Configuring dynamic firewall addresses for a Fabric connector

You cannot import address names to a Nuage Fabric connector. Instead you must create dynamic firewall objects that can be dynamically populated when FortiOS communicates with Nuage.

To configure dynamic firewall addresses for a Nuage Fabric connector:

1. Go to Policy & Objects > Firewall Objects > Addresses.
2. In the content pane, click Create New and select Address.
3. Complete the following options:

   Address Name	Enter a name for the firewall address object.
   Type	Select Dynamic.
   Sub Type	Select Fabric Connector Address.
   SDN Connector	Select the Nuage Fabric connector.

4. Set the remaining options as required, and click OK