What's new in F 7.2.3
Added platform support for new Fabric-F hardware models
New hardware to replace the current C-series. FortiNAC F 7.2.3 supports:
-
FortiNAC-CA-500F
-
FortiNAC-CA-600F
-
FortiNAC-CA-700F
-
FortiNAC-M-550F
Important notice
F-Series appliances (550F, 600F, 700F) MGMT port, port 3 and port 4 are reserved for future use.
Only ports 1 and 2 can be configured in FortiNAC v7.2.3.
Important notice
Enhancements were made to the communication method between FortiNAC servers for security. Due to this change, all FortiNAC servers must have additional configuration in order to communicate. The following procedure should be done prior to upgrade to prevent communication interruption.
Follow the instructions for the appropriate appliance (if FortiNAC Manager is not used, these steps can be skipped):
-
Pre-upgrade procedure (FNC-M-xx): FortiNAC appliances running on CentOS
-
Pre-upgrade procedure (FNC-MX-xx): FortiNAC appliance running on FortiNAC-OS