config router multicast6
Configure IPv6 multicast.
config router multicast6
Description: Configure IPv6 multicast.
config interface
Description: Protocol Independent Multicast (PIM) interfaces.
edit <name>
set hello-holdtime {integer}
set hello-interval {integer}
set rp-candidate [enable|disable]
set rp-candidate-group {string}
set rp-candidate-interval {integer}
set rp-candidate-priority {integer}
set static-group {string}
next
end
set multicast-pmtu [enable|disable]
set multicast-routing [enable|disable]
config pim-sm-global
Description: PIM sparse-mode global settings.
set bsr-allow-quick-refresh [enable|disable]
set bsr-candidate [enable|disable]
set bsr-hash {integer}
set bsr-interface {string}
set bsr-priority {integer}
set cisco-crp-prefix [enable|disable]
set cisco-ignore-rp-set-priority [enable|disable]
set pim-use-sdwan [enable|disable]
set register-rate-limit {integer}
config rp-address
Description: Statically configured RP addresses.
edit <id>
set group {string}
set ip6-address {ipv6-address}
next
end
set spt-threshold [enable|disable]
set spt-threshold-group {string}
end
config pim-sm-global-vrf
Description: per-VRF PIM sparse-mode global settings.
edit <vrf>
set bsr-allow-quick-refresh [enable|disable]
set bsr-candidate [enable|disable]
set bsr-hash {integer}
set bsr-interface {string}
set bsr-priority {integer}
set cisco-crp-prefix [enable|disable]
config rp-address
Description: Statically configured RP addresses.
edit <id>
set group {string}
set ip6-address {ipv6-address}
next
end
next
end
end
config router multicast6
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
multicast-pmtu |
Enable/disable PMTU for IPv6 multicast. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
multicast-routing |
Enable/disable IPv6 multicast routing. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config interface
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hello-holdtime |
Time before old neighbor information expires in seconds (1 - 65535, default = 105). |
integer |
Minimum value: 1 Maximum value: 65535 |
|
||||||
|
hello-interval |
Interval between sending PIM hello messages in seconds (1 - 65535, default = 30). |
integer |
Minimum value: 1 Maximum value: 65535 |
30 |
||||||
|
name |
Interface name. |
string |
Maximum length: 15 |
|
||||||
|
rp-candidate * |
Enable/disable compete to become RP in elections. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
rp-candidate-group * |
Multicast groups managed by this RP. |
string |
Maximum length: 35 |
|
||||||
|
rp-candidate-interval * |
RP candidate advertisement interval (1 - 16383 sec, default = 60). |
integer |
Minimum value: 1 Maximum value: 16383 |
60 |
||||||
|
rp-candidate-priority * |
Router's priority as RP. |
integer |
Minimum value: 0 Maximum value: 255 |
192 |
||||||
|
static-group * |
Statically set IPv6 multicast groups to forward out. |
string |
Maximum length: 35 |
|
||||||
* This parameter may not exist in some models.
config pim-sm-global
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
bsr-allow-quick-refresh * |
Enable/disable accept BSR quick refresh packets from neighbors. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
bsr-candidate * |
Enable/disable allowing this router to become a bootstrap router (BSR). |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
bsr-hash * |
BSR hash length (0 - 128, default = 126). |
integer |
Minimum value: 0 Maximum value: 128 |
126 |
||||||
|
bsr-interface * |
Interface to advertise as candidate BSR. |
string |
Maximum length: 15 |
|
||||||
|
bsr-priority * |
BSR priority (0 - 255, default = 0). |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
|
cisco-crp-prefix * |
Enable/disable making candidate RP compatible with old Cisco IOS. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
cisco-ignore-rp-set-priority * |
Use only hash for RP selection (compatibility with old Cisco IOS). |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
pim-use-sdwan |
Enable/disable use of SDWAN when checking RPF neighbor and sending of REG packet. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
register-rate-limit |
Limit of packets/sec per source registered through this RP (0 means unlimited). |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||
|
spt-threshold * |
Enable/disable switching to source specific trees. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
spt-threshold-group * |
Groups allowed to switch to source tree. |
string |
Maximum length: 35 |
|
||||||
* This parameter may not exist in some models.
config rp-address
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
group * |
Groups to use this RP. |
string |
Maximum length: 35 |
|
|
id |
ID of the entry. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
ip6-address |
RP router IPv6 address. |
ipv6-address |
Not Specified |
:: |
* This parameter may not exist in some models.
config pim-sm-global-vrf
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
bsr-allow-quick-refresh |
Enable/disable accept BSR quick refresh packets from neighbors. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
bsr-candidate |
Enable/disable allowing this router to become a bootstrap router (BSR). |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
bsr-hash |
BSR hash length (0 - 128, default = 126). |
integer |
Minimum value: 0 Maximum value: 128 |
126 |
||||||
|
bsr-interface |
Interface to advertise as candidate BSR. |
string |
Maximum length: 15 |
|
||||||
|
bsr-priority |
BSR priority (0 - 255, default = 0). |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
|
cisco-crp-prefix |
Enable/disable making candidate RP compatible with old Cisco IOS. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
vrf |
VRF ID. |
integer |
Minimum value: 1 Maximum value: 511 |
442055907 ** |
||||||
** Values may differ between models.
config rp-address
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
group |
Groups to use this RP. |
string |
Maximum length: 35 |
|
|
id |
ID of the entry. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
ip6-address |
RP router IPv6 address. |
ipv6-address |
Not Specified |
:: |