Creating new DMZ settings
When creating a profile, you can also create new DMZ settings.
To create new DMZ settings:
- Go to Configuration > Profile.
The list of profiles is displayed.
- Create a new profile, or open a profile for updating.
The Profile <name> dialog box is displayed.
- Click the Network tab.
The Network pane is displayed. For a description of the options, see Network tab.
- Expand the DMZ section, and click +Create New.
The DMZ dialog box is displayed.
Option
Description
Name
Type a name for the interface.
Port Type
Select the type of port. Choose from VLAN or AGGREGATE.
Physical Port
Available when Port Type is set to VLAN. Select the port number.
VLAN ID
Available when Port Type is set to VLAN. Type an ID for the VLAN.
Access Types
Select the types of access to allow on the interface.
- Complete the options, and click OK.
The DMZ setting is created.
- If you set Port Type to AGGREGATE, open the DMZ settings for editing, select interface members, and click OK.
Interface members are added to the DMZ settings.