Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Administration Guide

    Home FortiManager 7.0.5 Administration Guide
    7.0.5
    7.6.1
    7.6.0
    7.4.5
    7.4.4
    7.4.3
    7.4.2
    7.4.1
    7.4.0
    7.2.8
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.0.13
    7.0.12
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.4.15
    6.4.14
    6.4.13
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.7
    6.4.6
    6.4.5
    6.4.4
    6.4.3
    6.4.2
    6.4.1
    6.4.0
    6.2.13
    6.2.12
    6.2.11
    6.2.10
    6.2.9
    6.2.8
    6.2.7
    6.2.6
    6.2.6
    6.2.5
    6.2.3
    6.2.2
    6.2.1
    6.2.0
    6.0.12
    6.0.11
    6.0.10
    6.0.9
    6.0.8
    6.0.7
    6.0.6
    6.0.5
    6.0.4
    6.0.3
    6.0.2
    6.0.1
    6.0.0
    5.6.11
    5.6.10
    5.6.9
    5.6.8
    5.6.7
    5.6.6
    5.6.5
    5.6.4
    5.6.3
    5.6.2
    5.6.1
    5.6.0
    5.4.7
    5.4.6
    5.4.5
    5.4.4
    5.4.3
    5.4.2
    5.4.1
    5.4.0
    5.2.10
    5.2.7
    5.2.6
    5.2.4
    5.2.3
    5.2.2
    5.2.1
    5.2.0
    5.0.12
    5.0.11
    5.0.10
    5.0.9
    5.0.8
    5.0.7
    5.0.6
    5.0.5
    5.0.4
    5.0.3
    5.0.2
    4.3.8
    4.3.7
    4.3.6
    4.3.5
    4.3.4
    4.3.3
    4.3.2
    4.3.1
    4.3.0
    4.2.9
    4.2.8
    4.2.7
    4.2.6
    4.2.5
    4.2.4
    4.2.3
    4.2.2
    4.2.1
    4.2.0
    4.1.0
    4.0.3
    4.0.2
    4.0.1
    4.0.0

    Hyperscale policies

    Hyperscale policies

    In FortiManager, you can create hyperscale policies by configuring the policy package's policy offload level to Full Offload and enabling the policy types in the Display Options. For more information on hyperscale firewalls, see the FortiGate Administration Guide.

    Some hyperscale policy types must be enabled before they can be used. On the Policy & Objects pane, from the Tools menu, select Display Options, and then select the hyperscale policy checkboxes to display these options.

    Note

    Hyperscale policies are available in 6.2 and 6.4 ADOMs:

    • 6.4 ADOMs support hyperscale policies, NAT46 hyperscale policies, and NAT 64 hyperscale policies.
    • 6.2 ADOMs support IPv4 hyperscale policies, NAT46 hyperscale policies, NAT 64 hyperscale policies, and IPv6 hyperscale policies.
    To use hyperscale policies in a policy package:
    1. Go to Policy & Objects in supported a ADOM version on FortiManager.
    2. Create a new policy package, or right click an existing policy package from the tree menu, and select Edit.
    3. Under the Policy Offload Level option, select Full Offload, and click OK.
      Hyperscale policy types enabled in Display Options are now available in the policy package.
    To configure a hyperscale policy:
    1. Ensure you are in the correct ADOM.
    2. Go to Policy & Objects > Policy Packages.
    3. In the tree menu for the policy package, click the selected hyperscale policy.
    4. Click Create New, or, from the Create New menu, select Insert Above or Insert Below. By default, policies will be added to the bottom of the list. The Create New Policy pane opens.
    5. Configure the hyperscale policy settings, then click OK to create the policy:
      NameEnter a name for the policy.
      Incoming InterfaceSelect the incoming interface.
      Outgoing InterfaceSelect the outgoing interface.

      Source Address

      Select the source address.

      Destination Address

      Select the destination address.

      Service

      Select services and service groups.

      Action

      Select an action for the policy to take: ACCEPT or DENY.

      Comments

      Optionally, enter comments about the policy.

      Advanced Options

      Expand to view advanced options for the policy.

      Note

      When configuring a Hyperscale Policy in 6.4 ADOMs, there are fields to define IPv4 and IPv6 source addresses and destination addresses.

    Previous
    Next

    Hyperscale policies

    Hyperscale policies

    In FortiManager, you can create hyperscale policies by configuring the policy package's policy offload level to Full Offload and enabling the policy types in the Display Options. For more information on hyperscale firewalls, see the FortiGate Administration Guide.

    Some hyperscale policy types must be enabled before they can be used. On the Policy & Objects pane, from the Tools menu, select Display Options, and then select the hyperscale policy checkboxes to display these options.

    Note

    Hyperscale policies are available in 6.2 and 6.4 ADOMs:

    • 6.4 ADOMs support hyperscale policies, NAT46 hyperscale policies, and NAT 64 hyperscale policies.
    • 6.2 ADOMs support IPv4 hyperscale policies, NAT46 hyperscale policies, NAT 64 hyperscale policies, and IPv6 hyperscale policies.
    To use hyperscale policies in a policy package:
    1. Go to Policy & Objects in supported a ADOM version on FortiManager.
    2. Create a new policy package, or right click an existing policy package from the tree menu, and select Edit.
    3. Under the Policy Offload Level option, select Full Offload, and click OK.
      Hyperscale policy types enabled in Display Options are now available in the policy package.
    To configure a hyperscale policy:
    1. Ensure you are in the correct ADOM.
    2. Go to Policy & Objects > Policy Packages.
    3. In the tree menu for the policy package, click the selected hyperscale policy.
    4. Click Create New, or, from the Create New menu, select Insert Above or Insert Below. By default, policies will be added to the bottom of the list. The Create New Policy pane opens.
    5. Configure the hyperscale policy settings, then click OK to create the policy:
      NameEnter a name for the policy.
      Incoming InterfaceSelect the incoming interface.
      Outgoing InterfaceSelect the outgoing interface.

      Source Address

      Select the source address.

      Destination Address

      Select the destination address.

      Service

      Select services and service groups.

      Action

      Select an action for the policy to take: ACCEPT or DENY.

      Comments

      Optionally, enter comments about the policy.

      Advanced Options

      Expand to view advanced options for the policy.

      Note

      When configuring a Hyperscale Policy in 6.4 ADOMs, there are fields to define IPv4 and IPv6 source addresses and destination addresses.

    Previous
    Next