Fortinet black logo

User Guide

Home FortiPortal 6.0.5 User Guide
6.0.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.0.15
6.0.14
6.0.13
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.3.8
5.3.7
5.3.6
5.3.5
5.3.4
5.3.3
5.3.2
5.3.0
5.2.0
4.1.0

Page actions

Page actions

The following actions are available on the SD-WAN Monitoring tab:

  • View—choose the type of view (Site or Device)

  • Scope—view widget output (All or site)

    The Scope option is only available for Site view.

  • Device—use the dropdown to view widget output for a device

    The Device option is only available for Device view.

  • Filter—filter the data (Last 5 Minutes, Last 30 Minutes, Last 60 Minutes, Last N Minutes, Last 4 Hours, Last 12 Hours, Last N Hours, Last 1 Day, Last 7 Days, Last N Days, Last N Months, or Specify)

When you set the filter to last N Minutes/Hours/Days/Months, a search box appears next to Filter. Enter a value for N and click Search to apply this filter.

The widgets and graphs for your monitor are updated according to your selection in Filter and the value entered in the N search box.

Previously selected time range in Dashboard, Log View, or Reports is automatically applied to Monitors.

You can zoom in and out of the map by rotating the wheel, or use the + or - buttons to zoom in and out respectively.

SD-WAN Status

Click the devices in the map to open the SD-WAN Status window containing performance related information in a table.

In the SD-WAN Status window, select a device to open the Monitoring dashboard. The Monitoring dashboard includes a set of widgets similar to those in the previously available Device Manager > SD-WAN > Monitoring:

  • Summary.

  • Traffic Overview.

  • Bandwidth Overview: Total bandwidth and bandwidth per interface.

  • Link health: Jitter, latency, and packet loss.

Use the Set Filter dropdown available at the top of the Monitoring dashboard to filter the data (Today, Last 1 day, Last 1 week, Last 1 month, or Specify).
Previous
Next

Page actions

The following actions are available on the SD-WAN Monitoring tab:

  • View—choose the type of view (Site or Device)

  • Scope—view widget output (All or site)

    The Scope option is only available for Site view.

  • Device—use the dropdown to view widget output for a device

    The Device option is only available for Device view.

  • Filter—filter the data (Last 5 Minutes, Last 30 Minutes, Last 60 Minutes, Last N Minutes, Last 4 Hours, Last 12 Hours, Last N Hours, Last 1 Day, Last 7 Days, Last N Days, Last N Months, or Specify)

When you set the filter to last N Minutes/Hours/Days/Months, a search box appears next to Filter. Enter a value for N and click Search to apply this filter.

The widgets and graphs for your monitor are updated according to your selection in Filter and the value entered in the N search box.

Previously selected time range in Dashboard, Log View, or Reports is automatically applied to Monitors.

You can zoom in and out of the map by rotating the wheel, or use the + or - buttons to zoom in and out respectively.

SD-WAN Status

Click the devices in the map to open the SD-WAN Status window containing performance related information in a table.

In the SD-WAN Status window, select a device to open the Monitoring dashboard. The Monitoring dashboard includes a set of widgets similar to those in the previously available Device Manager > SD-WAN > Monitoring:

  • Summary.

  • Traffic Overview.

  • Bandwidth Overview: Total bandwidth and bandwidth per interface.

  • Link health: Jitter, latency, and packet loss.

Use the Set Filter dropdown available at the top of the Monitoring dashboard to filter the data (Today, Last 1 day, Last 1 week, Last 1 month, or Specify).
Previous
Next