Fortinet black logo

CLI Reference

Home FortiManager 5.6.8 CLI Reference

show

5.6.8
7.4.2
7.4.1
7.4.0
7.2.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.14
6.4.13
6.4.12
6.4.11
6.4.10
6.4.9
6.4.8
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.5
6.2.3
6.2.2
6.2.1
6.2.0
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.6.11
5.6.10
5.6.9
5.6.8
5.6.8
5.6.7
5.6.7
5.6.6
5.6.6
5.6.5
5.6.5
5.6.4
5.6.4
5.6.3
5.6.3
5.6.2
5.6.2
5.6.1
5.6.1
5.6.0
5.6.0
5.4.7
5.4.6
5.4.6
5.4.5
5.4.5
5.4.4
5.4.4
5.4.3
5.4.3
5.4.2
5.4.2
5.4.1
5.4.1
5.4.0
5.4.0
5.2.10
5.2.9
5.2.9
5.2.7
5.2.7
5.2.6
5.2.6
5.2.4
5.2.4
5.2.3
5.2.3
5.2.2
5.2.2
5.2.1
5.2.0
5.0.12
5.0.12
5.0.11
5.0.11
5.0.10
5.0.9
5.0.8
5.0.7
5.0.6
5.0.5
5.0.4
5.0.3
5.0.2
4.3.8
4.3.7
4.3.6
4.3.5
4.3.4
4.3.3
4.3.2
4.3.1
4.3.0
4.2.0
4.0.0
Copy Link
Copy Doc ID 52fcccd4-2590-11e9-94bf-00505692583a:823711
External
Download PDF

show

The show commands display a part of your Fortinet unit’s configuration in the form of commands that are required to achieve that configuration from the firmware’s default state.

Although not explicitly shown in this section, for all config commands, there are related show commands that display that part of the configuration.The show commands use the same syntax as their related config command.

CLI commands and variables are case sensitive.

Unlike the get command, show does not display settings that are assumed to remain in their default state.

Previous
Next

show

The show commands display a part of your Fortinet unit’s configuration in the form of commands that are required to achieve that configuration from the firmware’s default state.

Although not explicitly shown in this section, for all config commands, there are related show commands that display that part of the configuration.The show commands use the same syntax as their related config command.

CLI commands and variables are case sensitive.

Unlike the get command, show does not display settings that are assumed to remain in their default state.

Previous
Next