Central SD-WAN, FortiAP, and FortiSwitch templates included in ADOM revision

ADOM revisions now include SD-WAN templates, FortiAP profiles, and FortiSwitch templates when cetnral management for each is enabled. Previously ADOM revisions included only global policies, policy packages, and policy objects.

To include templates in ADOM revisions:

1. In the ADOM, ensure that central management is enabled for FortiAP, SD-WAN, and FortiSwitch.
   1. Go to System Settings > All ADOMs.
   2. Double-click the ADOM to open it for editing.
   3. Beside Central Management, select the checkbox for FortiAP, SD-WAN, and FortiSwitch.
   4. Click OK.

      Central management is enabled for FortiAP, SD-WAN, and FortiSwitch.

2. Create a profile or template for FortiAP, SD-WAN, and FortiSwitch.

   The following example describes how to create a profile for FortiAP.

   1. Go to AP Manager > WiFi Profiles.
   2. In the content pane, click Create New.
   3. Complete the options, and click OK.

      The profile is created.

      

   The following example describes how to create a template for FortiSwitch.

   1. Go to FortiSwitch Manager > FortiSwitch Templates.
   2. In the content pane, click Create New.
   3. Complete the options, and click OK.

      The template is created.

      

   The following example describes how to create a template for SD-WAN.

   1. Go to Device Manager > SD-WAN > SD-WAN Templates.
   2. In the content pane, click Create New.
   3. Complete the options, and click OK.

      The template is created.

      

3. Create a new ADOM revision.

   For example, name the revision rev01.

   1. Go to Policy & Objects, and click ADOM Revisions.

      The ADOM Revision dialog box is displayed.

   2. Click Create New.
   3. Complete the options, and click OK to create the ADOM revision.
4. In the ADOM, modify any of the templates for FortiAP, SD-WAN, or FortiSwitch.
5. Create a new ADOM revision.

   For example, name the revision rev02.

6. Restore ADOM revision rev01.
   1. Go to Policy & Objects, and click ADOM Revisions.
   2. Select the rev01 revision, and click Restore.

      

7. Ensure that the templates from ADOM revision rev01 are restored.

   In this example, check that the SD-WAN templates are restored.

   1. Go to Device Manager > SD-WAN > SD-WAN Templates.
   2. Review the templates.