RAP Wired Port Integration
Fortinet supports management of end-stations connected to the wired ports on certain Aruba APs (e.g., RAP-3WNP). End-stations are managed much the same as wireless stations. The ports must be configured to send RADIUS authentication to FortiNAC (MAC-Authentication or 802.1x).
To find these configurations on compatible Aruba controllers, do the following:
-
Go to Configurations > AP Configuration, and then select an AP group.
-
Expand the AP section to display the list of ethernet interfaces for the APs.
-
Expand an interface to display its configuration.
-
Select the appropriate profiles for port management.
-
Use the same AAA profile you configured for wireless communication with FortiNAC.
If configured correctly, you will receive a RADIUS authentication request when a station connects to the corresponding wired port on the AP(s).