FortiManager Setup wizard

When you log in to FortiManager, the FortiManager Setup wizard is displayed to help you set up FortiManager by performing the following actions:

• Registering with FortiCare and enabling FortiCare single sign-on
• Specifying the hostname
• Changing your password
• Upgrading firmware (when applicable)

You can choose whether to complete the wizard now or later.

The FortiManager Setup wizard requires that you complete the Register with FortiCare step before you can access the FortiManager appliance or VM.

When actions are complete, a green checkmark displays beside them in the wizard, and the wizard no longer displays after you log in to FortiManager.

This topic describes how to use the FortiManager Setup wizard.

To use the FortiManager setup wizard:

1. Log in to FortiManager.

   The FortiManager Setup dialog box is displayed.

2. Click Begin to start the setup process now.

   Alternately, click Later to postpone the setup tasks. Some tasks cannot be postponed.

3. When prompted, register with FortiCare and enable FortiCare single sign-on. You must complete the Register with FortiCare step before you can access the FortiManager appliance or VM.
   

   When using FortiManager in an air-gapped environment, you must manually import your Entitlement File. See Licensing in an air-gap environment.

   
   
4. When prompted, specify the hostname.

   

5. In the Hostname box, type a hostname.
6. Click Next.
7. When prompted, change your password.

   

   1. In the New Password box, type the new password.
   2. In the Confirm Password box, type the new password again.
   3. Click Next.
8. When a new firmware version is available for your device on FortiGuard, the Upgrade Firmware option in the wizard indicates that a new version is available, and you can click Next to upgrade to the new firmware, or Later to upgrade later.
   
9. Complete the setup by clicking Finish.

   

   You are logged in to FortiManager.