config system fortiguard update
Use this command to configure how FortiNDR will retrieve the most recent Fortiguard Neural Networks engine and database updates.
Syntax
config system fortiguard update
set scheduled-update-day <day_int>
set scheduled-update-frequency {daily | every | weekly}
set scheduled-update-status {enable | disable}
set scheduled-update-time <time_str>
set tunneling-status {enable | disable}
set tunneling-address {web_proxy_address}
set tunneling-port {web_proxy_port}
set tunneling-username {proxy_user_name}
set tunneling-password {proxy_user_password}
end
|
Variable |
Description |
Default |
|---|---|---|
|
|
Enter the day of the week at which FortiNDR will request updates where
the range is from |
|
|
|
Enter the frequency at which FortiNDR will request updates. You also need to configure
|
|
|
|
Enable to perform updates according to the configured schedule. |
|
|
|
Enter the time of the day at which FortiNDR will request updates, in
the format |
|
|
tunneling-status {enable | disable} |
Turn proxying FDS communication on and off. |
disable |
|
tunneling-address <web_proxy_address> |
Set IP (ipv4/ipv6) of web proxy server that FortiNDR will be using to communicate with FDS servers. |
0.0.0.0 |
|
tunneling-port <web_proxy_port> |
Set port of web proxy server that FortiNDR will be using to communicate with FDS servers. |
0 |
|
tunneling-username <proxy_user_name> |
Set user name of web proxy server that FortiNDR will be using to communicate with FDS servers. |
|
|
tunneling-password <proxy_user_password}> |
Set user password of web proxy server that FortiNDR will be using to communicate with FDS servers
|
|