Supported models
FortiNDR version 7.6.1 supports the following models:
| Model |
Mode |
Details |
|---|---|---|
|
FortiNDR-3600G |
Center |
|
| FortiNDR-1000F |
Standalone and Sensor |
|
|
FortiNDR-3500F gen3* |
Standalone and Center |
Supports FortiNDR central management. For hardware details please visit hardware quick start guide or the following notice. |
|
FortiNDR VM 08 |
Sensor |
Requires Center to manage. Supported for ESXi, KVM, AWS, GCP, Azure only. |
| FortiNDR VM 16 & 32 |
Standalone and Sensor |
|
|
FortiNDR Centralized Management VM |
Center |
Supported on ESXi and KVM only |
| FortiNDR on AWS (BYOL) | Standalone, Sensor and Center | |
| FortiNDR on Alibaba (BYOL) | Standalone | |
|
FortiNDR on Azure (BYOL) |
Standalone, Sensor and Center |
|
|
FortiNDR on GCP (BYOL) |
Standalone, Sensor and Center |
|
|
FortiNDR KVM |
Standalone and Sensor |
|
|
FortiNDR on Nutanix |
Standalone, Sensor and Center |
Nutanix version AOS 7.3.1 |
*Notice about hardware generations
|
The hardware model is printed on the label on the back of the unit. |
- FortiNDR gen3 - P24935-03 supports v7.1.x, v7.2.x, 7.4.x and 7.6.x
-
FortiAI gen1 - P24935-01 does not support 7.1.x 7.2.x 7.4.x
-
FortiAI gen2 - P24935-02 does not support 7.1.x 7.2.x 7.4.x
To confirm the hardware generation with the CLI:
get system status
This allows you to check the BIOS version. Gen3 models use BIOS version 00010032 and above. Any version below 00010032, such as 00010001, indicates a Gen2 or Gen1 model.