Known issues
The following issues have been identified in FortiLAN Cloud version 23.3. For inquiries about a particular issue, or to report an issue, visit the Fortinet Support website.
The following known issues are found in FortiLAN Cloud.
|
Issue ID |
Description |
|---|---|
| 832213 | You can apply the pool license to a maximum of 3 devices only. |
| 846593 | When deploying FortiAPs in bulk (> 100), the GUI takes longer (approximately 2 minutes) to load the data. |
| 932051 | The REST APIs for federated configuration templates do not work accurately. |
The following known issues are found in Wireless (FortiAPs).
|
Issue ID |
Description |
|---|---|
|
857725 |
Accurate configuration data is not pushed to the FortiAPs when the SSID is configured with the following.
|
| 935485 |
The captive portal does not work when the SSID is configured with WPA2 PSK as the authentication mode and FortiAP as the RADIUS client. |
The following known issues are found in Switch (FortiSwitches).
|
Issue ID |
Description |
|---|---|
| 910686 | Sometimes, the FortiSwitch status displays inconsistent data. |
|
931598 |
When configuring CLI commands in the ZTC configuration, pressing Enter does not start a new line, instead it saves the configuration. |
|
946889 |
The ZTC GUI LLDP profile is not pushed to the FortiSwitch if the Automatic Inter-Switch LAG is disabled. |
|
950865 |
Some fields are not updated in the FortiSwitch diagnostics page after a 5-10 minute interval post deployment. |