(FortiAP) Unable to create an SSID with security mode WPA3_SAE.

Workaround: Use other security modes.

(FortiAP) Unable to add AP profile on hardswitch interface.

Synchronization on SD-WAN Orchestrator MEA causes FMG policy package status of Conflict.

Controller installation failed due to FMG script deleting IPsec interface failure.

Set tunnel IP failed as Subnets overlap between 'port1-E' with primary IP of 'port3-E.

Synchronization conflict occurs if device already has a VPN tunnel and the VPN interface is referred to by the firewall policy.

Workaround: Do not add a device with existing configuration to SD-WAN Orchestrator MEA, unless these configuration are supported in RETRIEVE_CONFIG mode.

Set WAN port type for MPLS and Private Line to enabled, and no underlay information is available in single device monitor.

Sometimes after deployment completes the FortiGate displays as offline.

Workaround: Re-add the device to SD-WAN Orchestrator MEA

If business rules include some applications, it produces conflicts.

The controller configuration script doesn't update when changing FMG objects.

In stress environment, all devices cannot be completely synchronized every time.

Failed to export debug info to zip file.