config switch-controller traffic-sniffer

Configure FortiSwitch RSPAN/ERSPAN traffic sniffing parameters.

config switch-controller traffic-sniffer
    Description: Configure FortiSwitch RSPAN/ERSPAN traffic sniffing parameters.
    set erspan-ip {ipv4-address}
    set mode [erspan-auto|rspan|...]
    config target-ip
        Description: Sniffer IPs to filter.
        edit <ip>
            set description {string}
        next
    end
    config target-mac
        Description: Sniffer MACs to filter.
        edit <mac>
            set description {string}
        next
    end
    config target-port
        Description: Sniffer ports to filter.
        edit <switch-id>
            set description {string}
            set in-ports <name1>, <name2>, ...
            set out-ports <name1>, <name2>, ...
        next
    end
end

config switch-controller traffic-sniffer

Parameter	Description	Type	Size	Default
erspan-ip	Configure ERSPAN collector IP address.	ipv4-address	Not Specified	0.0.0.0
mode	Configure traffic sniffer mode.	option	-	erspan-auto
	Option Description erspan-auto Mirror traffic using a GRE tunnel. rspan Mirror traffic on a layer2 VLAN. none Disable traffic mirroring (sniffer).

config target-ip

Parameter	Description	Type	Size	Default
description	Description for the sniffer IP.	string	Maximum length: 63
ip	Sniffer IP.	ipv4-address	Not Specified	0.0.0.0

config target-mac

Parameter	Description	Type	Size	Default
description	Description for the sniffer MAC.	string	Maximum length: 63
mac	Sniffer MAC.	mac-address	Not Specified	00:00:00:00:00:00

config target-port

Parameter	Description	Type	Size	Default
description	Description for the sniffer port entry.	string	Maximum length: 63
in-ports <name>	Configure source ingress port interfaces. Interface name.	string	Maximum length: 79
out-ports <name>	Configure source egress port interfaces. Interface name.	string	Maximum length: 79
switch-id	Managed-switch ID.	string	Maximum length: 35