Configuring dynamic firewall addresses for a Fabric connector
You cannot import address names to a Nuage Fabric connector. Instead you must create dynamic firewall objects that can be dynamically populated when FortiOS communicates with Nuage.
To configure dynamic firewall addresses for a Nuage Fabric connector:
- Go to Policy & Objects > Object Configurations.
- Go to Firewall Objects > Addresses.
- In the content pane, click Create New and select Address.
- Complete the following options:
Address Name
Enter a name for the firewall address object.
Type
Select Fabric Connector Address.
SDN
Select the Nuage Fabric connector.
Organization
Enter the name of the Nuage organization.
Subnet Name
Enter the name of the Nuage subnet.
Policy Group
Enter the name of the Nuage policy group.
- Set the remaining options as required, and click OK