Create a network for the FortiManager VM
You must create a network and subnet for the FortiManager VM in OpenStack. The following steps are completed in the OpenStack dashboard (Horizon), but the network and subnet can also be created using the OpenStack CLI.
To create the network using the OpenStack dashboard (Horizon):
-
In the OpenStack dashboard, go to Project > Network > Networks.
The Create Network dialog displays.
-
In the Network tab, configure the following and then click Next.
Network Name Enter a name for the FortiManager VM network. Enable Admin State Enabled. Create Subnet
Enabled.
-
In the Subnet tab, configure the following and then click Next.
Subnet Name Enter a name for the subnet.
Network Address
Enter the CIDR.
IP Version
Select IPv4.
Gateway IP
Enter a gateway IP or select Disable Gateway if you do not want to use a gateway.
-
In the Subnet Details tab, configure additional attributes as needed and then click Create.