config system syslog1 settings

Use this command to configure a remote server settings and the syslog is sent to this server. The default port number is 514.

Syntax

config system syslog1 settings
   Set ipaddr <ip_address>
   Set port <port>
   Set status {enable | disable}

Variable	Description	Default
ipaddr <ip_address>	IP address of a remote server.
port <port>	Port number of remote server used to receive syslog.	514
status {enable | disable}	Enable the status to send syslog to a remote server. Disable this option to not send any syslog.