Configuring an address group

Address and address group firewall objects support IPv6 addresses.

To configure an address group:

1. Go to Security > Firewall Objects.
2. Select Address in the firewall object type dropdown.
3. In the Create dropdown, select Address Group or select an existing address group from the list and click Edit.
4. In the form, enter the following information:

   Settings	Guidelines
   Name	Required. Enter a name for the address group.
   Color	From the dropdow, select a color option.
   Members	Required. From the dropdown, select an address.
   Comments	Enter comments about the address group.

5. Click Save.