config switch-controller snmp-community

Configure FortiSwitch SNMP v1/v2c communities globally.

config switch-controller snmp-community
    Description: Configure FortiSwitch SNMP v1/v2c communities globally.
    edit <id>
        set events {option1}, {option2}, ...
        config hosts
            Description: Configure IPv4 SNMP managers (hosts).
            edit <id>
                set ip {user}
            next
        end
        set name {string}
        set query-v1-port {integer}
        set query-v1-status [disable|enable]
        set query-v2c-port {integer}
        set query-v2c-status [disable|enable]
        set status [disable|enable]
        set trap-v1-lport {integer}
        set trap-v1-rport {integer}
        set trap-v1-status [disable|enable]
        set trap-v2c-lport {integer}
        set trap-v2c-rport {integer}
        set trap-v2c-status [disable|enable]
    next
end

config switch-controller snmp-community

Parameter

Description

Type

Size

Default

events

SNMP notifications (traps) to send.

option

cpu-high mem-low log-full intf-ip ent-conf-change l2mac

Option	Description
cpu-high	Send a trap when CPU usage too high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).
l2mac	Send a trap for Learning event (add/delete/movefrom/moveto).

SNMP community ID.

integer

Minimum value: 0 Maximum value: 4294967295

name

SNMP community name.

string

Maximum length: 35

query-v1-port

SNMP v1 query port (default = 161).

integer

Minimum value: 0 Maximum value: 65535

161

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
disable	Disable SNMP v1 queries.
enable	Enable SNMP v1 queries.

query-v2c-port

SNMP v2c query port (default = 161).

integer

Minimum value: 0 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
disable	Disable SNMP v2c queries.
enable	Enable SNMP v2c queries.

status

Enable/disable this SNMP community.

option

enable

Option	Description
disable	Disable SNMP community.
enable	Enable SNMP community.

trap-v1-lport

SNMP v2c trap local port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-rport

SNMP v2c trap remote port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
disable	Disable SNMP v1 traps.
enable	Enable SNMP v1 traps.

trap-v2c-lport

SNMP v2c trap local port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
disable	Disable SNMP v2c traps.
enable	Enable SNMP v2c traps.

config hosts

Parameter	Description	Type	Size	Default
id	Host entry ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

config switch-controller snmp-community

Configure FortiSwitch SNMP v1/v2c communities globally.

config switch-controller snmp-community
    Description: Configure FortiSwitch SNMP v1/v2c communities globally.
    edit <id>
        set events {option1}, {option2}, ...
        config hosts
            Description: Configure IPv4 SNMP managers (hosts).
            edit <id>
                set ip {user}
            next
        end
        set name {string}
        set query-v1-port {integer}
        set query-v1-status [disable|enable]
        set query-v2c-port {integer}
        set query-v2c-status [disable|enable]
        set status [disable|enable]
        set trap-v1-lport {integer}
        set trap-v1-rport {integer}
        set trap-v1-status [disable|enable]
        set trap-v2c-lport {integer}
        set trap-v2c-rport {integer}
        set trap-v2c-status [disable|enable]
    next
end

config switch-controller snmp-community

Parameter

Description

Type

Size

Default

events

SNMP notifications (traps) to send.

option

cpu-high mem-low log-full intf-ip ent-conf-change l2mac

Option	Description
cpu-high	Send a trap when CPU usage too high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).
l2mac	Send a trap for Learning event (add/delete/movefrom/moveto).

SNMP community ID.

integer

Minimum value: 0 Maximum value: 4294967295

name

SNMP community name.

string

Maximum length: 35

query-v1-port

SNMP v1 query port (default = 161).

integer

Minimum value: 0 Maximum value: 65535

161

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
disable	Disable SNMP v1 queries.
enable	Enable SNMP v1 queries.

query-v2c-port

SNMP v2c query port (default = 161).

integer

Minimum value: 0 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
disable	Disable SNMP v2c queries.
enable	Enable SNMP v2c queries.

status

Enable/disable this SNMP community.

option

enable

Option	Description
disable	Disable SNMP community.
enable	Enable SNMP community.

trap-v1-lport

SNMP v2c trap local port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-rport

SNMP v2c trap remote port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
disable	Disable SNMP v1 traps.
enable	Enable SNMP v1 traps.

trap-v2c-lport

SNMP v2c trap local port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port (default = 162).

integer

Minimum value: 0 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
disable	Disable SNMP v2c traps.
enable	Enable SNMP v2c traps.

config hosts

Parameter	Description	Type	Size	Default
id	Host entry ID.	integer	Minimum value: 0 Maximum value: 4294967295	0
ip	IPv4 address of the SNMP manager (host).	user	Not Specified

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

Web Application / API Protection

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

All Products

CLI Reference

config switch-controller snmp-community

config switch-controller snmp-community

config switch-controller snmp-community

config hosts

config switch-controller snmp-community

config switch-controller snmp-community

config switch-controller snmp-community

config hosts