Set device mapping for unknown SNMP devices
If an SNMP Device is added to the Topology, but the device could not be identified by the OID, the option will be available to set the device mapping.
- Select Network Devices > Topology.
- Right-click on the device marked with a question mark icon.
- Select the Set Device Mapping option from the menu.
Settings
Field |
Definition |
---|---|
Delete Existing Mapping |
Removes the custom mapping currently set for that model. Once the mapping is removed, the device icon will revert to a “?” until another mapping is set or device support is added for the device’s system OID. Note: This button will not display in models that are using system defined mappings. |
Name |
Name of the selected device. |
OID |
Detected OID of the selected device. |
Description |
Description of the device read via SNMP or supplied within the Element details. |
Standard Bridge MIB |
Whether or not the device appears to support the standard Bridge MIB, 1.3.6.1.2.1.17. |
Standard VLAN MIB |
Whether or not the device appears to support the standard Switch VLAN MIB, 1.3.6.1.4.1.207.8.9.2.5.2. |
Standard IP MIB |
Whether or not the device appears to support the standard IP MIB, .1.3.6.1.2.1.4.28. |
Current Mapping |
The source used for the current Device Mapping for the selected device. If modeled as an existing device mapping, this will list the OID of the device it cloned. |
Report Mapping Details to Bradford |
If checked, the details of this mapping will be e-mailed using the configured mailer to Fortinet, so we may add them to our product. The e-mail sends only the following information:
|
Model this Device as a Generic SNMP Device |
The device will be managed using the available SNMP MIBs. It may require additional details in the Model Configuration to specify VLANs. |
Model this Device as a Device Type |
The device is not manageable using standard SNMP MIBs. It may be modeled as an SNMP enabled network device of the type specified in the drop-down. |
Model this OID from an Existing Device |
All devices with the same OID will be mapped when this is selected, if they have not already been mapped as a Generic SNMP Device or Device Type. This OID will have all properties copied from an existing Device Model. Double click a Device Model to see more information. |
Device Model |
The name of the Device Model copied to this OID. Typing in this field will search the Device Mappings table based on both OID and Model. |