The host name of the device.

The device serial number.

The IP address of the device.

The platform type for the device.

FortiGate HA configuration on FortiManager is read-only. Standalone indicates non-HA mode. Active-Passive, Active-Active indicates the device is operating in a cluster.

The device system time and date information.

Displays the duration the device has been up.

The device firmware version and build number.

The number of CPUs and the amount of RAM for the device.

Displays whether the device is in NAT or Central NAT operation mode.

The status of VDOMs on the device.

Select one of the following:

• Connect to CLI via SSH to connect to the CLI console of the device
• Reboot to reboot the device
• Shutdown to shut down the device

Displays the Last Backup. You can backup or restore.

Displays the number of administrators configured on this device.

Toggle the switch ON or OFF to enable or disable ADOMs.

The VM license information.

The support contract information and the expiry date. The support contract includes the following: Registration, Hardware, Firmware, and Support Level e.g. Enhanced Support, Comprehensive Support.

FortiManager does not retrieve FortiCare Support information when the device was added using Add Model Device, even when the device is registered to the same FortiCloud account.

The contract version, issue date and service status. FortiGuard Services includes the following: Antivirus, Intrusion protection, Web filtering, and Email filtering.

The firmware version enforced on the device. The firmware version is enforced when FortiGate is connected to the network. Click the Edit icon to select the firmware version. You can also select the firmware version in the Add Device screen when adding a model device.

For more information, see Adding offline model devices.

The system template installed on the device. The system template is installed when FortiGate is connected to the network. Click the Edit icon to select the system template. You can also select the system template in the Add Device screen when adding a model device.

For more information, see Adding offline model devices.

The policy package installed on the device. The policy package is installed when FortiGate is connected to the network. Click the Edit icon to select the policy package. You can also select the policy package in the Add Device screen when adding a model device.

For more information, see Adding offline model devices.

Select View to display the configuration file of the FortiGate unit.

Displays the total number of configuration revisions and the revision history. Select Revision History to view device history. Select the revision history icon to open the Revision Diff menu. You can view the diff from a previous revision or a specific revision and select the output.

The synchronization status with the FortiManager:

• Synchronized: The latest revision is confirmed as running on the device.
• Out_of_sync: The configuration file on the device is not synchronized with the FortiManager system.
• Unknown: The FortiManager system is unable to detect which revision (in revision history) is currently running on the device.

Select Refresh to update the Installation Status.

Displays any warnings related to configuration and installation status:

• None: No warning.
• Unknown configuration version running on FortiGate: FortiGate configuration has been changed!: The FortiManager system cannot detect which revision (in Revision History) is currently running on the device.
• Unable to detect the FortiGate version: Connectivity error!
• Aborted: The FortiManager system cannot access the device.

Installation Tracking

• Modified: Some configuration on the device has changed since the latest revision in the FortiManager database. Select Save Now to install and save the configuration.
• UnModified: All configuration displayed on the device is saved as the latest revision in the FortiManager database.

Select the icon to display a set of commands that will be used in an actual device configuration installation in a new window.

The FortiManager system sent a configuration to the device at the indicated date and time.

A new configuration will be installed on the device at the indicated date and time.

Select Configure to view script execution history.

Displays the date when the last script was run against the managed device.

Click a configuration revision, and click View Config to view the configuration details.

Click a configuration revision, and click View Install Log to display the installation log.

Click a configuration revision, and click Revision Diff to view the difference between the current and previous revisions.

Click to retrieve a configuration and create a new revision.

The identification number for the configuration revision.

The date and time for the configuration revision.

The name of the device.

The name of the administrator who created the configuration revision.

The status of the installation for the configuration revision.