raid
Use this command to find and add a hard disk to the array unit after you insert a second hard disk into the drive bay.
|
This command is only available for some FortiMail platforms which support RAID. |
Syntax
execute raid add-disk
Example
You could notify the RAID controller to add the hard disk to the array unit after inserting a new hard disk.
execute raid
The CLI displays the following:
This operation will scan for new hard drives and add them into the RAID array
Do you want to continue? (y/n)
After you enter y (yes), if all hard disks have already been added to an array, the CLI displays the following:
existing raid disk at 12 is 120034123776
existing raid disk at 13 is 120034123776
no NEW disks in the system