocol version.

option

-

1

Option

Description

1

Use IKEv1 protocol.

2

Use IKEv2 protocol.

inbound-dscp-copy

Enable/disable copy the dscp in the ESP header to the inner IP Header.

option

-

disable

Option

Description

enable

Enable copy the dscp in the ESP header to the inner IP Header.

disable

Disable copy the dscp in the ESP header to the inner IP Header.

include-local-lan

Enable/disable allow local LAN access on unity clients.

option

-

disable

Option

Description

disable

Disable local LAN access on Unity clients.

enable

Enable local LAN access on Unity clients.

interface

Local physical, aggregate, or VLAN outgoing interface.

string

Maximum length: 35

internal-domain-list <domain-name>

One or more internal domain names in quotes separated by spaces.

Domain name.

string

Maximum length: 79

ip-delay-interval

IP address reuse delay interval in seconds.

integer

Minimum value: 0 Maximum value: 28800

0

ipv4-dns-server1

IPv4 DNS server 1.

ipv4-address

Not Specified

0.0.0.0

ipv4-dns-server2

IPv4 DNS server 2.

ipv4-address

Not Specified

0.0.0.0

ipv4-dns-server3

IPv4 DNS server 3.

ipv4-address

Not Specified

0.0.0.0

ipv4-end-ip

End of IPv4 range.

ipv4-address

Not Specified

0.0.0.0

ipv4-name

IPv4 address name.

string

Maximum length: 79

ipv4-netmask

IPv4 Netmask.

ipv4-netmask

Not Specified

255.255.255.255

ipv4-split-exclude

IPv4 subnets that should not be sent over the IPsec tunnel.

string

Maximum length: 79

ipv4-split-include

IPv4 split-include subnets.

string

Maximum length: 79

ipv4-start-ip

Start of IPv4 range.

ipv4-address

Not Specified

0.0.0.0

ipv4-wins-server1

WINS server 1.

ipv4-address

Not Specified

0.0.0.0

ipv4-wins-server2

WINS server 2.

ipv4-address

Not Specified

0.0.0.0

ipv6-auto-linklocal

Enable/disable auto generation of IPv6 link-local address using last 8 bytes of mode-cfg assigned IPv6 address.

option

-

disable

Option

Description

enable

Enable mode-cfg auto configuration of IPv6 link-local address.

disable

Disable mode-cfg auto configuration of IPv6 link-local address.

ipv6-dns-server1

IPv6 DNS server 1.

ipv6-address

Not Specified

::

ipv6-dns-server2

IPv6 DNS server 2.

ipv6-address

Not Specified

::

ipv6-dns-server3

IPv6 DNS server 3.

ipv6-address

Not Specified

::

ipv6-end-ip

End of IPv6 range.

ipv6-address

Not Specified

::

ipv6-name

IPv6 address name.

string

Maximum length: 79

ipv6-prefix

IPv6 prefix.

integer

Minimum value: 1 Maximum value: 128

128

ipv6-split-exclude

IPv6 subnets that should not be sent over the IPsec tunnel.

string

Maximum length: 79

ipv6-split-include

IPv6 split-include subnets.

string

Maximum length: 79

ipv6-start-ip

Start of IPv6 range.

ipv6-address

Not Specified

::

keepalive

NAT-T keep alive interval.

integer

Minimum value: 5 Maximum value: 900

10

keylife

Time to wait in seconds before phase 1 encryption key expires.

integer

Minimum value: 120 Maximum value: 172800

86400

kms

Key Management Services server.

string

Maximum length: 35

link-cost

VPN tunnel underlay link cost.

integer

Minimum value: 0 Maximum value: 255

0

local-gw

Local VPN gateway.

ipv4-address

Not Specified

0.0.0.0

localid

Local ID.

string

Maximum length: 63

localid-type

Local ID type.

option

-

auto

Option

Description

auto

Select ID type automatically.

fqdn

Use fully qualified domain name.

user-fqdn

Use user fully qualified domain name.

keyid

Use key-id string.

address

Use local IP address.

asn1dn

Use ASN.1 distinguished name.

loopback-asymroute

Enable/disable asymmetric routing for IKE traffic on loopback interface.

option

-

enable

Option

Description

enable

Allow ingress/egress IKE traffic to be routed over different interfaces.

disable

Ingress/egress IKE traffic must be routed over the same interface.

mesh-selector-type

Add selectors containing subsets of the configuration depending on traffic.

option

-

disable

Option

Description

disable

Disable.

subnet

Enable addition of matching subnet selector.

host

Enable addition of host to host selector.

mode

ID protection mode used to establish a secure channel.

option

-

main

Option

Description

aggressive

Aggressive mode.

main

Main mode.

mode-cfg

Enable/disable configuration method.

option

-

disable

Option

Description

disable

Disable Configuration Method.

enable

Enable Configuration Method.

mode-cfg-allow-client-selector

Enable/disable mode-cfg client to use custom phase2 selectors.

option

-

disable

Option

Description

disable

Mode-cfg client to use wildcard selectors.

enable

Mode-cfg client to use custom selectors.

name

IPsec remote gateway name.

string

Maximum length: 35

nattraversal

Enable/disable NAT traversal.

option

-

enable

Option

Description

enable

Enable IPsec NAT traversal.

disable

Disable IPsec NAT traversal.

forced

Force IPsec NAT traversal on.

negotiate-timeout

IKE SA negotiation timeout in seconds.

integer

Minimum value: 1 Maximum value: 300

30

network-id

VPN gateway network ID.

integer

Minimum value: 0 Maximum value: 255

0

network-overlay

Enable/disable network overlays.

option

-

disable

Option

Description

disable

Disable network overlays.

enable

Enable network overlays.

npu-offload *

Enable/disable offloading NPU.

option

-

enable

Option

Description

enable

Enable NPU offloading.

disable

Disable NPU offloading.

peer

Accept this peer certificate.

string

Maximum length: 35

peergrp

Accept this peer certificate group.

string

Maximum length: 35

peerid

Accept this peer identity.

string

Maximum length: 255

peertype

Accept this peer type.

option

-

peer

Option

Description

any

Accept any peer ID.

one

Accept this peer ID.

dialup

Accept peer ID in dialup group.

peer

Accept this peer certificate.

peergrp

Accept this peer certificate group.

ppk

Enable/disable IKEv2 Postquantum Preshared Key (PPK).

option

-

disable

Option

Description

disable

Disable use of IKEv2 Postquantum Preshared Key (PPK).

allow

Allow, but do not require, use of IKEv2 Postquantum Preshared Key (PPK).

require

Require use of IKEv2 Postquantum Preshared Key (PPK).

ppk-identity

IKEv2 Postquantum Preshared Key Identity.

string

Maximum length: 35

ppk-secret

IKEv2 Postquantum Preshared Key (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

priority

Priority for routes added by IKE.

integer

Minimum value: 1 Maximum value: 65535

1

proposal

Phase1 proposal.

option

-

Option

Description

des-md5

des-md5

des-sha1

des-sha1

des-sha256

des-sha256

des-sha384

des-sha384

des-sha512

des-sha512

3des-md5

3des-md5

3des-sha1

3des-sha1

3des-sha256

3des-sha256

3des-sha384

3des-sha384

3des-sha512

3des-sha512

aes128-md5

aes128-md5

aes128-sha1

aes128-sha1

aes128-sha256

aes128-sha256

aes128-sha384

aes128-sha384

aes128-sha512

aes128-sha512

aes128gcm-prfsha1

aes128gcm-prfsha1

aes128gcm-prfsha256

aes128gcm-prfsha256

aes128gcm-prfsha384

aes128gcm-prfsha384

aes128gcm-prfsha512

aes128gcm-prfsha512

aes192-md5

aes192-md5

aes192-sha1

aes192-sha1

aes192-sha256

aes192-sha256

aes192-sha384

aes192-sha384

aes192-sha512

aes192-sha512

aes256-md5

aes256-md5

aes256-sha1

aes256-sha1

aes256-sha256

aes256-sha256

aes256-sha384

aes256-sha384

aes256-sha512

aes256-sha512

aes256gcm-prfsha1

aes256gcm-prfsha1

aes256gcm-prfsha256

aes256gcm-prfsha256

aes256gcm-prfsha384

aes256gcm-prfsha384

aes256gcm-prfsha512

aes256gcm-prfsha512

chacha20poly1305-prfsha1

chacha20poly1305-prfsha1

chacha20poly1305-prfsha256

chacha20poly1305-prfsha256

chacha20poly1305-prfsha384

chacha20poly1305-prfsha384

chacha20poly1305-prfsha512

chacha20poly1305-prfsha512

aria128-md5

aria128-md5

aria128-sha1

aria128-sha1

aria128-sha256

aria128-sha256

aria128-sha384

aria128-sha384

aria128-sha512

aria128-sha512

aria192-md5

aria192-md5

aria192-sha1

aria192-sha1

aria192-sha256

aria192-sha256

aria192-sha384

aria192-sha384

aria192-sha512

aria192-sha512

aria256-md5

aria256-md5

aria256-sha1

aria256-sha1

aria256-sha256

aria256-sha256

aria256-sha384

aria256-sha384

aria256-sha512

aria256-sha512

seed-md5

seed-md5

seed-sha1

seed-sha1

seed-sha256

seed-sha256

seed-sha384

seed-sha384

seed-sha512

seed-sha512

psksecret

Pre-shared secret for PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

psksecret-remote

Pre-shared secret for remote side PSK authentication (ASCII string or hexadecimal encoded with a leading 0x).

password-3

Not Specified

qkd

Enable/disable use of Quantum Key Distribution (QKD) server.

option

-

disable

Option

Description

disable

Disable use of a Quantum Key Distribution (QKD) server.

allow

Allow, but do not require, use of a Quantum Key Distribution (QKD) server.

require

Require use of a Quantum Key Distribution (QKD) server.

qkd-profile

Quantum Key Distribution (QKD) server profile.

string

Maximum length: 35

reauth

Enable/disable re-authentication upon IKE SA lifetime expiration.

option

-

disable

Option

Description

disable

Disable IKE SA re-authentication.

enable

Enable IKE SA re-authentication.

rekey

Enable/disable phase1 rekey.

option

-

enable

Option

Description

enable

Enable phase1 rekey.

disable

Disable phase1 rekey.

remote-gw

Remote VPN gateway.

ipv4-address

Not Specified

0.0.0.0

remote-gw-country

IPv4 addresses associated to a specific country.

string

Maximum length: 2

remote-gw-end-ip

Last IPv4 address in the range.

ipv4-address-any

Not Specified

0.0.0.0

remote-gw-match

Set type of IPv4 remote gateway address matching.

option

-

any

Option

Description

any

Match any IPv4 gateway address.

ipmask

Match IPv4 gateway address and mask.

iprange

Match IPv4 gateway address range.

geography

Match IPv4 gateway address from a specified country.

ztna

Match IPv4 gateway address against ZTNA posture tags.

remote-gw-start-ip

First IPv4 address in the range.

ipv4-address-any

Not Specified

0.0.0.0

remote-gw-subnet

IPv4 address and subnet mask.

ipv4-classnet-any

Not Specified

0.0.0.0 0.0.0.0

remote-gw-ztna-tags <name>

IPv4 ZTNA posture tags.

Address name.

string

Maximum length: 79

remote-gw6-country

IPv6 addresses associated to a specific country.

string

Maximum length: 2

remote-gw6-end-ip

Last IPv6 address in the range.

ipv6-address

Not Specified

::

remote-gw6-match

Set type of IPv6 remote gateway address matching.

option

-

any

Option

Description

any

Match any IPv6 gateway address.

ipprefix

Match IPv6 gateway address and prefix.

iprange

Match IPv6 gateway address range.

geography

Match IPv6 gateway address from a specified country.

remote-gw6-start-ip

First IPv6 address in the range.

ipv6-address

Not Specified

::

remote-gw6-subnet

IPv6 address and prefix.

ipv6-network

Not Specified

::/0

remotegw-ddns

Domain name of remote gateway. For example, name.ddns.com.

string

Maximum length: 63

rsa-signature-format

Digital Signature Authentication RSA signature format.

option

-

pkcs1

Option

Description

pkcs1

RSASSA PKCS#1 v1.5.

pss

RSASSA Probabilistic Signature Scheme (PSS).

rsa-signature-hash-override

Enable/disable IKEv2 RSA signature hash algorithm override.

option

-

disable

Option

Description

enable

Enable IKEv2 RSA signature hash algorithm override.

disable

Disable IKEv2 RSA signature hash algorithm override.

save-password

Enable/disable saving XAuth username and password on VPN clients.

option

-

disable

Option

Description

disable

Disable saving XAuth username and password on VPN clients.

enable

Enable saving XAuth username and password on VPN clients.

send-cert-chain

Enable/disable sending certificate chain.

option

-

enable

Option

Description

enable

Enable sending certificate chain.

disable

Disable sending certificate chain.

shared-idle-timeout

Enable/disable IPsec tunnel shared idle timeout.

option

-

disable

Option

Description

enable

Enable IPsec tunnel shared idle timeout. The location-id attribute must be configured on both spokes. Shared idle timeout is supported only on IKEv2 since remote-location is availabe only for IKEv2.

disable

Disable IPsec tunnel shared idle timeout.

signature-hash-alg

Digital Signature Authentication hash algorithms.

option

-

sha2-512

Option

Description

sha1

SHA1.

sha2-256

SHA2-256.

sha2-384

SHA2-384.

sha2-512

SHA2-512.

split-include-service

Split-include services.

string

Maximum length: 79

suite-b

Use Suite-B.

option

-

disable

Option

Description

disable

Do not use UI suite.

suite-b-gcm-128

Use Suite-B-GCM-128.

suite-b-gcm-256

Use Suite-B-GCM-256.

transport

Set IKE transport protocol.

option

-

auto

Option

Description

udp

Use UDP transport for IKE.

auto

Use AUTO transport for IKE.

tcp

Use TCP transport for IKE.

type

Remote gateway type.

option

-

static

Option

Description

static

Remote VPN gateway has fixed IP address.

dynamic

Remote VPN gateway has dynamic IP address.

ddns

Remote VPN gateway has dynamic IP address and is a dynamic DNS client.

unity-support

Enable/disable support for Cisco UNITY Configuration Method extensions.

option

-

enable

Option

Description

disable

Disable Cisco Unity Configuration Method Extensions.

enable

Enable Cisco Unity Configuration Method Extensions.

usrgrp

User group name for dialup peers.

string

Maximum length: 35

wizard-type

GUI VPN Wizard Type.

option

-

custom

Option

Description

custom

Custom VPN configuration.

dialup-forticlient

Dial Up - FortiClient Windows, Mac and Android.

dialup-ios

Dial Up - iPhone / iPad Native IPsec Client.

dialup-android

Dial Up - Android Native IPsec Client.

dialup-windows

Dial Up - Windows Native IPsec Client.

dialup-cisco

Dial Up - Cisco IPsec Client.

static-fortigate

Site to Site - FortiGate.

dialup-fortigate

Dial Up - FortiGate.

static-cisco

Site to Site - Cisco.

dialup-cisco-fw

Dialup Up - Cisco Firewall.

simplified-static-fortigate

Site to Site - FortiGate (SD-WAN).

hub-fortigate-auto-discovery

Hub role in a Hub-and-Spoke auto-discovery VPN.

spoke-fortigate-auto-discovery

Spoke role in a Hub-and-Spoke auto-discovery VPN.

fabric-overlay-orchestrator

Fabric Overlay Orchestrator.

xauthtype

XAuth type.

option

-

disable

Option

Description

disable

Disable.

client

Enable as client.

pap

Enable as server PAP.

chap

Enable as server CHAP.

auto

Enable as server auto.

* This parameter may not exist in some models.

config ipv4-exclude-range

Parameter

Description

Type

Size

Default

end-ip

End of IPv4 exclusive range.

ipv4-address

Not Specified

0.0.0.0

id

ID.

integer

Minimum value: 0 Maximum value: 4294967295

0

start-ip

Start of IPv4 exclusive range.

ipv4-address

Not Specified

0.0.0.0

config ipv6-exclude-range

Parameter

Description

Type

Size

Default

end-ip

End of IPv6 exclusive range.

ipv6-address

Not Specified

::

id

ID.

integer

Minimum value: 0 Maximum value: 4294967295

0

start-ip

Start of IPv6 exclusive range.

ipv6-address

Not Specified

::