Register Remaining Appliances

1. Open the folder for the next appliance to be registered.

2. Open the 2 PDF files.

3. Register the appliance.

   a. Click Register Product.

   b. Enter registration code from the PDF found in file FNC-CAX-xx_xxx

   (or if there is a Manager FNC-MX-xx.xxx).

   c. Click Next.

   d. If there was a POC or active evaluation license, a special page may display. If you are converting your POC to production, select Convert Evaluation. If you are not converting your POC to production, select Register.

   e. Enter “Managing Server” under Product Description (this can be edited later).

   f. Select Fortinet Partner (ignore all other fields).

   g. Click Next.

   h. Read terms and conditions.

   i. Click on radio button.

   j. Click Next.

   Note: “No Entitlement” will display. This is correct.

   k. Click on radio button to accept.

   l. Click Confirm.

   CAX(VM) product registration is now complete.

   m. Note the Serial Number (will be used to register the appliance support contract).

   n. Proceed to register the support contract for the appliance. Click Register More.

4. Register Support Contract for Appliance.

   a. Enter registration code found on pdf from file FC-10-NCxx_xxx.

   b. Click Next.

   c. Associate the support contract to the appropriate CAX(VM) Serial Number noted in previous step.

   d. If only one CAX(VM) is registered, there will only be on choice – select that radio button.

   e. If more than one CAX(VM) products are registered, select the appropriate CAX(VM).

   f. Click Next.

   g. Click on radio button in the lower left corner.

   h. Click Confirm.

   i. Support contract registration is now complete and applied to the CAX(VM).

   j. Close the PDF files used in the previous steps.

If there are additional CAX(VM)s to register (and its support contracts), click on Register More. Otherwise, click Done

* DO NOT REGISTER THE PROFESSIONAL SERVICES CONTRACTS *

Important: If a file for Professional Services (FP-10-PS-801-01-01.zip or FP-10-PS-830-01-01.zip) was included in the email, do not attempt to register. These are ONLY to be registered one at a time and on the day of the Professional Services session. One contract is like an “admission ticket” to the Professional Services session.

End result:

Once product registrations are complete, the summary page for each appliance will look similar to the example below. Note only the managing server (example below) will have license information listed.

Perpetual License Example:

Subscription License Example:

If assistance is needed with registering devices, contact Fortinet Customer Service.

Product Registration is complete. Proceed to next step.