Creating FortiSwitch security policies
To create a FortiSwitch security policy:
- Go to FortiSwitch Manager > FortiSwitch Templates.
- In the tree menu, select Security Policy.
- In the content pane, click Create New in the toolbar. The Create New Security Policies window opens.
- Enter the following information, then click OK to create the new security policy.
Name
Type a name for the template.
Security mode
Select the security mode, Port-based or MAC-based.
User groups
Select the user groups that the security policy will apply to.
Guest VLAN
Enable a guest VLAN, and select the VLAN from the available VLAN objects. See Creating FortiSwitch VLANs.
Guest authentication delay second(s)
Set the guest authentication delay, in seconds (1 - 900, default = 30).
Authentication fail VLAN
Enable an authentication failure VLAN, and select the VLAN from the available VLAN objects. See Creating FortiSwitch VLANs.
This option is not available when Security mode is MAC-based.
MAC authentication bypass
Enable MAC Authentication Bypass (MAB).
EAP pass-through
Enable EAP pass-through. Override RADIUS timeout
Enable overriding the RADIUS timeout.