Configuring network access policies
If you initialized network access policies to include the pre-defined sample configuration, then the pre-defined logical networks are assigned network access policies. By default, these policies are disabled.
Creating a policy
- Go to Policy & Objects.
- Click Network Access.
- Click Add.
- Select Enabled.
- Set a Name for the policy.
- Use the drop-down list to select a User/Host Profile.
- Use the drop-down list to select a Network Access Configuration.
- (Optional) Enter a Note.
- Click OK.
Modifying a policy
- Go to Policy & Objects.
- Click Network Access.
- Click the policy and click Modify.
- Modify the Name, User/Host Profile, Network Access Configuration, and/or Note.
- Click OK.
Disabling a policy
- Go to Policy & Objects.
- Click Network Access.
- Click the policy and click Modify.
- Deselect Enabled.
- Click OK.
Deleting a policy
- Go to Policy & Objects.
- Click Network Access.
- Click the policy and click Delete.
You cannot delete a policy that is currently in use.
- Click Yes to confirm.